Tips for measuring wooden doors Precautions for measuring wooden doors

Before installing the wooden door, the merchant will send a senior wooden door surveyor to accurately measure the customer's door opening in order to make the correct wooden door. When measuring door openings, there are some peripheral factors that should be considered. Otherwise, you will encounter a lot of trouble during the installation process. As consumers, we must know in advance that doing our homework will definitely help the smooth installation of wooden doors. Below, we will bring you a complete introduction to wooden door measurement. Let’s find out together.

Preparation before measuring the wooden door:

Before measuring the wooden door, we need to level the ground and confirm the thickness of the floor.

When we first entered the house we were given, we both felt the ground was uneven. After the cement is leveled, there may be a difference of several centimeters before it is leveled! If the level is not level, the error in measuring the wooden door will be very large, and even the door will not be installed correctly! The floor or tiles do not have to wait for the paving to be completed. Measure, as long as you confirm the thickness before telling the surveyor!

Since the installation of the wooden door has gone through the traditional carpentry era, it is filled with styrofoam to make the door cover more firmly connected to the wall, and the wall The thickness is also very strict, especially for kitchens and bathrooms. Brick placement, as the wall must be leveled before the wall tiles, resulting in unpredictable thicknesses. Therefore, we must lay the wall tiles and then measure the wooden door, so the size is more accurate!

Notes when measuring wooden doors:

Wooden doors are fixed products, and the door hole dimensions are required to be as accurate as possible. In order to reduce consumer subscription costs, conventional brands classify hole width, height, and wall thickness into standard combined sizes. Therefore, the construction site needs to cooperate and pay attention to the following points:

1. The door is required to complete the verticality of the wall And without tilting, the thickness of the left and right walls should be the same and on the vertical end face, otherwise the door may not be installed correctly or there may be gaps between the line and the wall and uneven sizes.

2. The surveyor will put forward corresponding rectification requirements based on the actual measured hole size. Please confirm the production and installation dimensions of the product, and then the customer will perform rectification and construction. Different series of doors have different structural dimensions. When laying on the ground, pay attention to the boundary positions of different materials (floor and floor, floor and masonry position). Avoid having two different materials on the floor where the door leaf falls.

3. If the thickness of the customer's blank wall is , and the measured width or height does not match the traditional standard size (in the case of wooden doors without heightening and widening), the customer's construction team needs Construct entry to wooden door before installation. Masonry remodeling such as adding/cutting siding, lift door openings, etc. Avoid custom-made finished doors that cannot be installed smoothly.

4. If there is a height difference between the hall and the kitchen and the floor, the size of the floor should be determined by the surveyor during the measurement process and marked on the measurement page to prevent errors during the installation process. . It is emphasized here that the horizontal height of the decoration is the only reference standard for the size of the ground and the actual height of the hole. Therefore, the horizontal lines of the trim must be clearly and accurately marked when measuring.

5. There needs to be an installation gap of 10-25mm between the wooden door panel and the hole installation end.

The above is the guide on measuring wooden doors brought to you by us. Thank you for reading.