Whole installation process of electric shutter door

The whole installation process of the electric shutter door is as follows:

1, first draw a line at the position of the door frame to be installed, indicate the size, and then ask the master to design a suitable electric shutter door. It is worth noting that the height inside the frame is a little higher than that of the door leaf.

2. Fix the door frame of the electric shutter door first. Here, the fixing plate at the lower part of the door frame should be removed first. It should be noted that grooves should be reserved on the ground on both sides of the hole. After the calibration is qualified, the wooden wedge should be fixed, and the iron foot of the door frame should be welded firmly with the embedded iron plate. With the strength of not less than 10MPa cement mortar or fine stone concrete plug.

3. Install the main door leaf of the electric shutter. Make sure that the electric shutter door and the wall are integrated and sealed, and then paint the hole and the wall. After painting, the gap of the door should be even and smooth, and the electric shutter door should be free and light, and there should be no looseness, tightness and rebound.

Matters needing attention in the use of electric shutter doors

1. When opening and closing the door, make sure that there is something blocking the bottom, especially the fire-proof type is linked with the fire. If not handled properly, it will be damaged or tilted. Even if it is a common type, you should pay attention to it. It's best to keep an eye on it. If there are problems such as door jam or side slip, you can stop in time to avoid further damage to the motor and door curtain.

2. For the material of the shutter door, users should also give more consideration and choose a light and durable one. Even under special circumstances, it can have higher security.

3. The motor is also very important. Don't think you can lift the door. You should know that its bearing capacity will decrease with the increase of frequency and time, so try to choose a motor with greater lifting force.