Safety inspection self-inspection report

Safety inspection self-inspection report (select 6 articles)

The unforgettable work life is over. Looking back on the past work, there are both surprises and shortcomings. Let's write a self-inspection report for the work in this period. I believe everyone is worried about writing a self-inspection report again! The following are the safety inspection self-inspection reports (selected 6 articles) collected by me for reference only. Welcome to read them.

Safety inspection report 1 In order to implement the school safety inspection and ensure the safety of all departments, teachers and students in our department. After the spirit of the school safety meeting on September 25, the road and bridge safety leading group earnestly implemented the spirit of the meeting and conducted a comprehensive safety inspection. The specific work is as follows:

1.Hold a safety meeting for all laboratory personnel at 9: 30am on September 26th, from the perspective of equipment safety. The unsafe hidden dangers in all aspects of equipment storage safety and experimental material use safety are discussed item by item. On this basis, the responsibility is put to people, and the laboratory is required to organize a safety inspection before the festival.

2. On the afternoon of September 26th, a meeting of all experimenters was held to comprehensively arrange the unsafe problems of students and implement the requirements of the school. The main contents are: personal safety, anti-theft safety, fire and electricity prevention safety, and injury prevention safety during the long vacation.

3. On the afternoon of September 20th, organize counselors to conduct safety inspection in student dormitories.

4. On the evening of September 26th, a leadership meeting for all freshmen in charge of safety will be held to educate students in all aspects of safety knowledge and put forward strict requirements for safety during the long vacation.

5. According to the investigation, the safety leading group of this department believes that the existing safety problems are as follows:

1. There are students on the north and south floors of the experimental teaching area where the Road and Bridge Department is located every day, but the doors on the two floors are relatively narrow, which will easily hinder evacuation in case of major danger.

Students in our department often go to the school auditorium for meetings. After investigation, the security doors on both sides of the auditorium are often blocked and there are problems, which may not be conducive to students' escape.

3. There are reagents that have not been used for many years in the department laboratory, which have been reported to the school for scrapping for many years and have not been solved so far. This matter should be dealt with as soon as possible to avoid trouble.

4. The electricity in the paved classroom of the laboratory is exposed and there are hidden dangers.

Self-inspection report of safety inspection 2 is to thoroughly implement the spirit of the instructions of the Housing and Urban-Rural Development Department of Jilin Province on further strengthening the safety production of urban municipal utilities and construction, profoundly learn from accidents, implement safety responsibilities, strengthen preventive measures, earnestly do a good job in the company's safety production, and effectively prevent and resolutely curb accidents. According to the requirements of the Emergency Notice on Further Strengthening the Work of Urban Municipal Utilities and Building Safety, the company's safety committee will check the implementation of safety responsibilities and systems, safety publicity and education training, safety responsibilities implementation and hidden dangers rectification, and emergency plan formulation and drills. The specific contents of the self-examination are as follows:

I. Implementation of safety system and responsibilities

The company's safety production management system is completely filed, all systems are sound, the emergency plan is complete, the drill is feasible, the assessment effect of various operating procedures is good, and cadres and workers at all levels consciously abide by the contents of the systems and procedures, and there is no violation.

Each project department and the production line team leader sign the team leader's responsibility letter for safety production. The team leader has a strong sense of safety in production, conscientiously implements the idea of "everyone is responsible for safety in production", and employees earnestly perform their respective safety responsibilities in their posts, which provides a strong guarantee for the implementation of various safety measures.

Two. Safety education and training

According to the overall arrangement of the superior leaders, the company organized various forms of missionary activities. First, through the convening of safety production meetings and other forms, in-depth legal education, publicity and study of the "Safety Production Law" and other laws and regulations. The second is to enrich the forms of publicity activities, organize employees to carry out safety knowledge education, and publicize various safety knowledge and safety laws and regulations by using billboards, banners and slogans. So that the majority of employees have a profound understanding of safety, safety has a wide range of concerns, greatly improving the safety awareness of all employees.

