Summary of work of concrete mixing station tester

Chapter 1: Overview of the work plan of concrete mixing station laboratory.

According to the company's development plan and business ideas for next year, the technical department has formulated a working policy of stabilizing existing achievements and expanding higher goals. It is planned that in the next year's work, we should not only maintain the stability of the current work, but also update our concepts, adjust our thinking and broaden our horizons under the new situation and environment to meet the needs of the company's macro development. On how to accomplish higher-level objectives and tasks in a more severe economic environment in the coming year, our department puts forward the following opinions:

I. Internal management of the department

Quality and cost are two eternal themes, and quality is the most important thing before cost. Quality is made, depending on the sense of responsibility of the executives. Strengthening quality management is actually strengthening personnel management. Only by putting the responsibility on people can we have a traceability mechanism and produce good product quality. On the other hand, if you can't tell the quality problem, it is also a good way to save costs. To sum up the implementation of personnel responsibility in our department before, it is true that some of them were not well implemented and ate the same pot. Although some methods such as employee performance appraisal were also carried out during this period, the results were not great. The reason is that performance appraisal, like casting a net, is not targeted and is not suitable for front-line employees like our department. For example, there are two people in a class, and two people are responsible for the day's work. There is no priority. If something goes wrong and two people share the responsibility, then the threat of the assessment system is not great; No sense of personal crisis; There will be unclear responsibilities, and many things will be reflected to the head of the department for handling; A situation that leads to a decrease in work efficiency. In order to avoid this phenomenon, I think it is necessary to raise the responsibility level of one of the two posts on duty every day. Of course, there is also a big gap in wages and benefits. Be attractive and the salary should be commensurate with your responsibilities. Everyone is proud of being in this position, and there are also uncertain people in this position. For the competent person in this position, the main assessment basis is whether he has had quality problems during this position, the number and size of problems, and the evaluation of various ministries and commissions during this position. In this way, the responsibility will be more clear, and it also reflects the salary principle that the greater the ability, the greater the responsibility and the higher the treatment. This is more suitable for the reality of our room than the simple performance appraisal and the last elimination system, and it can also cultivate reserve talents.

Department personnel are the cells that constitute the benign development of the company. It is necessary to mobilize everyone's enthusiasm for work, but not excessively mobilize the struggle of internal personnel, in order to do a good job in management. Next year, the company's business model will be adjusted, and its main business will be external and managed directly. All these will make the internal management structure of the department need to be adjusted more, and the functions will be decentralized, so as to do a better job in management.

Second, cost control.

The cost of raw materials accounts for more than 80% of the total cost. If the material (quality and price) fluctuates greatly, the impact on our final product will be as great as the butterfly effect. Due to environmental factors, the quality and quantity of raw materials can't fully meet our requirements this year. As the technical department of our production enterprise, we must reduce the cost on the premise of ensuring the quality. It is irresponsible to reduce costs without ensuring quality, so this year's cost is too high to ensure quality. On the other hand, at present, our technology research and development has also encountered bottlenecks. The confusion of talents in Jiang Lang not only puzzles us, but also puzzles the technical departments of many mixing stations. When using the same materials, cost control should not be prominent. We are on the same side when there is no leading technology superior to other mixing stations. What competition can there be without taking shortcuts? I don't think quality problems are indirect cost savings. Enterprises should reserve at least one yuan for quality treatment when producing concrete. For example, we should reserve 300,000 cubic meters of output every year. If there is no quality problem, this 300 thousand is the cost we reduced. Of course, this is a bit of a self-styled idea. In the face of the grim market environment of ground materials in the coming year, I think we should not deliberately pursue some new materials or practices that have not been promoted in the outside market, but should mainly base ourselves on the current market and make good use of materials that have only been contacted this year, such as stone powder, dry sand mining, mountain sand and so on. After finding out the characteristics of materials and putting forward improvement requirements to suppliers, according to the accumulated experience in this year, the goal of product cost reduction 10% can be basically achieved in the case of 5% reduction in raw material prices in the coming year. It can be said that using good materials can greatly reduce the cost.

Third, take over the escrow project.

