What should I use to clean the exterior wall tiles?

Question 1: What is used to clean the external wall tiles?

1. Wet mop can be used for daily cleaning of exterior wall tiles.

You can first remove some fine sand, dust, or some dirty things stuck on the surface of ceramic tiles with a broom or a dust mop, and then wipe the wall with a clean rag or a mop soaked in water. But if you wipe it with a wet mop, remember to wipe it again with a dry cloth, so that the outer wall will be clean.

Secondly, clean the external wall tiles with wall protectant.

If the exterior wall brick is pasted with polished quartz brick, polished quartz brick will generally leave many tiny concave-convex pores after polishing, which is what we call capillary pores. If it is polluted by tea, coffee, soy sauce or ink, it will easily penetrate into the ceramic tile, so it should be treated in time, so many manufacturers will process a layer of protective agent on the ceramic tile before leaving the factory. If there is residual protective agent on the polished brick surface, we can sprinkle talcum powder on the brick surface and then wipe it back and forth with dry coarse cotton cloth to remove dirt.

Note: After the construction is completed, cleaning solvents with high pH value or strong corrosiveness cannot be used for cleaning, because the chemical characteristics contained in them will destroy the protective layer on the surface of the brick and reduce the antifouling performance of the external wall brick.

Third, use bleach to clean the external wall tiles.

If it is found that some dark pollutants accidentally pollute the wall, in order to avoid infiltration, you can add water with bleach sold in the supermarket, then apply it to the dirty position properly, cover it with plastic wrap for a few days, and then wipe it with water.

Fourth, the cleaning method of stubborn stains on exterior wall tiles

There will inevitably be many stubborn stains on the exterior wall tiles, such as black scratches, oil stains, or rust spots caused by iron. If the local adhesion of the external wall tiles is difficult to remove, then we can use decontamination powder, decontamination paste, or car wax, and then wipe it back and forth with clean coarse cotton cloth.

Question 2: What should I use to clean the external wall tiles? Since the establishment of Baoliangjie service, all the new customers we have received have asked this question like the landlord. We have answered many such questions. Let's take a look and share our company's experience with the landlord:

1, when the surface of ceramic tile is polluted by cement? A concrete thin-layer cleaning agent can be used, which is suitable for cleaning internal and external wall tiles (glazed tiles, integral tiles, vitrified tiles, polished tiles), decorative tiles, clay products, ash, lime slag and cement thin layers on natural stone materials.

2. When the surface of the ceramic tile of the inner and outer walls is polluted by the caulking agent? You can use a special cleaning agent for caulking agent.

3. When the ceramic tile surface of the inner and outer walls is polluted by rust spots? First of all, you need to judge whether the rust is on the surface of the tile or has penetrated into it. By analyzing the causes of rust, such as iron railings, iron frames and iron products, it can be judged that this rust is on the surface of ceramic tiles, and Kline rust remover is selected for cleaning. If the rust has penetrated into the interior of the tile, it can be cleaned with Kline strong rust remover. This kind of phenomenon mostly occurs on the decorative tiles or split brick. Strong rust remover can be used to remove rust spots on acid-resistant natural or artificial stones. In addition, the corroded substance in natural stone will automatically change its original natural appearance.

4. When paint is found on the tiles of the interior and exterior walls? What cleaning agent should be used for tiles? Baoliangjie service personnel use degreaser scavenger. The degreasing agent is suitable for cleaning the surfaces of tiles, stones, glass, plastics, metal products and other objects. It can effectively remove paint, water-based paint, asphalt, stickies, adhesive tape, adhesive tape residue, lipstick trace, soot, etc. on the surface of the above objects.

At the same time, the hotel's ceramics, enamel products, glass products, plastic products, aluminum products, tiles, floor tiles and so on are cleaned.

5. Use alkaline cleaner for ice cream.

6, lime scale using acidic cleaner.

Here are some reminders for novices:

1, rubber gloves are required when using the above detergents.

2. Remove stains and then scrub the brick surface with clear water.

3. The market or supermarket has the latest decontamination detergent. Please refer to the above decontamination scope and methods.

4. Good-quality tiles, such as Asian and Champion tiles, have less air bubbles and strong pollution resistance. When it happens, it can be wiped with a wet cloth in time. Don't use too many chemicals, which may be counterproductive and affect the luster, waterproof and life of tiles.

Of course, clean water is essential.

Question 3: What should be used to clean the external wall tiles after they are pasted? You put up that kind of exterior wall brick. If it is an all-in-one machine, they usually use oxalic acid to wash it, and hardware stores usually sell it.