Through various forms (warning signs, billboards, slogans, etc. ), clear the hazards and preventive measures existing in the employee's post, and clear the rescue measures when the hazards occur. Train employees to master the emergency handling skills of small industrial injuries and keep the injuries to a minimum. Enable employees to skillfully use labor health protection articles, reduce occupational hazards and prevent the occurrence of occupational diseases. So that employees can correctly and skillfully take self-help and mutual rescue measures in sudden accidents. * * * The company organized safety production knowledge training for many times, held safety production meetings frequently, summed up the hidden dangers existing in safety production work, formulated rectification and preventive measures for the existing safety hazards, exchanged safety work experience, conveyed safety production documents, arranged relevant safety work, and notified the safety inspection.

Three, the construction site "three types of personnel" and special operations personnel with valid certificates, so that people and certificates are consistent, tower cranes, construction elevators and other mechanical equipment have passed the re-inspection.

Fourth, the implementation of safety responsibilities and hidden dangers rectification

Maintenance records of equipment, safety protection devices, feeding platforms, guardrails, scaffolding and other protective facilities are complete and effective. All kinds of fire safety facilities are complete, qualified and effective, and the operators are required to wear labor protection articles.

The installation and maintenance of electrical equipment should be operated by electricians. Non-electricians are not allowed to decorate electrical equipment and lines. Accident-prone electrical equipment should be managed by special personnel, and the responsibility should be implemented to people. Electricians can be equipped with labor protection articles according to regulations, operate according to operating procedures, and regularly check the lines and all electrical equipment. All high-pressure dangerous places are equipped with protective facilities and warning signs. Non-electrician operators are strictly prohibited from entering the guardrail of the distribution room or electrical equipment, pulling and hanging it privately, and approaching high-voltage dangerous places.

According to the requirements, the team members of the safety production Committee carried out several major inspections of safety production in stages. All kinds of hidden dangers were rectified, and the hidden dangers of accidents were really eliminated. Conduct a self-inspection once a month. In the inspection process, adhere to the principle of "safety first, prevention first, comprehensive treatment", conduct a comprehensive investigation of weak links and possible problems, and focus on checking whether the safety system is implemented, whether safety measures are in place, whether safety protection facilities and equipment are complete and intact, and whether loopholes and hidden dangers are rectified.

Five, the formulation and exercise of emergency plan

In order to prevent accidents, the team of the Company's Safety Production Committee has studied the emergency plans of employees in this department for many times. On this basis, according to the particularity of our production, emergency safety drills and fire drills are simulated. During the drill, the ability of employees to deal with emergencies, the investigation and handling of emergencies and the self-protection measures of personnel were emphatically investigated. Through on-site emergency plan drills, the safety awareness of employees and managers will be improved, so that employees can clearly understand the importance of safe production, enhance their ability to respond to emergencies, gradually improve and perfect emergency rescue plans, and improve emergency handling and on-site rescue skills.

Six, found that there are individual security risks in the inspection, the company ordered the project department to rectify immediately.

Safety inspection self-inspection report 3 I. Overall situation

1. The machine room is located on the building floor, with an area of square meters and a floor load of KN/ m2.

2. Initial completion time of the overall computer room

3. Last upgrade time. Among them, the UPS host is UPS battery month, precision air conditioning is July 20xx, and the environmental monitoring system is July 20xx.

Second, the equipment parameters

1, and the number of mains supply loops is * * *, among which the first, first and first KVA.

2. There are backup power supply measures.

3.UPS host * * * The first KVA, the first KVA and the first KVA run independently.

4. The standby time of 4.UPS battery is designed as AH, * * * blocks.

5. The computer room has precision air conditioning. If yes, there are * * * units, including the first kilowatt, the first kilowatt, the first kilowatt, the first kilowatt and the first kilowatt. (To be continued)

6, no gas fire extinguishing system. Start-up mode: the expiration date of automatic annual inspection is 20XX 65438+February.

seven

8, there are effective lightning protection measures.

Third, the equipment warranty

As of the filling date, the warranty expiration date and level of the equipment:

1, air conditioner, warranty expiration date, third party, response level 0 hours.

2.UPS, warranty expiration date, third party, response level 5 hours to arrive at the scene.

3. Power supply and distribution, warranty expiration date, and the time when the response level arrives at the site.

Fourth, the equipment operation index

The average load rate of 1 and UPS in the last 2 weeks is.

2. In the last two weeks, the average temperature of air conditioner was 22℃, the humidity was%, and the highest temperature was 24℃.

3. the highest voltage v, the lowest voltage v and the average voltage v of the battery in the last two weeks.