For the project to be taken over, it is best to implement the previous webmaster responsibility system, or the departments are in charge. We can't jump to conclusions yet, but we should also see that the mortar station has completed about 70 thousand cubic meters this year. Although there have been some problems, the overall objectives and tasks have been completed and are developing in a good direction. So we should also see the advantages of the webmaster responsibility system. If this model is broken, whether there will be problems such as lagging management, increasing difficulty, shifting responsibility to the Committee, and untimely communication and coordination between departments due to scattered production sites and lack of direct on-site management personnel, all deserve our deep consideration.

Bringing the trust project into the direct management of the company will be another key and difficult point for our technical department next year. The reason is that at present, the production personnel of the escrow project are all in place and fully equipped, but the technicians are not equipped. Other production work is physical control, and problems can be exposed immediately when found, and the reasons can be found and solved in time; But quality is intangible control, and problems often appear after many days of product use, such as

Technicians are not responsible enough, and their skills are not very good, which will bring many hidden dangers. In view of the direct management next year, I think we can implement the working mode of technician and machinist, operate the mixing system on the basis of technology to effectively control the quality, and the personnel will be managed by the technical department. If you can't choose the right person, recruit professional technical mortar technicians and implement the responsibility system of different professions.

These are my thoughts on next year's work. In fact, it is not easy to plan a year's work, which goes far beyond the above simple contents, but is limited to writing and cannot be explained one by one. Looking back on the quality management work in the past four years, we feel that people who do quality have great responsibilities and great pressure. For the future work, I want to sum up "prepare for danger in times of peace, prepare for a rainy day" in two sentences. Born in sorrow, died in happiness.

The second part: summary of the work of the laboratory testers in the mixing station.

A year has passed unconsciously in the busy work, which is meaningful, valuable and rewarding. Looking back on this year's work, as an employee of the laboratory of No.8 Component Factory, I deeply feel that quality is the first factor in production and the importance of my own work.

In the past year, under the careful care and guidance of leaders and colleagues, through our unremitting efforts, we have made some achievements in our work, but we still need constant efforts and progress. Looking back on the past year, the work is summarized as follows:

First, I have always been strict with myself ideologically, being sincere, being upright and being practical. Actively participate in all kinds of cultural and sports activities and public welfare activities organized by the department, unite with comrades, actively contribute, love their posts and work hard, have a strong sense of professionalism and responsibility, have a strong sense of collective honor and pride, and actively listen to the opinions and suggestions of colleagues and the criticism and education of leaders.

Two, in practical work, conscientiously implement the national standards, quality management system, product quality supervision and inspection and research and development policies; Really implement the relevant standards, testing methods and regulations of engineering products that this position is responsible for supervising and testing, and ensure that every test has laws to follow. In the test, we should respect facts, stick to principles and never cheat. Always adhere to the rigorous and pragmatic work style, down-to-earth work spirit, obey the arrangement, be serious and responsible, be realistic and pragmatic, be proactive in everything, face difficulties, strive to be a pioneer, and be not afraid of hardship and fatigue. Successfully complete the tasks assigned by the factory and strive to establish a positive image of workers.

I insist on learning as an important way of self-improvement. I not only actively participate in various studies organized by units and departments, but also conduct extensive self-study. Learn the relevant standards, test methods and relevant regulations of engineering products under supervision and inspection. Learning pays attention to both methods and practical results. Skills training to obtain certificates related to chemistry, aggregate and cement.

4. The work I am engaged in is mainly the inspection of compressive strength of concrete specimens: the experimental inspection of raw materials such as cement, sand and stone; Establish a chemical laboratory and carry out related experiments; Participate in concrete mix proportion test.

After I entered the factory, the first thing I came into contact with was the strength detection of concrete test blocks. It seems simple and tedious, but it's not that simple. For example, the qualification is relative to an inspection lot, not just the strength representative value of each group of test blocks. Specifically, you need to judge according to the concrete strength evaluation standard. If the concrete strength fails to meet the requirements, it is likely to lead to landslide accidents. Since then, I know the importance of every job, so I can't be vague when testing other materials that I came into contact with later.

Then I volunteered to take charge of the expansion project of the chemistry laboratory. First of all, the layout planning and procedures of the laboratory. We set up our own chemistry laboratory by reading the materials, combining the professional knowledge of the university and cooperating with our colleagues, and then began to buy experimental equipment, drugs needed for the experiment and related glassware. In this process, every item will be strictly checked and checked repeatedly, and only when there is no problem can it be used in the experiment. After everything was ready, the experiment began. In the course of the experiment, we constantly encountered difficulties, constantly overcame them and moved on, and finally successfully completed the expansion task of the project. There are many dangerous drugs (concentrated hydrochloric acid, nitric acid) in the whole experiment, so I ensured the smooth progress of the experiment with skillful operation skills and serious experimental attitude.

Slowly, I began to contact more experimental projects. I am responsible for the quality control of cement, sand and stone. I will carefully check every batch of raw materials that enter the site and take samples before allowing them to enter the site. For cement, when using bulk cement warehouse, it is forbidden to mix cement of different manufacturers, varieties and labels. When using bagged cement, protective measures should be taken to prevent cement from caking due to moisture. When using cement stored for more than three months, contact the laboratory in advance to conduct a second review of the actual label of cement. For sand, the particle size distribution and fineness should be strictly controlled, and a large number of shells and pebbles should never be mixed. Mud content and stone powder content of pebbles should be strictly controlled. Stone with excessive mud content and stone powder content must be washed and dried before use. Cement, sand, stone, etc. After accepting the entrustment, the laboratory shall issue a test report within 24 hours. All materials to be tested must be certified by the laboratory before they can be used. The principle of inspection before use, otherwise it will be regarded as unqualified products and prohibited from being used in engineering.

Later, I came into contact with the preparation of the mixture ratio report. Due to the large number of construction sites supplied by our factory, the preparation of mixture ratio is quite complicated. The main reason is that different construction projects have different requirements for concrete, and the engineering parts have different requirements for concrete, and the production of concrete also needs to consider climate factors, so it is very troublesome to make a mixture ratio report. But the more difficult it is, the more challenging it is. After constant mistakes and changes, they can finally adapt to this job well.

When you just join the work, you must quickly integrate into the work, constantly demand yourself and constantly urge yourself to improve. As a young worker, I dare not neglect my work at all. I ask myself to write down the gains and losses in my work and the problems that appear every time, so as to learn lessons. When I encounter problems or difficulties in my work, I will consult my colleagues and leaders, listen to their opinions and suggestions patiently and improve my work.

6. Summary: I have been in the company for more than a year. The leaders and colleagues around me are excellent, and I feel some pressure. It is said that there is pressure to have motivation. This made me realize that I have made some small achievements this year, which are far from enough compared with the trust and expectation of the company and superior leaders. So I will work harder and keep exploring. Exploring and innovating is our young people's duty and the only way to develop. I will conform to the historical responsibility entrusted by the times, make a good work plan, participate in skills training, be brave in applying new skills in product quality work, and constantly make it more scientific and standardized, and strive to find something valuable in the field of work.

Part III: Responsibilities of concrete mixing station testers.

Time flies, time flies, and in a blink of an eye, 20 18 is the end of another year. 20 18 is my fourth year in the head office and my first year in the commercial concrete branch. After three years of work in the testing center, I have ushered in a brand-new year on 20 18.

20 18 entered the commercial concrete branch from the testing center for work. After I entered the commercial concrete branch, I first worked as a quality inspector in the quality inspection department to conduct quality inspection. After three months, it will be transferred to the commercial concrete laboratory to carry out the test and inspection of commercial concrete, distribute it outside the law, and handle the certificate of commercial concrete. After I entered the commercial concrete branch, I also encountered many difficulties and made mistakes in my work. However, with the correct leadership and strong support of the company leaders and the enthusiastic help of colleagues around me, I overcame difficulties, corrected my mistakes, stepped into the right job, became familiar with the work at hand step by step, shouldered my responsibilities step by step, and completed my own job.

In the first three months after I entered the commercial concrete branch, I first worked as a quality inspector in the quality inspection department. Through these three months' work, I gradually became familiar with the production, inspection and transportation of concrete from a state of little knowledge about concrete production. In the process of following the car into the construction site, I gradually learned about the working process of concrete after entering the construction site, and my colleagues gradually learned about the causes of common concrete quality defects. Through a period of study, through

I worked in the quality inspection department for three months, which laid a good knowledge foundation for my later work in the commercial concrete branch.

After working in the quality inspection department for three months, I transferred to the laboratory and engaged in the test and detection of commercial concrete. Although I worked in the test and testing center for three years before, it was very difficult for me to start my work in the early days of my work in the commercial concrete branch because I seldom came into contact with cement concrete tests and I didn't engage in cement and cement concrete tests for a long time. I failed to pass the examiner's exam held by the quality inspection station, which made me have some doubts about my working ability. However, with the timely communication of leaders and the care and help of colleagues, I rekindled my enthusiasm for work, worked hard in the subsequent work, and at the same time accumulated knowledge and studied hard, improving my professional knowledge and practical ability. In my laboratory work, I have tested cement raw materials, admixture raw materials, sandstone raw materials and admixture raw materials. At the same time, I also carried out the test of mixture ratio design of BTC functional additive, polycarboxylic acid high performance water reducer and steel slag concrete.

Through the work of 20 18, I realized my lack of working knowledge and practical ability. In the work of 20 13, I need to make up for these two aspects, strengthen my learning ability, improve my knowledge reserve, and strengthen the research and development of new materials and technologies. At the same time, strengthen communication with colleagues and brother departments, seize the opportunity to communicate more, ask more questions and communicate more, and improve the universality of their knowledge reserves.

Time will never stop. In a limited time, only by fully mobilizing the individual's subjective initiative, strengthening their own quality and improving their personal ability can we better adapt to the society.

And the company's development, contribute personal strength, make progress together with the company, create brilliance with the company, and let individuals and companies achieve a win-win situation of rapid development!

Chapter IV: Annual Work Summary of Testers

Leaders:

I am a newly graduated student. I have been working for almost two years in a blink of an eye, and I have successfully completed all the work with the help of my master. From being ignorant of the experiment to being able to complete the experiment independently, my master's teaching and help are indispensable.

No matter what kind of work you are engaged in, you should recognize your job responsibilities, know what you need to do, and then how to do it. As a civil engineer, I think time is very important for engineers. According to an example, standard concrete test blocks will be sent for inspection after 28 days. If there is a weekend, you can add two days, but if it exceeds 30 days, then I'm sorry, and the report is invalid. Another example is electroslag pressure welding and flash butt welding of steel bars. If the inspection is not timely, it shall be submitted for inspection after mold sealing or concrete pouring. If it is unqualified, the consequences will be very serious. Therefore, as an experimenter, it must be submitted for inspection on time. Get the report. At the same time, as a civil engineer, we should sample and submit all kinds of information on time.

The work of the past year is summarized as follows:

I love my job at work, abide by the management regulations of the project department and obey the work arrangement of the leader. Seriously study professional technology, have a correct working attitude, be serious and responsible, take pains to ask the master and leaders, learn from colleagues, explore the practice by yourself in a short time, and master various testing methods and steps skillfully. Fill in all kinds of test accounts and technical data accounts carefully, and submit test data to the construction site in time.

In the past year, I love my job. I can treat every job correctly and seriously. I can seriously abide by labor discipline, ensure attendance on time, make effective use of working time and supervise my post. I need to work overtime on time to ensure that the work can be completed on time.

I start from doing my job and daily work well, from me, from now on, from the little things around me, and persevere. I will do my best and make unremitting efforts in my work. I will constantly improve my job skills, strive to master my job knowledge, and do my work in a down-to-earth manner.

Make a personal work plan before the start of work, give priority to finish all the work in time, achieve the expected effect, complete the work with good quality and quantity, and have high work efficiency. At the same time, I also learned a lot at work and exercised myself. Through unremitting efforts, my work level has made some progress.

Although some progress has been made, there are still many shortcomings in some aspects, and some work is not perfect enough, which needs to be improved and improved in the future work.

In my future work, I will seriously study various rules and regulations and obey the arrangement of the leaders. Try to be the best.

Finally, I want to say that now we should not be afraid of making mistakes, but do it boldly. If you make mistakes, you should sum up and correct them in time, accumulate more experience and strive for early maturity.