Career planning book for mechanical industry

Books on career planning in mechanical industry (5 selected articles)

Time can't be seen or touched. Just when you don't pay attention, it has quietly passed by you. I believe everyone is full of expectations for the upcoming work and life! Let's make a plan for our career. In order to make you no longer have a headache for career planning, here are five career planning books (selected) in the mechanical industry that I have compiled for you. Welcome to share.

Career Planning Book of Mechanical Industry 1 I. Introduction to Planning

Nowadays, the social competition is fierce, which we can't ignore. As a college student, career planning is necessary. A correct understanding of ourselves is the premise and foundation of our career planning, and a correct life path needs correct ideal guidance. Since I entered the university, I have been thinking about my future, my career, and now I am still a freshman. After Holland's professional interest test, MBTI test system, comprehensive quality evaluation system and mental health evaluation system, I know my professional interest, professional values, personality, preferences and suitable occupation. After nearly a semester of thinking and summing up, I am sure that I can plan my career correctly. Career planning is the main guide for my future study, life and work. I divide my career into four stages:

1, career preparation period;

2. Early career;

3. Mid-career;

4. Late career. Each stage has different ability requirements and development goals. We should develop ourselves according to the specific situation, enrich ourselves, improve our comprehensive ability to adapt to the requirements of social development and make contributions to social development.

Second, self-exploration

(1) Analysis of Evaluation Results

The evaluation results of college students' career planning show that my personality types are introversion, feeling, thinking and perception. I am frank, honest and pragmatic, and I like action rather than rambling. I am modest and know how to finish the work. I am good at analysis, so I am interested in the principle of objective implication. I have a natural understanding of technical things, and I am usually good at using tools and doing manual work. I tend to make organized and confidential decisions, and just state the facts in an organized and direct way according to what I have seen. I'm curious and observant. Only rational and reliable facts can convince you. I value facts, which is a treasure house of knowledge that I know very well. I am a realist, so I can make good use of available resources and seize opportunities, which makes me pragmatic. I am taciturn, often appear aloof and shy, except when I am with my good friends. I am equal and fair. I am often driven by impulse, and I have considerable adaptability and responsiveness to the challenges and problems at hand.

I like outdoor activities and sports because I like action and exciting things. Through the assessment, I understand my personality characteristics from different dimensions. The evaluation results are in line with my personality characteristics. I have always been an introverted person, and I am not good at making friends with others. Introversion and calmness remain the same character. For so many years, I have been looking for ways to change my withdrawn personality, but no, I am still myself. I haven't changed anything and I can't change anything.

(2) Self-analysis

Self-evaluation: diligent, honest and helpful; Withdrawn, taciturn and unsociable.

Mechanical industry career planning book 2 has set a plan for itself. Nowadays, the important shortage of highly skilled personnel who master manufacturing technology is still one of the biggest bottlenecks that limit the economic and industrial growth of China. Students in higher vocational colleges in China have more practical skills and bright prospects, but how to become high-skilled talents and what to do are worthy of scrutiny.

First, self-analysis, self-analysis is the basis of career planning, which is actually the mold manufacturing technology.

Therefore, it is an inevitable factor, objective and profound, and it will never escape its own shortcomings and flaws. In terms of self-analysis, the authorities are fascinated and the bystanders are clear. We can't refer to the opinions of experts such as family members, classmates and teachers, but we will try our best to analyze our real factors.

1, my major is mold design and manufacturing, which is a major of the college. My major is very good. It is also because some of my relatives know that mildew is developing very well now, and I am also very interested in mildew, so I have a broad horizon for my career. I want to learn professional courses well, first of all, I must learn professional basic courses well. For example, Mechanical Drawing is a course that all mechanical students should practice. From the moment I knew what a mold was, I understood that understanding drawings was the first step. Otherwise, how to process, how to produce, let alone plan. Our major is not only practical knowledge, mold design. Our focus is on hands-on operation, that is, the combination of practice and practice. Look at the course of mold manufacturing technology, combining theory with practice. I have a good grasp of my own knowledge, and my shooting ability has also been tempered in my internship, which has cultivated my serious and careful attitude and habits.

