Job Recruitment Website - Zhaopincom - I am an independent candidate of Tianjin Engineering Normal University. I heard that there are four-year and five-year colleges. Who can tell me their majors and courses?

I am an independent candidate of Tianjin Engineering Normal University. I heard that there are four-year and five-year colleges. Who can tell me their majors and courses?

Tianjin Normal University of Technology in 2008 separate enrollment brochure.

Tianjin Teachers College of Engineering is a full-time college directly under the Ministry of Labor and Social Security. Since March 2000, it has been transformed into a central and local * * * building, with Tianjin as the main management, mainly to train teachers, management cadres and applied senior professionals in secondary and higher vocational and technical education in China. The college has 10 master's programs, 34 undergraduate majors and 8 higher vocational majors. In addition to recruiting high school graduates, the college adopts the methods of independent proposition, examination and admission according to the Interim Provisions of the former State Education Commission on the Enrollment of Graduates from a Few Vocational and Technical Schools (87) No.012 and the document No.41of Tianjin Vocational and Technical Teachers College of the former Ministry of Labor. Students admitted to the separate entrance examination enjoy the same treatment as those admitted to the national college entrance examination.

Warmly welcome outstanding fresh graduates from technical schools who are interested in vocational education and meet the registration requirements to apply for the exam.

First, enrollment majors and objects

1. Mechanical design, manufacturing and automation: undergraduate, with a four-year academic system, enrolling graduates from senior technical schools with advanced or above professional qualification certificates, such as lathe workers, machinists, tool fitters, assembly fitters, milling machines, machining center operators, etc.

2. Material Forming and Control Engineering (mold direction): undergraduate course, with a schooling of five years, enrolling graduates from technical schools with intermediate or above vocational qualification certificates, such as lathe workers, machinists, toolfitters, assembly fitters, milling machines, planers, grinders, machining center operators, etc.

3. Mechanical manufacturing technology education: undergraduate, with a five-year academic system, enrolling graduates from technical schools with intermediate or above vocational qualification certificates, such as lathe workers, machinists, tool fitters, assembly fitters, milling workers, planers, grinders, machining center operators, etc.

4. Mechanical maintenance and testing technology education: undergraduate, with a five-year academic system, enrolling technical school graduates with intermediate or above vocational qualification certificates, such as lathe workers, machinists, tool fitters, assembly fitters, milling machines, maintenance electricians, machining center operators, etc.

5. Automobile maintenance engineering education: undergraduate course, five-year academic system, recruiting technical school graduates with intermediate or above vocational qualification certificates for machinists, tool fitters, assembly fitters, automobile drivers and automobile repair positions.

6. Electrical technology education: undergraduate, with a five-year academic system, enrolling technical school graduates with intermediate or above vocational qualification certificates for maintenance electricians, radio debuggers and home appliance repairers.

7. Applied electronic technology education: undergraduate, with a five-year academic system, enrolling technical school graduates with intermediate or above vocational qualification certificates for maintenance electricians, radio debuggers and home appliance repairers.

8. Computer Science and Technology: Bachelor degree, five-year academic system, unlimited types of work. Recruit technical school graduates with intermediate or above vocational qualification certificates.

9. Numerical Control Technology (National Demonstration Specialty): Higher vocational education, lasting for three years, enrolls technical school graduates with intermediate or above vocational qualification certificates, such as lathe workers, machinists, tool fitters, assembly fitters, milling workers, planers, grinders and machining center operators.

10. Automobile inspection and maintenance technology (national demonstration major): Higher vocational education, with a duration of three years, enrolls technical school graduates with intermediate or above vocational qualification certificates such as mechanical fitter, tool fitter, assembly fitter, automobile driver and automobile repair.

1 1. Mechanical manufacturing and automation: Higher vocational education, lasting for three years, enrolls graduates from technical schools with intermediate or above vocational qualification certificates, such as lathe workers, machinists, tool fitters, assembly fitters, milling workers, planers, grinders, machining center operators, etc.

12. Automotive application technology: Higher vocational education, lasting for three years, enrolls graduates from technical schools who have obtained intermediate or above vocational qualification certificates for machinists, tool fitters, assembly fitters, automobile drivers and auto repair positions.

13. applied electronic technology (Tianjin demonstration major): higher vocational education, with a duration of three years, enrolls technical school graduates with intermediate or above vocational qualification certificates for maintenance electricians, radio debuggers and home appliance repairers.

14. electrical automation technology: higher vocational education, lasting for three years, enrolls technical school graduates with intermediate or above vocational qualification certificates, such as maintenance electricians, radio debuggers, home appliance repairmen, etc.

15. computer application technology: higher vocational education, with a duration of three years, is not limited to types of work, and recruits graduates from technical schools with intermediate or above vocational qualification certificates for the types of work they study.

Enrollment regions: Beijing, Tianjin, Hebei, Shanxi, Inner Mongolia, Liaoning, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Guangxi, Hainan, Yunnan, Shaanxi, Gansu and Ningxia.

Second, the exam.

1. Theoretical course examination subjects and scoring methods

(1) major in mechanical design, manufacturing and automation, material forming and control engineering, mechanical manufacturing technology education, mechanical maintenance and inspection technology education, automobile maintenance engineering education, mechanical manufacturing and automation, numerical control technology, automobile inspection and maintenance technology, automobile application technology, etc.

Theoretical courses: mathematics, physics, Chinese, English, mechanical foundation.

(2) majors such as electrical technology education, applied electronic technology education, electrical automation technology and applied electronic technology:

Theoretical courses: the basics of mathematics, physics, Chinese, English, electrician and electronic technology.

(3) computer science and technology, computer application technology and other majors:

Theoretical courses: mathematics, physics, Chinese, English, computer application foundation.

Full marks in all subjects 150. The objective questions of each subject are answered by the answer sheet. The examination results will be notified to the candidates themselves by the applicants, and the candidates themselves can also check online.

Within three working days from the date of publication of the results, if the candidates have any objection to their scores, they can apply to the local provincial admission registration unit for review of the scores, and the provinces will notify the college admissions office by fax, and the college admissions office will handle it according to the prescribed procedures. The results of the inquiry shall be notified to the candidates themselves by the applicants in this province.

2. Time and place of examination

Theoretical course exam: June 7-9 (see the admission ticket for details).

Operational skill appraisal: before June 10, the labor and social security departments (bureaus) of all provinces (municipalities and autonomous regions) will arrange the assessment.

3. Main reference materials

Chinese is a textbook compiled by national technical schools, China Labor Publishing House, 4th edition.

"Mathematics" and "Physics" are textbooks compiled by national technical schools. China Labor Publishing House, 3rd and 4th editions.

"Mechanical Basis", "Electrical Basis" and "Electronic Technology Basis" are textbooks compiled by national technical schools, China Labor Publishing House, the third edition.

Fundamentals of Computer Culture, edited by Hao Xingwei, Higher Education Press, Second Edition.

Wang Huiran and Xue Wensheng edited Fundamentals of Computer Application Science Press.

C Programming is published by Tan Haoqiang Tsinghua University Publishing House, the second edition.

English is a textbook for junior high school and senior high school.

Third, the application conditions

1. Applicants must meet the following conditions:

(1) Abide by the Constitution and laws of People's Republic of China (PRC);

(2) fresh graduates from technical schools or senior technical schools have the types of jobs and technical levels required for applying for majors;

(3) Good health and good facial features;

(4) Have a formal household registration in the province (municipality directly under the Central Government or autonomous region) where my household registration is located.

2. The following persons shall not apply:

(1) students or graduates from ordinary middle schools, technical secondary schools and vocational middle schools;

(2) Those who have been expelled from ordinary colleges and universities and ordered to drop out of school for less than one year (as of September 20081);

(three) because of the violation of the criminal law, the relevant departments have taken compulsory measures or are serving sentences.

Fourth, registration and voluntary reporting.

The enrollment offices of labor and social security departments (bureaus) of all provinces (municipalities directly under the central government and autonomous regions) are responsible for the registration work, and there are several registration points under them.

1. Registration time: February 20 to March 20, and it will not be processed after the deadline.

2. Registration method: In 2008, computer registration and manual registration were combined. Candidates must go through the registration formalities at the registration point set up by the Labor and Social Security Department (bureau) with their household registration book, ID card, diploma of technical school, six recent one-inch bareheaded half-length color photos and supporting materials required by the Admissions Office of the Labor and Social Security Department (bureau), and fill out the Registration Form for Individual Enrollment of Tianjin Engineering Teachers College in 2008. At the same time, it is explained that candidates with intermediate vocational qualification certificate must provide a copy of vocational qualification certificate to the college admissions office through the Admissions Office of the Labor and Social Security Department (bureau) of this province before June, 2008 10. Holders of advanced vocational qualification certificates (referring to four-year undergraduate candidates) and winners must send the original certificates to the Admissions Office of Tianjin Normal University of Science and Technology before June 10 (subject to the local postmark time). Those who meet the requirements after examination shall be approved by the labor and social security department (bureau) of the province (municipality directly under the central government and autonomous region) to register and issue the admission ticket (see the work flow of individual enrollment registration of Tianjin Engineering Normal University for specific procedures).

3. Volunteering: Candidates fill in their volunteers at the same time as filling in the registration form, which should be carefully filled out by themselves according to the requirements of filling in the form (graduates of senior technical schools with advanced vocational qualification certificates can fill in their undergraduate volunteers in order), and it cannot be changed after filling in.

4. Please refer to the Measures for Independent Enrollment of Free Education Normal Students in Tianjin University of Technology in 2008 (Tianjin Institute of Technology [2008]10) for details on the registration and voluntary reporting of free education normal students in some western provinces (municipalities and autonomous regions).