Verb (short for verb) Equipment inspection

1, air conditioning inspection frequency, once a year, the last inspection time is 20XX April 15.

2.UPS inspection frequency, year, month and day.

3. Inspection frequency of fire protection system, times a year, and the last inspection time is March 15, 20XX.

4, battery discharge frequency, times a year, the last discharge time for months.

Sixth, frequently asked questions.

1, is the equipment aging? If so, please specify.

2. Is the cable aging? If so, please explain.

3. Is the cooling capacity of air conditioner insufficient? If yes, please quantify.

4. Whether 4.UPS has insufficient capacity and high load rate, if so, please quantify.

5. Is the subsequent capacity of the battery insufficient? If yes, please quantify.

6. Is there any lack of physical indicators in the computer room? If yes, please explain.

Seven, computer room accident emergency plan and the latest emergency drills.

It can be reported as an attachment.

Eight, the status quo of the computer room and improvement scheme

The overall situation of our company's computer room is average. The main problem is that the distribution frame lines are messy due to frequent adjustments of company departments and offices. Our department will carry out rectification in the near future, and rearrange the wiring of the computer room at weekends or evenings. The finishing time is before August 1 20XX.

Self-inspection report of safety inspection 4 I. Potential safety hazards

(1) The stairs of Yifu Building are flat.

(2) The wires leading to the family area are partially exposed.

Second, the rectification measures

(1) Rectification measures for smooth staircase floor in Yifu Building.

1) Learn the Responsibility Form for Safety Work in Experimental Primary Schools and the Management Regulations for Safety Work in Experimental Primary Schools, and clarify the target responsibilities.

2) Organize specific personnel to be in place.

Every day, the administrative personnel on duty go to the stairs after school in the morning and afternoon to manage safety, keep students downstairs and prohibit parents from going upstairs.

In the last class every morning and afternoon, the class teacher organizes and leads the students of this class to go downstairs in an orderly manner.

After school every day, arrange security guards to be on duty and manage the safety of students on the stairs.

(2) The rectification plan for the exposed part of the line leading to the old family area.

1October 26th and 27th 10. The General Affairs Department has arranged for the water and electricity administrator to replace the new wires.

Safety inspection self-inspection report 5 School safety is related to people's life and property safety and social harmony and stability. It is the top priority of school work. Recently, some school students suffered frequent casualties and had a bad social impact, which revealed that school safety education needs to be further strengthened.

The school earnestly studied the spirit of the Notice of the Education Bureau on Further Improving School Safety Work, carefully analyzed and studied the cause of the accident, learned lessons, closely focused on the theme of building a safe Junan and building a harmonious society, and carried out systematic and regular safety inspections in accordance with the requirements of the Education Bureau to ensure safety work, so as to keep the alarm bells ringing and make unremitting efforts. In order to effectively implement safety work and eliminate potential safety hazards, this self-inspection focuses on the following aspects:

First of all, the school leaders immediately held a safety symposium.

Study and implement the spirit of the Notice of the Education Bureau on Further Improving School Safety. We are determined to further strengthen the safety work, focusing on the big picture, starting with small things, checking room by room, room by room and wall by wall, and rectifying immediately when problems are found, so as to create a good safety environment for education and teaching. The meeting decided:

1, immediately convey the spirit of the Notice to all employees, study documents to promote implementation, and clarify safety.

Full responsibility, according to the items listed in the school's "Safety Checklist for Classrooms and Office Rooms", check one by one to ensure that there are no potential safety hazards in the area where you are responsible.

2. Each class immediately holds a theme class meeting to strengthen the daily safety education for students. The class meeting requires that the content should be substantial, the effect should be remarkable, and it can't be a mere formality, which really plays the role of safety education.

3. Start the safety drill plan. The drill time is1October 29th 165438+9: 00.

Second, strengthen the management of students going up and down stairs.

Accidents of students going up and down stairs often occur, which are directly related to inadequate management, inadequate preventive measures and unfavorable protection and guidance. To this end, the school has taken the following measures:

1. Stairs, handrails and other facilities were overhauled, and the intact rate was 100%. Safety lines are set up on the upper and lower stairs of the teaching building, so that students can see at a glance, and the stairs in the corridor are unblocked, thus putting an end to the crowding phenomenon.