I know that it is not enough to learn professional knowledge well during school. In the key link of our life, the cultivation of ability is also extremely important. Society needs not only skilled people, but also mature people with ability, which makes me analyze the importance of tempering my own ability. Foxconn Mould Manufacturing Company is the company where I will work in the future. I also learned about this company through various channels. As a student, I am currently working in the Student Union. What I learned is not how to do my own thing well, but how to communicate with people and get along with them. I cultivated my organizational ability, and more importantly, I analyzed the importance of teamwork and listened to the mold manufacturing technology. In a word, the resumes of my classmates have a great influence on me, which should not be underestimated in the future. It is also a valuable experience in my life and laid the foundation for my career choice after graduation.

3. My weakness: my current lack of technology or ability, and my innate weakness. I know that I am too soft-hearted to learn a career. In other words, I can't make up my mind, which is fatal. I'm sad that I can't make a decision according to the situation. In fact, I am the kind of person who pursues perfection. When I finish something, I will always remember it until I get into it. Even if it's perfect, I'm still a little worried

My social experience is better than that of other students, but after studying several subjects, my ability of topic management is not very good. In addition, sometimes you can't see your temper when you look at the topic, which is fatal, so this is also a key point that I am trying to change.

Second, determine my career growth target. I know that the setting of life object is the core of my professional life planning.

1, the success or failure of a private enterprise depends on the mold manufacturing technology. Compare the mold manufacturing process. Much depends on whether there is an accurate and suitable object. I study technology and say I have a good chance. After graduation, I will become a mold employee trained by the company. However, my wings are not full, mold manufacturing technology. In other words, my skills are not solid enough and my experience is not rich enough. My medium-term goal is to become a die assembler after accumulating necessary experience. Then there is mold designer, even the technical director of the mold design department. Mold design and manufacture. Because I am now a higher vocational student at school, and social changes are unpredictable, opportunities and strength are unpredictable, so I will learn to seize the opportunity in my hand and not let it slip away from my fingertips.

2. What should I do now? Now that I have a sober analysis of myself, I think a student should only know clearly what he should learn and work hard for it. I will try my best to review the following basic knowledge of school rules in the rest of the time: mechanical manufacturing foundation, tolerance and cooperation, electronic and electrical foundation, mechanical drawing and so on. I think that only by learning the professional foundation and specialized courses well can we lay a good foundation.

Compare the mold manufacturing process. As for professional knowledge, it is better to practice a few softwares well. It is said that only by practicing thoroughly can you master professional knowledge and be competent in the future. Now that I have made a career plan, I think I will study my professional knowledge hard in the next days.

Third, it's not enough, whether it's mold design or anything. In short, knowledge will never be finished, and learning is endless.

I believe that my life will only flourish and make progress in the warm sunshine.

As the saying goes, an inch of time is worth an inch of gold, but a thousand dollars can't buy an inch of time. Time flies, and before I know it, I'm halfway through my junior year. In less than a year, my classmates will all go their separate ways for their future. Looking back on the past two years, I have gained a lot and have too many regrets. Therefore, in order to make better use of the only one-year college time, clearly understand their own strengths and weaknesses, and what career development is suitable for, this plan is specially formulated. First of all, the following is the self-awareness part:

First, the basic situation:

Name: xx

Gender: male

Date of birth:

Education: Grade three.

Major: mechanical design, manufacturing and automation.

Hobbies: human history, science, nature, tourism (more widely)

Personality characteristics: both internal and external cultivation, tend to understand things rationally.

Advantages:

1. People who think they are idealistic, thoughtful, disciplined, confident and self-aware; Abide by the law, have a correct attitude, adhere to principles and have a strong sense of responsibility; Love life, be positive and optimistic, learn from others' strengths and make up for your own shortcomings.

2. I have a digestion that is good at learning self-optimization, a heart that is sincere and kind to people, respects honesty, is good at cultivating interest, and attaches importance to practical exploration.

Disadvantages: poor eloquence and poor communication. Easy-going trust, weak planning. The way of doing things is inflexible.

Second, the social environment and occupation analysis

1. Overall social environment

With the rapid development of science and technology and global economic integration, China's political stability and sustained and stable economic development are playing an increasingly important role in global economic development. Especially after China's accession to the WTO, multinational enterprises have poured into the China market, prompting China enterprises to constantly improve their competitiveness and strive to go abroad. It has formed a new competitive pattern of "internationalization of domestic market and internalization of international competition". However, in the final analysis, the competition between enterprises is the competition for talents, which makes the competition for talents more and more fierce. Therefore, how to remain invincible in social competition has become a problem that job seekers must face and solve today.

2. Professional analysis of mechanical design, manufacturing machinery and its automation.

This major cultivates the basic knowledge and application ability of mechanical design and manufacturing, and can engage in design and manufacturing, scientific and technological development and application research in the field of mechanical manufacturing in the front line of industrial production. Based on mechanical design and manufacturing, it integrates computer science, information technology and automatic control technology. The main task is to use the theory and method of advanced design and manufacturing technology to solve complex technical problems in the field of modern engineering and realize intelligent design and manufacturing of products. Senior engineers and technicians engaged in operation management and sales. After graduation, I can engage in the design and development of mechanical and electrical products, the compilation of mechanical manufacturing process regulations, the design of process equipment, the monitoring, testing and analysis of product quality, the management and maintenance of mechanical equipment, and the operation, organization and management of the production process of mechanical and electrical products.

3. Analysis of the present situation of machinery industry

1), the industry is big but not strong. Including power generation equipment, CNC metal cutting machine tools, automobiles and other industrial products, the output ranks first in the world, and the total export trade of machinery industry ranks first in the world. However, the innovation ability of the industry is not strong, and the core competitiveness of the industry is insufficient. The effective patents in China are still mainly utility model and design patents, and the number of invention patents only accounts for 13.8%. Most export products are produced by OEM, and less than 20% have their own brands. The independent innovation ability of industry is weak, so it is difficult to effectively support structural upgrading and promote emerging industries independently; The development of basic technology, key basic components, basic technology and special high-quality raw materials lags behind, which can not meet the needs of mainframe development and relies heavily on imports, resulting in the development of mainframe being controlled by people; In 20xx, the import value of the whole industry was as high as 654.38+07 billion US dollars, which highlighted the level gap between China's machinery industry and developed countries in the world.

2) The contradiction of industrial structure restricts development. The adjustment of industrial structure is a systematic project, involving the adjustment of organizational structure, regional structure, technical structure, product structure, investment structure, foreign trade structure and talent structure. At present, the outstanding problem is that the rapid expansion of production capacity in machinery industry and excessive competition in low-end fields have and will further lead to the decline of self-accumulation ability, which seriously affects the self-development ability of enterprises; Industrial development relies too much on traditional processing and manufacturing industry, and modern manufacturing service industry is very weak, which makes little contribution to industrial development; The organizational structure of the enterprise is scattered and weak, and it does not have the dialogue strength commensurate with the large users. In addition, there is still a considerable gap between the overall level of manufacturing informatization in China and developed countries in the world. Among the top 500 Chinese enterprises in 20xx, only 6.4% are at the international leading level, 34.5% are at the level of moderately developed countries, and the proportion of private enterprises in the top 500 enterprises is only 16.8%.

3) The growth rate of market demand slows down from high to low. With the process of industrialization and urbanization in China, the demand for machinery and equipment will continue to grow for a long time.

At the same time, thanks to the comparative advantage of cost performance, the international market share will also maintain an upward trend. However, with the development of industrialization in China entering the middle and late stage, the high-speed growth of machinery and equipment demand will gradually slow down. In the post-crisis era, more and more countries are constantly raising the market access threshold of mechanical products, which will inevitably cause difficulties for China to continue to expand its exports. Therefore, we must have a clear understanding of the gradual slowdown of market demand in the future.

