Resume of mechanical engineer

Mechanical engineers usually refer to professionals engaged in the mechanical industry. The following are the resumes of mechanical engineers collected by everyone. Welcome to read and learn from it.

Resume of mechanical engineer (1) Last name: XXX.

Gender: female

Date of birth:

Origin: Shanghai

Current city: Shanghai

Working years: more than five years.

Current annual salary: XX million RMB.

Contact telephone number:

Application direction

Work industry: machinery/equipment/heavy industry, environmental protection

Position: mechanical engineer, technical research and development engineer.

Work location: Shanghai

Salary requirements: negotiable

Business experience

2008/0 1? Now * * * company

Industry: machinery/equipment/heavy industry

Mechanical engineer in development office

Main responsibilities:

Responsible for the technical management of dredging machinery of cutter suction dredger, a new product of the company. The work includes the negotiation of the technical agreement of the ship's mechanical equipment suppliers, the drawing design of the ship's dredging equipment, the technical support for on-site production, the management and distribution of drawings and materials, etc. Coordinate all parties and professionals in the project to work together (design institute, shipowner, purchasing and production departments in the company).

2004/09? 2008/0 1: Shanghai port machinery heavy industry co., ltd

Industry: machinery/equipment/heavy industry

Technical Center (National Accreditation) Mechanical Engineer

Main responsibilities:

Independently complete the design of port mechanical structure and machinery. The design content includes structural strength, stiffness and stability analysis and drawing; Design and selection of various transmission mechanisms. At the same time, the boom, gantry and balance system of portal crane are designed and completed. Gantry, front and rear girders of container bridge crane; Structure of telescopic boom and tail car of ship loader and ship unloader, and design of lifting, walking and rotating mechanism. Skillfully design various structures and deal with structural production process problems; Skilled in designing mechanical transmission system. Main design projects:

Steel Structure Design of Gantry of 40t and 60t Shore Container Crane Structural Design of Gantry and Boom System of 25t and 40t Port Portal Crane

Steel structure design of telescopic boom system of 2500t/h ship loader Design of gantry and slewing frame of 4200t/h stacker-reclaimer

Steel structure design of tailstock of 6000t/h ship loader: gantry structure design of 40t and 60t RTG, walking mechanism of port crane, etc.

2003/07? 2004/06: Xuzhou Construction Machinery Co., Ltd.

Industry: machinery/equipment/heavy industry

Metalworking workshop intern

Main responsibilities:

Familiar with the working performance of various turning, milling, boring and grinding machines; Compile simple process cards and design simple fixtures, assist engineers to deal with problems in gearbox production, and assist Italian staff to install and debug CNC machining centers. Familiar with general machining performance and technology, and understand advanced CNC manufacturing technology.

educational training

1999/09? 2003/07: Bachelor of Mechanical Design, Manufacturing and Automation, Wuhan University of Technology.

2004/ 10? 2004/ 1 1: linear static analysis of Antalya Ansys project

2004/09? 2004/10: pro/e software operation of PTC Company

Learn three-dimensional solid modeling, sheet metal design, component assembly, engineering drawing and advanced component design.

Vocational skills

Foreign Language: English: Good.

self-assessment

After several years of workplace training, familiar with the design and manufacture of general construction machinery; Proficient in operating Autocad, Pro/E and other software. Cheerful personality, strong sense of responsibility, willing to accept various challenges.

Resume of mechanical engineer (II) Name: Mr. Zhang

Gender: male

Marital status: unmarried

Ethnic group: Han nationality

Household registration: Inner Mongolia-Hohhot

Age: 26 years old

Current location: Guangdong-Shenzhen

Height: 178cm

Hope areas: Guangdong, Jiangsu, Beijing, Tianjin, Inner Mongolia.

Desired position: mechanical (electrical)/instrumentation-mechanical engineer

Mechanical (Electrical)/Instrumentation-Fixture Engineer

Mold category-mold engineer

Mechanical (Electrical)/Instrumentation-Structural Designer

Mechanical (Electrical)/Instrumentation-Mechanical Design/Manufacturing Engineer

Looking for positions: mechanical design engineer, automation engineer, fixture design engineer

Treatment requirements: negotiable

Earliest arrival: within half a month.

Education experience

2009-09-2011-07 Chongqing University, majoring in mechanical design and automation.

Training experience

2011-04 ~ 2011-04 PTC proe4.0 wiring module is completed.

Work experience: Up to now, 3 years, 1 1 month work experience, once worked in 1 company.