Question 4: The cleaning method of external wall brick is 100. Exterior wall tiles are gray in wet state. Is it clean? This situation is generally caused by cement mortar pollution, so it is recommended to use Kline concrete thin-layer cleaning agent. If it is washed with oxalic acid, it may damage the surface of ceramic tile. In this case, you can choose a special cleaning agent for caulking agent. If the tile has been burnt out, it may not be repaired anyway!

Question 5: What cleaning agent should be used to clean ceramic tiles and how to clean external wall tiles?

In modern society, with the continuous improvement of people's living standards, ceramic tiles have entered thousands of households. Tiles are easy to take care of and clean, so you don't have to worry about getting wet by water and being scratched by hard objects. Although ceramic tiles have some advantages, they will encounter all kinds of pollution after being used for a long time, which is inconvenient to clean, especially exterior wall tiles. So how to solve this problem?

1. How to clean the surface of external wall tile polluted by cement? If there is not much contaminated cement, it can be removed by direct eradication. If there is too much contaminated cement, you can use a professional concrete cleaner to clean it.

2. How to clean the exterior wall tiles when they encounter pan-alkali? You can use the dealkalizer to clean them. Alkaline cleaning agents can clean natural whitening substances on the surfaces of ceramic tiles, decorative tiles, clay products, natural stones and concrete products, as well as whitening substances formed after unscientific cleaning.

3. If there is a lot of dust pollution, how to clean the external wall tiles can be washed directly with a mop dipped in water, which saves trouble and effort.

4. How to clean the surface of exterior wall tiles polluted by rust spots? This kind of pollution should be removed with professional rust remover.

5. How to clean the paint on the exterior wall tiles? It is recommended to use degreasing agent and paint remover for cleaning.

6, lime scale using acidic cleaner.

Question 6: What material is good for washing exterior wall tiles? 10% oxalic acid mixed water solution is directly washed, and then washed with clear water.

Question 7: How to clean exterior wall tiles with super automatic emulsifier?

Key points:

* * * * * Emulsifier upgraded from passive emulsification to automatic emulsification, successfully achieved a revolutionary breakthrough, leading the world.

* * * *11The world-leading special automatic emulsification function makes him omnipotent. Beyond all emulsifiers.

* * * * * Automatic emulsification+automatic dissolution+automatic penetration+automatic dispersion+automatic degreasing+automatic gel breaking+automatic degreasing+automatic scale dissolution+automatic cleaning+automatic wax removal+automatic decontamination, perfect versatility and powerful beyond your imagination.

* * * * * Replacing the existing emulsion cleaner can reduce your cost by 30-70% and greatly improve the effect.

* * * * * One raw material can produce 30 kinds of products, a Chinese odyssey.

* * * * * Industrial liquid oil is dissolved in milk at an alarming rate.

Super automatic emulsifier is the latest super automatic emulsifier developed by Chengdu Hengfeng Hongye Detergent Factory, which surpasses the existing emulsifier and leads the world. Its super-strong automatic emulsification function is incomparable to ordinary emulsifier, and it has the following characteristics:

First, special functions

1, with super automatic emulsification function, can automatically emulsify two or more immiscible substances into single or composite chemical substances with surface activity in a uniform dispersion system. There is no need for heating equipment such as reaction kettle and emulsifying machine. This automatic emulsification function can't be completed by any emulsifier in the world at present, and it has the international leading level.

2. Super automatic dissolving function, which can automatically dissolve petroleum, petroleum accessories, lubricating oil, mechanical oil, mineral oil, clutch oil, gear oil, brake oil, engine oil, ink, demoulding oil, compressor oil, refrigeration oil, vacuum pump oil, internal combustion engine oil, diesel engine oil, gasoline engine oil, marine oil, bearing oil, guide rail oil, hydraulic oil, hydraulic transmission oil and metalworking oil. The whole dissolution process is completed automatically without large equipment. This automatic dissolution function can not be completed by any solvent in the world at present, and it has the international leading level.

3, super automatic infiltration function, automatically penetrate the tough outer layer of the material and directly penetrate into the core. At present, this automatic infiltration function can not be completed by any penetrant in the world, and it has the international leading level.

4. Super automatic dispersion function, which can automatically disperse inorganic and organic solid particles that are insoluble in liquid, and at the same time prevent the settlement and reunion of solid particles to achieve the purpose of suspension.

5. Super automatic descaling function, which can automatically decompose, dissolve and peel off dirt, oil dirt, tea dirt, acid rain dirt, sweat dirt, etc. , and quickly remove dirt. This automatic descaling function can not be completed by any descaling agent in the world at present, and it has the international leading level.

6. Super automatic glue breaking function, which can automatically destroy the bonding structure, realize the bonding failure and complete the removal of sticky objects. This automatic glue breaking function can not be completed by any degumming agent in the world at present, and it has the international leading level.

7. Super automatic wax removal function, which can automatically decompose the molecular structure of various waxes, so as to achieve wax failure and complete wax removal. This automatic wax removal function can not be completed by any wax remover in the world at present, and it has the international leading level.

8. Super automatic degreasing function, which can automatically saponify and decompose the fat particle structure of various oils, thus realizing the degreasing of fat particles. This automatic degreasing function can not be completed by any degreasing agent in the world at present, and it has the international leading level.

9. Super automatic degreasing function, which can automatically decompose, dissolve, saponify and separate all kinds of edible oil, vegetable oil, mineral oil, essential oil, mechanical oil, petroleum, inorganic oil and organic oil to achieve the purpose of rapid degreasing. This automatic degreasing function can not be completed by any degreasing agent in the world at present, and it has the international leading level.

10, with super automatic cleaning function, can automatically decompose, distinguish, separate, dissolve and resist redeposition for various industrial stains, civil stains, household stains, heavy oil stains and environmental stains, thus achieving the purpose of rapid decontamination. This automatic cleaning function can not be completed by any cleaning agent in the world at present, and it has the international leading level.

1 1, with super automatic decontamination function, can automatically decompose, distinguish, peel off and resist redeposition of various perspiration stains, heavy oil stains and household stains, so as to achieve the purpose of rapid decontamination. This automatic decontamination function can not be completed by any detergent in the world at present, and it has the international leading level.

Second, the characteristics of super automatic emulsifier:

1, alkaline, alkali-resistant and acid-resistant. Hard water resistance.

2......& gt& gt

Question 8: What cleaning agent is good for tiles, how to clean tiles and how to clean exterior tiles? What cleaning agent is good for tiles, how to clean tiles and how to clean exterior tiles? With the improvement of social living standards, ceramic tiles have entered thousands of households. But the tiles have been used for a long time. How to clean them after encountering all kinds of pollution? It's also very particular here. What cleaning agent should be used for tiles when encountering the following stains? Next, let's take a look.

1.

When the surface of ceramic tile is polluted by cement, what cleaning agent should be used for ceramic tile? A concrete thin-layer cleaning agent can be used, which is suitable for cleaning internal and external wall tiles (glazed tiles, integral tiles, vitrified tiles, polished tiles), decorative tiles, clay products, ash, lime slag and cement thin layers on natural stone materials.

How to clean the tiles?

1. Wet the surface thoroughly and wear suitable gloves; 2. Uniformly coating the product on the surface of the ceramic tile; 3. The product can work for 5-20 minutes; 4. Scrub heavy stains with a brush; 5. Rinse thoroughly with water.

2.

The surface of ceramic tiles on the inner and outer walls is polluted by caulking agent. What cleaning agent should be used for tiles? You can use a special cleaning agent for caulking agent.

How to clean the tiles?

3.

What kind of cleaning agent should be used for tiles when they encounter pan-alkali? Desalination agent is developed according to various whitening characteristics of ceramic tile and stone surface. According to the different types of whitening, the corresponding dealkalizing agents are scientifically designed, including natural whitening and reactive whitening cleaners. It can clean the natural whitening substances on the surfaces of ceramic tiles, decorative tiles, clay products, natural stones and concrete products and the whitening substances formed after unscientific cleaning respectively. How to clean the tiles?

1. First determine the materials to be cleaned and the types of stains. For uncertain stains, local tests should be carried out first;

2. Then, according to the characteristics of stains and materials, use corresponding cleaning agents to clean them respectively. When the stain is heavy, the corresponding dealkalizing agent can be poured on the stain for a period of time and cleaned repeatedly;

3. When the stain is thick, shovel off the surface part with a shovel before cleaning;

4. Mixed stains can be cleaned with Kline tile cleaner first, and then with alkali remover.

4.

The surface of internal and external walls is polluted by rust spots. What cleaning agent should be used for ceramic tiles? First of all, you need to judge whether the rust is on the surface of the tile or has penetrated into it. By analyzing the causes of rust, such as iron railings, iron frames and iron products, it can be judged that this rust is on the surface of ceramic tiles, and Kline rust remover is selected for cleaning. If the rust has penetrated into the interior of the tile, it can be cleaned with Kline strong rust remover. This kind of phenomenon mostly occurs on the decorative tiles or split brick. Strong rust remover can be used to remove rust spots on acid-resistant natural or artificial stones. In addition, the corroded substance in natural stone will automatically change its original natural appearance. How to clean the tiles?

1. Undiluted products should be coated on the dry stone surface. In order to avoid discoloration, all stone surfaces should be coated;

2. The working time of the product is 24 hours;

3. Do not let the treated surface dry, and use a wet cloth if necessary;

4. Rinse thoroughly with water;

5. If necessary, repeat the above operation. 5.

Is there any paint on the interior and exterior tiles? What cleaning agent should be used for tiles? It is recommended to use "degreasing agent"-Kline paint remover.

The degreasing agent is suitable for cleaning the surfaces of tiles, stones, glass, plastics, metal products and other objects. It can effectively remove paint, water-based paint, asphalt, stickies, adhesive tape, adhesive tape residue, lipstick trace, soot, etc. on the surface of the above objects.

6.

The surface of ceramic tile is polluted by oil, tea, coffee and ink. What cleaning agent should be used for tiles? Porcelain Jiebao adopts pure natural mineral raw materials, which has good friction resistance and hydrolysis resistance; Suitable for cleaning ceramic products, enamel products, glass products, plastic products, aluminum products, ceramic tiles, floor tiles and so on. In homes, restaurants and hotels.

7. Use alkaline cleaner for ice cream.

8.

Use acid cleaner to remove lime scale.

Remarks: Rubber gloves should be worn when using detergents of 1 or above.

2. Remove stains and then scrub the brick surface with clear water.

3. The market or supermarket has the latest decontamination detergent. Please refer to the above decontamination scope and methods.

4. Good-quality tiles, such as Asian and Champion tiles, have less air bubbles and strong pollution resistance. When it happens, it can be wiped with a wet cloth in time. Don't use too many chemicals, which may be counterproductive and affect the luster, waterproof and life of tiles. So how to clean the most difficult external wall brick? Generally, a special cleaning company should be hired for the cleaning of exterior wall tiles. Exterior wall cleaning is a kind of high-altitude cleaning and a very dangerous cleaning construction project. Exterior wall cleaning should not only ensure the cleanliness of cleaning materials, but also ensure the personal safety of overhead cleaning technicians ... >>

Question 9: What should I use to wash the tiles? What should I use to wash tiles? Children use clean water and toilet cleaner to mix into a solution, which is about 2 1.

Then soak for 10 minute (if it is dirty and stubborn, the time can be appropriately extended, which is harmless to ceramics).

Note that you need to wear rubber gloves when using toilet cleaner, otherwise you will come into contact with it.

Soon I will feel hot on my hands. If our porcelain has stamping lines,

Dilute the solution a little, soak for 4 to 5 hours, and you will have a little experience.

Personally, I pay special attention to the appearance, and I have to scrub it carefully every time I get the collection.

I have explored many washing methods, such as using traditional 84, using gasoline, using rice,

Use various brands of detergents, use various washing powders and soaps,

How should I clean up? Soaking in traditional 84 disinfectant,

Although it can achieve good results, it is very harmful to the glaze of ceramics.

I even happened to see a matte glaze, which felt like water porcelain.

This is not worth the loss. Is there a better way? After groping,

Summed up a little experience, take your time.

1, let's look at the first picture.

Need to prepare: detergent, plenty of water, a soft brush (toothbrush is enough,

There is no language if you want to use steel balls), rubber gloves, vaseline (available in cosmetics stores, you can use Dabao beauty cream instead),

Another important point is that toilet cleaner (preferably the Wei Chao series of Libai Group)

It's available in the supermarket, so you need to buy something with a clear price tag: it doesn't hurt the ceramic surface)

Don't worry about cleaning China. Let's start the cleaning step now.

Children use clean water and toilet cleaner to mix into a solution, which is about 2 1.

Then soak for 10 minute (if it is dirty and stubborn, the time can be appropriately extended, which is harmless to ceramics).

Note that you need to wear rubber gloves when using toilet cleaner, otherwise you will come into contact with it.

Soon I will feel hot on my hands. If our porcelain has stamping lines,

Dilute the solution slightly, soak for 4-5 hours, and after soaking,

Use detergents together, wash with plenty of water, and dry with a towel after cleaning.