Third, career planning.

1. The planning during the school period is as follows: (20XX~20XX years)

Now I am a junior, and I will face employment soon. From now on, I will make good use of my study time in college, set up my personal career goals, complete my studies with diligence, and strive to obtain a CAD senior technician certificate and a CET-6 certificate, so as to find a job as a professional technician in relevant companies with my own advantages and solid professional foundation.

1) Ideological and moral aspects: establish a correct outlook on life, values and struggle, and adhere to the correct orientation of life values.

2) Science and technology: While studying professional skills seriously, make full use of the information in the school library, bookstore and network, broaden your horizons, expand your knowledge, and try the practice of professional design.

3) Stylistic and physical and mental development: actively participate in cultural and sports activities inside and outside the school and community speech competitions, fully exercise your courage and show your personal ability.

4) Skills training: Although I passed the CET-4 qualification examination, the goal never stopped there, so I applied for CET-6 again and participated in the training of cad senior draftsmen. After long-term unremitting efforts, I firmly believe that I can successfully pass the qualification examination. As we all know, computers are the world now. As an excellent college graduate, how can I live up to these three words without knowing some basic computer knowledge and programming knowledge? So, I taught myself C language and took the computer level 2 exam. Although I failed, I'm not going to give up. I will continue to do well in the exam next semester and work hard. Then I will learn a three-dimensional drawing software PROE to meet the market demand.

5) Academics: Improve one's own quality, ensure the quality of study, pay attention to lectures when studying, review and make comprehensive analysis, and not only accumulate knowledge in a broad sense, but also have special methods. The task of this semester may increase the pressure, so we should find our own position, adjust our mentality and lay a good foundation for further study.

6) Job hunting: The main content is to participate in professional or related summer jobs, exchange job hunting experience with classmates, collect relevant company information, and participate in recruitment activities inside and outside the school.

2. The first five-year plan after graduation: (20XX~20XX years)

My first goal is to "gain a foothold" and complete the transformation from a student to an independent professional with greater responsibilities. I think it will take two years at most, maybe longer. To sum up, I have been a good student in the eyes of teachers and a good boy in the eyes of parents for 17 years from my primary school to my college studies, and I lack the ability to contact unfamiliar environments independently. For many people, two years is a long time; But for me, two years is not much time. Learn to walk before you run. My second goal in five years is to work hard and have a certain economic foundation.

3. The ultimate goal

Become a senior design engineer in the mechanical industry, do in-depth research in his own field, in order to reach a certain height and try his best to serve the society.

Fourth, the explanation of this profession.

On the premise that the general direction remains unchanged, we should make corresponding adjustments according to current events, be flexible, and not encounter too many setbacks because of too much pressure. From time to time, you should come up with your own career planning book to motivate yourself, strive to break through one by one, and finally realize your life ideal.

Career planning book of mechanical industry 4 I. Preface

When starting a business, be prepared to fail at least ten times. If your product is developed and nobody cares about it, don't give up and find a reason to come back quickly; If the second edition of your product comes out, no one cares, don't worry, you still have eight chances to try and make mistakes ... but please remember: before your product is verified by users, if you want to save every copper coin, startups will only succeed if they try and make mistakes, tolerate failures, fail repeatedly and struggle hard.

Career planning is an effective means; For everyone, career is limited, and life and time will be wasted without effective planning.

Life is enriched by dreams, and life is wonderful by hard work. Career planning helps us achieve a better life.

Name XX

The planning period is five years.

From May 20xx to May 20xx.

The age range is 2 1 to 26 years old.

The stage goal is to graduate smoothly; Become an experienced mechanic;

The overall goal is to become a successful mechanical design professional.

Second, self-assessment.