2. The school signed a letter of responsibility for the safety of going up and down stairs with teachers and students, and arranged for teachers to be on duty at the stairs during recess and after school to protect and guide students to evacuate. The teacher on duty requires to arrive at the post in time, clarify the responsibility, and eliminate hidden dangers in the bud.

Third, manage the school road team and strengthen traffic safety.

1, off-campus class activities must be reported in writing to the school, and it is strictly forbidden to go out without permission.

2. Safety warning signs have been set up, and the school road team is escorted by the head teacher and vice principal. Do not take agricultural vehicles, scrapped vehicles and other vehicles that do not meet traffic safety.

Fourth, strengthen the management of electricity consumption and fire protection.

1. Strengthen the management of electricity consumption, standardize the maintenance of power cords, especially the switches, sockets and connectors in the classroom, implement the system of "one key, one pliers", and resolutely put an end to disorderly pulling and connecting.

2. Improve the fire control system, establish and improve the fire control plan, and carry out educational activities with the theme of improving the self-care, self-help, disaster prevention and escape ability of primary and secondary school students. The fire-fighting equipment and its application were inspected, and the fire-fighting equipment was equipped according to the fire-fighting requirements. Check and update the fire hydrants and fire extinguishers in the teaching building, strictly control the fire source, do not allow students to carry kindling with them, and do not close the back door during class to ensure the safe passage is unimpeded.

Five, strengthen campus safety, to prevent highly pathogenic avian influenza.

1, the doorman is on duty 24 hours a day, and people unrelated to the school are not allowed to enter the campus. The registration of foreign personnel shall be carried out, and the number cancellation system shall be implemented to educate students not to associate with people they don't know. Without the signature of the class teacher, students are not allowed to leave the school privately, and it is strictly forbidden for students to bring dangerous goods into the campus.

2. The school has formulated an emergency plan for highly pathogenic avian influenza, carried out publicity and education activities on the prevention knowledge of highly pathogenic avian influenza for students, educated students to develop good personal hygiene habits, avoided close contact with poultry, and resolutely put an end to livestock and poultry and products that have not been quarantined from entering the campus to ensure the health and safety of students' study and living places.

After self-examination, the potential safety hazards have been eliminated, the school education environment has been improved, students' awareness of safety precautions has been further enhanced, and the whole school has formed an organized and institutionalized safety education and teaching atmosphere.

Safety inspection self-inspection report 6- 1. Unify understanding and attach great importance to it.

The main leaders of the school always insist on putting safety work at the top of all the work in the school. Especially after receiving the document, I conveyed the spirit of the document to the teachers, students and parents of the whole school on June 5438+0 18, focusing on several serious traffic accidents in China since June 5438+00. At the same time, I took the opportunity of the parents' meeting to conduct a comprehensive safety education, focusing on traffic safety and winter safety education for students. In strict accordance with the requirements of superiors, the school safety leading group conducted a comprehensive investigation on traffic safety, fire safety, food hygiene safety and dormitory safety in our school, mobilized the teachers and students of the whole school to unify their understanding and attached great importance to school safety.

Second, the safety inspection and rectification summary

Third, the overall situation:

1. After comprehensive inspection, our school buildings have reached the safety standards, the management and use of water and electricity are normal, the management and inspection institutions of canteens, food hygiene, egg and milk projects are sound, and there are clear institutional plans and inspection measures. The health certificates and hygiene licenses of employees in school canteens are complete, the procurement responsibility of raw materials for grain, oil, meat, poultry and seasonings is implemented, and the operation process conforms to the specifications; The management of student dormitory basically meets the requirements, and the standardization and refinement of dormitory management have been greatly improved.

2. Regularization and institutionalization of students' safety education: at the beginning of school, students are given comprehensive safety education by using the opening ceremony; 10, to carry out legal safety education; 1 1 month 18, in view of the recent serious traffic accidents in China, parents' meetings were used to carry out traffic safety and winter safety education.

The main hidden dangers are: first, the traffic safety of students, and students are crowded and seriously overloaded on weekends; Second, the problem of students surfing the internet has long plagued the education and management of students in our school, and parents of students have also strongly reflected it.

In view of the above problems, our school will further improve the management system, strengthen measures, consolidate responsibilities, and ask relevant departments to help solve them to ensure the safety of all students.

;