* * * Company name (2007- 1 1 ~ to present)

Nature of company: foreign-funded enterprise

Industry category: machinery manufacturing, mechanical and electrical equipment, heavy industry.

Position: mechanical engineer

Job category: mechanical engineer

Job description:

1, responsible for the design, improvement and technical support of the company's non-standard automation equipment, the design, installation and debugging of the electric control system of common automation equipment, and the assistance of the special department of complex electric control system.

2. Using Pro/E to design fixtures on manual and automatic assembly lines, from product design concept to mass production, including all mechanical and electrical product assembly lines and test tools such as connectors, contacts and wires.

3. Be responsible for the simple mold and fixture design of the company's new product samples, participate in product design seminars and propose good tool solutions.

4. Assist in designing plastic molds for some products (such as DL connectors, Wabtec connectors, cable connectors, etc.). ) at busy times.

5. Be responsible for fixture design and improvement of existing production line products, and design new fixtures, machines and automation transformation of production line based on value-based product R&D team.

6. Design, develop, debug and evaluate the feasibility of equipment according to production needs.

7. Be responsible for the handover, installation and debugging of equipment and the establishment of relevant documents.

8. Communicate with personnel of various departments, discuss difficult problems in work and solve improvement problems.

9. Fixture cost evaluation and supplier evaluation.

Ps: I have been working in this company since graduation.

Reason for leaving: None

Project experience

Automation transformation of UC connector packaging manual production line (20 10-03 ~ 20 10-05)

Position: mechanical design engineer

Project Description: Project Description: Transformation of UC connector terminal manual packaging production line, from the original 1.3MM terminal manual packaging with tweezers to automatic production line packaging.

Project performance: the daily output has been increased from 15K to the present 150K, and mass production has been carried out.

Responsibilities: Project responsibilities: design of R&D and automation module.

Transformation of Motorola M/KOOC-0//KOOC-0/Card Automatic Production Line (2009-/KOOC-0/0 ~ 20/KOOC-0/0/KOOC-0/)

Position: mechanical design engineer

Project Description: Project Description: Change the original pure manual production line into a unitized semi-automatic production line.

Project performance: the daily output is increased from 5K to 15K/ day, which greatly meets the increase of orders.

Responsibilities: Project responsibilities: Responsible for the design of R&D, fixtures, semi-automatic equipment and assembly line automatic equipment.

Skill expertise

Title:

Computer level: National Computer Rank Examination Level 2.

Computer detailed skills: national computer level 2 c language,

Office automation intermediate

AUTO CAD intermediate

Skill expertise: Computer detailed skills:

1, and has obtained the certificate of National Computer Level II C Language, Office Automation Intermediate, AUTO CAD Intermediate and CNC Intermediate.

2. Skillful use of software such as PROE, CAD and CAXA.

3. Skilled use of office automation software.

Other technical capabilities:

1. Skillfully use PROE to design hand tools, fixtures, non-standard automation equipment, plastic molds, etc. Factory production line is in line with DFMEA.

2. Familiar with process engineering and industrial engineering, able to flexibly use lean production knowledge to solve practical problems, improve production equipment, optimize multi-station and carry out unit production.

3. Have a deep understanding and experience in the improvement of production process and technology, and can effectively improve and solve testing and mechanical defects.

4. Have cost awareness and personnel safety awareness.

5, familiar with some IT medical subway electric vehicle industrial connectors and other processes and bad improvements.

6. I am responsible for the debugging, improvement, preparation of operation and maintenance instructions, post-production tracking and technical support of Panther RF automatic packaging tester transferred from Switzerland.

7. At present, he is responsible for the mechanical design of non-standard automation equipment and some commonly used electronic control system design, plastic mold design, production line hand tools and fixture design.

8, familiar with mechanical processing equipment, turning, milling, grinding, CNC, EDM, wire cutting equipment processing technology.

linguistic competence

Mandarin: fluent

Cantonese: poor

English level: English major A oral English is average.

English: Overview

working strength

Development direction: mechanical design, automatic equipment mechanical design, fixture design, plastic mold design, process engineering direction.

Other requirements:

Own situation

Self-evaluation: Born and lived in Inner Mongolia since childhood. The vast and rich grassland in Inner Mongolia has given me more boldness and enthusiasm. I am simple and cheerful, careful and steady, and pay attention to teamwork. I think I am a person who is good at practical action, thinking on the basis of solving problems, good at learning, able to quickly enter the working state with innovative ability, and good at computers and electronic equipment.

At present, the company's rigorous, responsible and proactive working attitude has been recognized and praised by managers and team colleagues for many times.

Recommended reading: