Summary of personal work in painting workshop

Summary of personal work in painting workshop

Summary is a kind of applied writing, which is to think rationally about the work that has been done and share personal work summary about the painting workshop. Let's discuss the reference together!

Chapter 1: Overview of Painting Workshop My name is XXX, female, born in XX, and I graduated from XX School. Since then, I have worked in the painting workshop of XX Co., Ltd. and obtained the second-class professional qualification of painter in XX City. XX years of painting experience has accumulated a lot of work experience and professional skills. Participated in technical research organized by the company and workshop for many times and played an important role in the scientific research team. In the work, I put forward many reasonable suggestions to optimize the scraping process, and solved or assisted in solving the shortcomings in painting construction for many times, which made corresponding contributions to the improvement of product appearance quality and production speed.

First, ideological and political performance, moral cultivation and professional ethics. Can conscientiously implement the party's basic line, principles and policies, actively study political theory and professional and technical knowledge through newspapers, books and the Internet, abide by the law, and earnestly study legal knowledge; I love my job, have a strong sense of responsibility and dedication, take the initiative to study professional knowledge seriously, have a correct working attitude and be serious and responsible.

Second, in terms of work attitude and hard work, I can love my post, truly "do one thing, love one thing, and be good at one thing", take every job seriously, devote myself to my work, help my colleagues enthusiastically, and earnestly abide by labor discipline.

Third, actively participate in process optimization to improve workshop production efficiency. Since I came to work in the painting workshop of Qixing Company, I have given full play to my rich experience and advantages in painting, and put forward 17 process optimization for the scraping process of the workshop, which has helped to solve the scraping process optimization of three series 12, so that the average scraping speed of this 12 model has changed from the original 12 minutes *8 people. At the same time, due to the optimization of scraping process, the production of grinding process is accelerated and the use of raw materials such as sandpaper is reduced. According to the annual consumption statistics of raw materials in the workshop, only the dust scraping process 12 models are optimized, and the average annual saving of 20xx-20xx putty 12% to 3 18kg and sandpaper 17% to 45,050 pieces. Raw materials alone save the company more than 200 thousand yuan every year.

Fourth, participate in the research team to solve the shortcomings in the painting process. In June of 20xx, the phenomenon of atomic ash falling off frequently occurred in the production process, which seriously affected the normal circulation of products and the overall appearance quality of products. In view of this phenomenon, I rely on rich painting experience, combined with the actual situation, from the "man-machine material method ring" five links to analyze, and gradually find out the main reasons for the phenomenon of atomic ash falling off:

1, some cracked putty in the cab was scratched by hot car. Because the company's production speed is relatively fast, and the electrophoretic paint oven was designed and manufactured in 20xx, the design concept is relatively backward, and the oven has no strong cold zone. When the cab is transferred to scraping process, the temperature is as high as 65438 000℃. At this time, the putty scraped off quickly heated up, and a layer of pore-like structure was produced on the contact surface between the putty and the cab body, which was baked later.

2. Because the company adopts the marketing strategy of multi-variety and small batch, some cab molds are not perfect, and some parts need to be scraped with too thick ash. However, after baking and cooling after baking, the putty will shrink to a certain extent, leading to the explosion of the putty;

3. The proportion of putty and curing agent is unstable. Because the weight of the putty stirred by the putty scraping machine is only about 200g, and the curing agent only needs 8g, the operator can only add the curing agent according to his own experience, and it is difficult for some inexperienced putty scraping machines to control the proportion. When the proportion of curing agent is too large, the hardness of putty increases and the toughness decreases, leading to cracking. After analyzing the main causes of the problem, I gave feedback to the workshop leaders and put forward my own solutions:

1. After the electrophoretic paint is dried, the cab is allowed a certain cooling time and transferred to the scraping process to avoid scraping putty on the hot body surface;

2. It is suggested that the workshop collect a large number of ash scraping phenomena and feed them back to the relevant departments, and ask the process and quality departments to help solve them;

3. It is suggested to increase the number of ash adjusting plates and make a comparison card for each batch of putty. Before using each batch of putty, weigh the standard proportion of putty and curing agent with a balance and mix them as samples. After ash adjustment, the ash scraper compares the color of the standard sample and controls the error within an acceptable range. After the workshop adopted my solution suggestion, there was no similar atomic ash explosion.

Fifth, do a good job of mentoring and give play to the leading role of old employees. Because the company is in the era of rapid development, the variety and quantity of products are increasing, resulting in a shortage of operators. As a special industry, painting has no special training structure in society, and the newly recruited employees are blank in professional technology. During my seven years in Seven Star Company, I have taught seven apprentices. In the process of mentoring, I give full play to the mentoring role of the old employees and spare no effort to impart my accumulated experience and professional technical skills to the new employees, so that they can quickly get familiar with the technical requirements of this position and master the operational skills of this position. Now seven people have become the technical backbone of the workshop.

Sixth, adhere to theoretical study and constantly improve yourself. As an old employee with many years of painting experience, I deeply know that with the continuous development of society, new materials and new processes will appear in the painting industry. These new processes and materials will bring the painting industry into a brand-new realm, and it can no longer adapt to the development of the industry. For this reason, I keep pressuring myself and charging myself after work. In my spare time, I taught myself professional painting books such as Painting Technology, Painting Technology (Third Edition), New Painting Technology for Automobile, and Painter (Technician, Senior Technician), which greatly improved my professional level and professional skills.

In short, during my time in the painting industry, my professional skills and professional skills have been significantly improved through continuous study and field exploration. In the future work, I will, as always, strengthen the study of theoretical knowledge, and apply the new knowledge I have learned to my daily work, and constantly improve my professional skills and professional skills.

Chapter II: Personal Summary of Spraying Workshop I came to the company in xx and was responsible for the production management and daily affairs management of spraying workshop. Xx years passed in tension and busyness, and my heart was full of sighs. Although there was no vigorous record this year, it also experienced extraordinary tests and tempering. On the occasion of bidding farewell to the old and welcoming the new, I would like to sum up the work and gains and losses of this year and wish our company a better new year.

First, the annual work completion:

1. In order to be familiar with the company's products and master the technological process as soon as possible at the initial stage of employment, we conducted internships and operations in each team of the workshop, participated in the picking work of the picking group, became familiar with the products and manufacturing processes, and then cleaned, counted and sorted out the various areas of the workshop and the sluggish goods warehouse, which greatly shortened the time for workshop inventory. In March, I went to El Erdos, Inner Mongolia. Due to the color error of the company's products, the company leaders arranged to complete the back spraying work of about 900 square meters.

2. During his tenure as packaging director, he first made a comprehensive adjustment to the organization staff, trained new employees, and made a comprehensive arrangement and division of all packaging areas, which were divided into waiting area, packaging work area, finished product turnover area, finished product waiting area and finished product waiting area, which was obviously improved compared with the previous period. The product packaging implements assembly line operation, which changes the previous random packaging mode and improves the packaging efficiency. All products are placed strictly by region, which has changed the poor and chaotic situation in the past, tracked and understood the working status of employees in time, and improved the team spirit and cohesion of employees. Later, he was responsible for the production plan of spraying night shift and 5s management of the whole workshop, divided and rectified all areas of the workshop, and packaged all products from delivery to off-line in strict accordance with the order store, which made the site significantly improved.