Apply vaseline to the glaze of porcelain (this is the routine maintenance method of porcelain) and touch it evenly with your fingers.

Question 10: What materials should be used to clean the ceramic tile wall? Speaking of this problem, I want to say by the way. I have seen and reported such a thing on the Internet before. An employee of a housekeeping company went to a client's house to clean. Guest arc has been muttering for an hour and hasn't even cleaned a window. The employee said that his window glass is all oil, which is difficult to clean! I want to talk about it here. Many people say that employees of domestic companies waste time. what can I say? According to my experience, generally speaking, a kitchen takes 4-6 hours. Of course, it won't take me so long. But it usually takes a long time. Some customers are just unreasonable. Let others do what you can't do at all, others can do it, but employees are not gods after all. It will definitely take time. It is true that someone is wasting time, but it is not like this. Usually, in rare cases, customers will call and let employees pass by, and then say it's over. The employees watched and wiped the floor, that is, for more than an hour. After wiping, they could not be sent to work. Two dollars and fifty cents an hour. What should I eat today? This is the time he may try to kill. In the off-season, there is not much work in the afternoon. Working for two or three hours in the morning is less than ten dollars, which is really too much for life, so he will waste time. Hey, who has who's difficulties? In fact, I think real domestic companies should have a starting price to avoid some customers engaging in this kind of thing for an hour and a half. And many customers didn't think of this layer at all. This is beside the point.

Before cleaning the glass in the kitchen, be sure to prepare something: small blades, newspapers, detergent water or detergent water. I'll say something beside the point here by the way. In fact, the so-called degreasing agents used by some domestic companies are caustic soda water, caustic soda and sodium hydroxide. Very corrosive, sometimes rubber gloves will be corroded by it after entering water. Why not use detergent water or detergent water instead of degreasing agent? Let me tell you something. In fact, it is not easy to use the so-called degreasing agent. Not hot, degreasing effect is not good. Don't hit with steel balls, it's easy to scratch the glass and make it sticky. Steel balls can't be used in the future. Washing powder water or detergent water is not used for oil removal, but for lubrication.

How to clean it up? Wet it with the water we prepared, as long as it doesn't flow downwards, then wipe it again and scrape it with a small blade. After scraping, wipe off the oil on the small blade with torn newspaper. Then shave. You can scrape it clean with a small blade. You can try if you don't believe me. When you have finished shaving, wipe it clean. At this time, it is no different from ordinary glass, which is very convenient. Finally, clean it as we do with ordinary glass.

Some customers may say that our family has professional deoiling products. Please use them. The net effect of lampblack is very good. In fact, that guy only works when the oil is not thick. Even though it's thick. It's not very easy to use, and he has decomposition time. If the customer insists that you use it, you can use it. The waiting time is also the time for customers to let you rub it, and laugh it off. That guy's cost price is also very high.

How to clean the screen window in the kitchen?

Be sure to remove it, put it on the bathroom surface, and wipe it with hot detergent water (save money with detergent water). Wipe one side and then the other. After wiping, rinse with water, dry and put it on.

How to clean kitchen tiles?

Make good use of your little blade. You'd better prepare newspapers, washing powder water or detergent water. It's like cleaning glass. Scrape it. Steel wire balls can be used in places where oil is thin. Just wipe it with a towel at last.

In addition: there is-greasy windows are polished very skillfully.

Grease on the kitchen screen will block the air circulation. How can such a cooking environment make people feel comfortable?

Take some flour, add water to make a thin batter, quickly brush it on both sides of the screen window and wipe it evenly. 10 minutes later, the batter has absorbed the greasy on the screen window. Brush it several times at this time, and the greasy will fall off with the batter. Rinse it with water again and the oil stain will disappear. Clean the greasy glass windows in the kitchen,

There are also wonderful ideas.

Wipe the dust off the glass with a wet cloth first, and then wipe it with an old newspaper, so that the ink in the newspaper can absorb the oil stains, so that the stains can be removed. Although this method is effective, it takes nearly 10 newspaper to clean a glass. Therefore, don't throw away the old newspapers you usually read, but keep them to clean the greasy glass windows, which is quite useful.

For the glass blackened by oil, you can heat the vinegar at home and then wipe it with a cloth dipped in hot vinegar. This is based on the principle that vinegar can corrode oil stains, so that the glass blackened by oil can be easily cleaned without any trouble.

This method can be used not only for glass windows, but also for >>