Where can I learn garment cutting and garment printing in Wuhan? Is there a future for cutting?

Isn't there a tailor training class in the local area? Might as well go to a basic class. It's easier to learn the basics first and then teach yourself. If there is no tailor training class, go to the sewing shop and ask if they accept apprentices. You can pay their tuition. You should be sharp-eyed but careful, see more and learn more. If you want to teach yourself sectioning, I personally think you should learn math and geometry well, so that you won't find it difficult to understand when you draw sectioning. If you learn the prototype cutting method at first, it may be difficult, because you don't know much about clothing and human body, and you won't understand why. I suggest you learn the traditional formula to draw a hole and find a book called "Introduction to Clothing Cutting and Sewing". Generally, the books on clothing cutting published by Jindun Publishing House and China Textile Publishing House are better, so you can wait until you are proficient in the basics. Don't learn that mother method without a foundation. Of course, if you want to learn to cut, drawing a pattern is the first step, and the second step is doing it, so you have to learn to use a sewing machine. Only you can practice more. You have to take apart the old clothes at home and sew them back on. Of course, you should carefully observe how others sew before opening it, otherwise you will not be able to achieve the purpose of practice if you forget what it looks like after opening it. The purpose of doing this is to learn sewing skills. When you can take the old clothes apart and sew them back together, you can boldly pull some new cloth and draw and cut them yourself. Of course, you usually learn to make pants first. It's simple. If not, refer to how your clothes and pants are made. That's how I learned it anyway. You buy clothes scissors of size 12, which are too heavy and too light for beginners. Personally, I think the prototype clothing teaching material of the Ministry of Education of Japan is very good and comprehensive. With the cutting foundation, you can get a set of teaching materials. I believe if you study hard, you can learn it well. You can also find videos about clothing cutting or buy CDs online, so that you can follow in the footsteps of others, just like a teacher teaches you. Wish you success! Please go to Taobao: Stereo Cutting Course, and you can see it. Very cheap, 1-2 yuan can buy video tutorials. Do you have a flatbed? If you have, you can also learn sewing, or you can buy sewing lessons online. Learning to be a tailor is complicated. I studied fashion design for six or seven years. First of all, learn to play the board. If you haven't studied fashion before, you can go to the bookstore to buy some books about playing board. You may not know much about it, but you need to study it again and again. The most basic method should be proportional distribution, and then we can learn the prototype, so that we can understand what the prototype is. Otherwise, you will be confused, and you should know something about three-dimensional cutting. If it's simpler, have you ever seen clothes in Shanghai? Every issue is always accompanied by a booklet on learning to cut, which contains simple printing methods. You can go and have a look.