I am an only child and the best hope of my family. Being a useful person is the hope of all relatives and friends. I am outgoing, cheerful and lively. I like making friends, listening to music, going out for a walk and surfing the Internet in my spare time. I like reading novels, biographies of celebrities, especially magazines. My idols are Zhou Enlai and Wu Yi. They usually get along well with others. Deeply loved by relatives, friends and teachers, I like innovation and have strong hands-on ability, but I lack perseverance and perseverance, and sometimes I am sentimental. But I always feel that I sometimes lack self-confidence and don't like others to comment on myself behind my back. Sometimes a little headstrong, a little overbearing. Solve the disadvantages of self-inventory. Although perseverance alone is not enough, you can spur yourself with your positive enthusiasm. Over time, I think it will be cultivated slowly. And I should make full use of the advantages of the huge group of relatives and friends who have been caring for and supporting me, and sincerely ask my classmates, teachers and friends to point out their shortcomings in time. Although it is difficult to change my personality, I must learn to control myself, leave a good impression on others and pave the way for my success.

Third, the occupation analysis

The two most common expectations of young mechanical engineers in the next five years are continuing education and career guidance (experienced advice, consultation and role models); Among middle-aged mechanical engineers, the greatest expectation in the next five years is continuing education, career planning and ability renewal; For experienced mechanical engineers, the main expectation in the next five years is to continue their studies, seek new jobs and plan their future. It can be seen that in the United States, the new requirements of the new economy are reflected in the ideal and future design of mechanical engineers. Everyone wants to continue their studies and change careers first, and they all require themselves to constantly adapt, constantly learn and improve, and seek more suitable self-realization. This is very different from the previous employment concept, goal and career choice. If we look around a little carefully, this trend is coming to us quietly.

Lifelong learning and being good at learning are essential qualities for mechanical engineers. The new era in which we live is characterized by unlimited opportunities and challenges and endless learning. Stopping learning is the beginning of being eliminated. If the existing knowledge is not updated, it will soon become obsolete.

In addition, it is very important for engineers to exclude the purely technical view of innovation. "The best technology may not succeed, and the market will eventually beat technology" (Chambers). Moreover, mechanical engineers should not only have content knowledge (what to do and why), method knowledge (how to do it and who to do it), but also have rules knowledge (how to do it and who to do it, what to do and what not to do ...). The tradition of Harvard Business School is to attach importance to the thinking process of drawing conclusions, not whether it can get the correct answer. Learning is more important than learning, and methods are more useful than knowledge.

Mechanical engineers should constantly carry forward their traditional fine qualities, such as seriousness, rigor, strong logic, comprehensive balance, pursuit of accuracy, systematicness, combination with reality and strong hands-on ability. At the same time, they should overcome the weakness of mechanical thinking, easy to see things but ignore people, technology first and ignore the market, strengthen the study and mastery of information technology and management technology, and become compound engineers needed by mechanical manufacturing and non-mechanical industries in the new era, which is also a new opportunity for mechanical engineers in China under the new situation.

Fourth, career orientation.

1. Have a solid foundation in natural science and culture, a good foundation in humanities, arts and social sciences, and the ability to correctly use the spoken and written languages of the nation;

2. Systematically master the extensive technical and theoretical basic knowledge of this major, including mechanics, mechanics, electrical and electronic technology, mechanical engineering materials, mechanical design engineering, mechanical manufacturing foundation, automation foundation, market economy, enterprise management, etc.

3. Have the basic skills of drawing, calculation, experiment, testing, literature retrieval and basic process operation necessary for this major;

4. Have the necessary professional knowledge in a certain professional direction in this professional field and understand its scientific frontier development trend;

5. Have preliminary scientific research, scientific and technological development and organizational management capabilities;

6. Have strong self-study ability and innovative consciousness.

Verb (short for verb) immediate plan

20xx~20xx years

Increase English reading and memorizing vocabulary, pass CET-4; Rich computer knowledge, the computer has passed the second level; Take the intermediate certificate and the proE certificate of CAD drawing. Join the party organization.

Master basic vocational skills

Familiar with the existing products (or parts) in the workshop.

