How much do you know about the installation method of three sliding doors in shower room? Master teaches you 5 practical steps!

If you know something about the shower room, the sliding door can be a double sliding door or a triple sliding door when installing the shower room. However, compared with the double sliding door, everyone still knows little about the installation method of the three sliding doors in the shower room, which may also be the reason for the low utilization rate. Today, Bian Xiao focuses on three installation methods of sliding doors in shower rooms, hoping to help you!

The importance of sliding doors is self-evident, and the installation needs to be careful. After debugging, the sliding door must be pushed and pulled smoothly and closed without separation. The specific installation methods of the three sliding doors in the shower room are as follows:

1, wheels for installing sliding doors Generally, holes for installing wheels have been reserved on the glass of sliding doors. Sliding doors need pulleys to move. First, you need to install two wheels above the upper sliding door. After installing the wheel, put it in the corresponding position, and then debug and install the lower wheel.

2, fixed sliding door After the sliding door is placed, it needs to be fixed. Fixing doesn't mean you can't move at all, but you don't let it leave the frame. The fixing method is still the same. Fasten the connector with pliers and screwdriver.

3. Debugging the sliding door After the sliding door is installed, you must not miss the debugging link. Try to see if the sliding door switch is smooth and there is no gap when it is closed. If there is a gap, you need to take measures to debug.

4. Installing the handle of the sliding door The sliding door also needs to install the handle, which is relatively simple to install. First separate the handle, then aim at the hole in the glass and fix it with screws.

5. After the shower room with glass glue at the gap is basically installed, it needs to be waterproof. Using glass glue sticks and coating glass glue on aluminum frames and walls can effectively prevent water seepage in the future.