5. Examination fee for theoretical courses: 150 yuan.

6. Operational skill appraisal fee: charged according to the appraisal fee standard of labor and social security departments (bureaus) of all provinces (municipalities directly under the Central Government and autonomous regions).

Verb (abbreviation of verb) political, ideological and moral assessment

Political, ideological and moral assessment is the responsibility of the candidate's unit, mainly depending on the candidate's own performance. The examinee's unit must seriously and truthfully evaluate the examinee's political attitude, ideological consciousness and moral quality. Candidates' immediate family members (parents or caregivers) or major social relations (those who are directly related to candidates' politics, ideology and economy) have major problems, and supporting materials should be attached.

Six, physical health examination

The examination of candidates' physical health status is strictly in accordance with the Guiding Opinions on Enrollment Physical Examination of Colleges and Universities revised by the Ministry of Education and the Ministry of Health in 2003. Physical examination must be carried out in qualified hospitals at or above the county level designated by the labor and social security departments (bureaus) of provinces (municipalities directly under the central government and autonomous regions), and all candidates must be tested for transaminase and hepatitis B surface antigen. Those who fail the medical examination will not be admitted.

Seven, admission principles and methods

The admission work is organized and implemented by the college under the supervision of the Training and Employment Department of the Ministry of Labor and Social Security, the Tianjin Municipal Education Commission and the Admissions Supervision Office. The principle of comprehensive assessment of morality, intelligence, physique and ability and merit-based admission is implemented for freshmen. On the basis of qualified operation skills, it is carried out in batches according to the mode of undergraduate course first and higher vocational education later.

Batch in advance: Free education for normal students. Only those candidates whose first major voluntarily applies for free education for normal students and whose scores in the separate enrollment examination are within the scope of this kind of separate enrollment plan in this province will be admitted on the basis of the scores in the separate enrollment examination, comprehensive assessment, comprehensive evaluation and merit-based admission.

The first batch: undergraduate (four-year system), according to the wishes of candidates, in different provinces (cities, autonomous regions) from high scores to low scores.

The second batch: undergraduate course (five-year system), which is selected from high scores to low scores by provinces (cities, autonomous regions) and majors according to the wishes of candidates.

The third batch: higher vocational education, which is divided into provinces (cities and autonomous regions) and majors according to the wishes of candidates, from high scores to low scores.

Those who cannot provide the certificate of operation skill level (or certification materials) before June 10 will not be admitted.

Eight. Relevant policies

1. Candidates who have won the title of national technical expert are exempt from the test operation skills, and the total test score is added with 100.

2. The top three candidates in the National Technical School System Skills Competition are exempt from the test operation skills, and their total test score is 80 points; The fourth to tenth candidates are exempt from the test operation skills, and the total score of the test is 50 points.

3. Candidates who won the top three in the provinces (municipalities directly under the Central Government and autonomous regions) young workers' competition and the technical school system skill competition will have their total test scores increased by 30 points.

The above bonus points policy is applicable to candidates who are admitted to the corresponding major of the type of work they have studied. Candidates only enjoy the highest bonus points when adding points, and do not repeat the bonus points.

Students who participated in the national technical school skills competition in 2007, whose original scores in the 2008 college entrance examination were above the local undergraduate admission score, and were admitted to the undergraduate major, can get a one-time reward of 8,000 yuan. After enjoying the bonus policy, if the score reaches the local undergraduate admission score and above and is admitted to the undergraduate major, the college will award 5000 yuan at a time.

Nine, the new entrance examination

Freshmen admitted to the college should go through the admission formalities at the school according to the time specified in the admission notice. Failure to report within 15 days from the date of registration without justifiable reasons shall be deemed as waiver of admission qualification. Within three months after the freshmen enter the school, the college will conduct cultural classes, re-examination of operational skills and physical examination. Candidates who do not meet the requirements or resort to deceit will be dealt with in accordance with the Measures for Handling Violations in National Education Examinations promulgated by the Ministry of Education and the relevant rules and regulations of the College.

Re-examination of skills: Re-examination shall be conducted according to the skill level standard of the corresponding type of work stipulated in the national vocational standards formulated by the Ministry of Labor and Social Security and the vocational qualification certificate level requirements of candidates when they are admitted. Those who fail the skill re-examination will be retained for one year and returned to their original places to make up their skills.

Deal with

Students who have obtained school status enjoy scholarships in accordance with relevant regulations, and students with excellent academic performance can enjoy excellent student scholarships. Employment implements "two-way choice under the guidance of national employment policy".

XI。 expense

According to the relevant regulations of the state, the admitted candidates have to pay tuition and accommodation fees every year.

Twelve, this chapter shall come into force as of the date of promulgation. Tianjin University of Technology Normal University's previous policies and regulations on individual enrollment work that are inconsistent with this brochure shall be abolished, and the provisions of this brochure shall prevail.