Practice part mapping

Consider the parts you observe (structure, roughness, shape and position tolerance, modulus selection, etc.). ). Why does everyone else design like this? Can I make an improved design?

Study the assembly relationship between parts, so as to understand the original intention of engineers' design and ask themselves: Can I improve the design?

Medium-term plan of intransitive verbs

20xx~20xx years

After graduation, you can find a job to develop your own professional type. Salary standard 1800 yuan | The first year is mainly about study. In the second year, I studied and accumulated experience to get the title of mechanical engineer. Do a good job in interpersonal relationships, adapt to the working environment, and strengthen yourself in skills.

Learn from others' experience. Practice more.

Further improve skills and accumulate experience.

Seven, three-year plan

20xx~20xx can become excellent design talents in this major. Learn more knowledge and get an advanced certificate. Accumulate more experience, innovate more and think more.

Career planning book of mechanical industry 5 I. Preface

A good plan is the beginning of success. As the old saying goes, everything is established in advance, and if it is not planned, it will be abolished. So I understand that a successful career can make a perfect life.

Second, self-analysis and evaluation

1. Self-evaluation-confidence and strength

I set myself different career goals at different times. In order to achieve these career goals, I will make unremitting efforts. My confidence and strength are the greatest guarantee for me to achieve these goals.

2. Career interests-photography, painting.

I have strong independent thinking ability and spatial imagination ability. I like exploring new things, enjoying nature and drawing nature with my own pen.

3. Professional Personality-Dare to innovate and persevere.

I am a person who is good at discovering and exploring new things. I am good at communicating with people, dare to innovate, dare to explore, and always persevere!

4. Professional values-comprehensive choice

The results of my talent quality evaluation report show that my top three professional values are pursuing relationship (8 points), pursuing achievement (7 points) and supporting satisfaction (5 points). My specific views are as follows: first, we should have a good relationship with colleagues and leaders after work, and then we should pursue our own labor results and help others appropriately while doing our job well. I also need the support of others in my work!

Step 5: Ability

Advantage ability:

Dare to innovate; Perseverance; Have a positive attitude; Have confidence in yourself; Self-motivated;

Low ability:

There is no logic in doing things; Can't organize their own files well; A little lazy; No good language skills;

Third, the occupation analysis

1. Family environment analysis

Our home is in the countryside, and our parents work in private enterprises. Our family's economic situation is average. In rural areas, what people like to compare with others is family situation and children's employment situation. People have great expectations of me.

2. Analysis of school environment

My school is Nantong Agricultural College, which is a comprehensive full-time ordinary college with distinctive professional characteristics and unique school-running concept. The school has complete teaching facilities, strong teachers and constantly improved teaching quality. In a word, our school ranks among the top universities in the same level.

3. Career analysis

Mechanical manufacturing and automation is a very popular major at present, and we have few talents in this field. The present society is a mechanized society developed by machines, so we have a good job in this field.

4. Social environment analysis

At present, the domestic employment situation tends to be saturated, but I think more talents are needed in mechanical design and mechanical drawing, and the professional market requires higher skills and technology for skilled talents. At the same time, there are more and more talents facing this field.

5. Occupational environment analysis

With the development of China, the demand for industrial products is increasing, and the demand for skilled talents in this field is also increasing. I think as long as you master a skill, you can find a good job in the mechanical industry.

I grew up in a relatively developed coastal city in China. The employment situation in coastal cities is good and the demand for talents is large. But the demand for talents is also very high.

Career analysis summary:

I think the surrounding area has given me a good employment environment, but that doesn't mean I don't need a sense of crisis. Only by better enriching ourselves can we gain corresponding advantages in employment.

Fourth, career orientation.

Based on the above two parts: self-analysis and career analysis, I draw the swot analysis of my career orientation as follows.

Internal environmental factors, advantages and disadvantages

Serious and responsible, careful and patient. I don't have good language skills.

External environmental factors, opportunity factors (O) and threat factors (T)

;