Those things used by door factory workers

Tools/materials for dusting wooden furniture are as follows:

1. A piece of board with nail holes or a blank wood product with nail holes;

2. A jar of single-component nail hole repair putty (water-based nail hole paste);

3. A scraper (commonly known as a putty knife);

4. For polishing of sandpaper (240).

Steps/methods for filling ash on wooden furniture:

1. Polish the board (use sandpaper to polish the burrs on the nail holes);

2. Clean the nail holes (Use an air compressor air hose to blow off the dust in the nail holes) to avoid affecting the adhesion of the putty;

3. Use a putty knife to take an appropriate amount of putty to fill it (the putty should be stuffed into the nail holes as much as possible) It is not advisable to apply a layer of nail holes);

4. Complete the repair (generally one repair with ordinary gun nails can be completed, and a second repair is required for individual nail holes that have sunken after repair);

5. Clean the dust after sanding (use 240 grit sandpaper to polish the remaining putty around the nail holes).