Where is the new Linfen airport in Shanxi? What is the scale?

Well, the news is true. Approved by the National Development and Reform Commission at the end of last year, it is now under construction. The new airport is located in Li Qiao Town in the south of Shanxi Province, and it is the second 4C-class airport in Shanxi Province.

4C represents the flight zone level of civil aviation airport. The level of airport flight area refers to the performance of determining what level of aircraft can use the runway and corresponding facilities of this airport. Airports are classified according to this ability, which is called flight zone level. The flight zone level is represented by a two-part code. The first part is a number, which indicates the runway performance and obstacle limit corresponding to the aircraft performance. The second part is letters, indicating the width of runway and taxiway required by the size of the aircraft. Therefore, for the runway, the first number of the height layer of the flight area indicates the required flight field length, and the second letter indicates the maximum span and the maximum track width of the corresponding aircraft. Their corresponding data are as follows:

figure

Runway length

1- less than 800 meters

2-800m to1200m

3-1200m to1800m

4- 1800 meters above

Letters. Aircraft wingspan. Aircraft wheel track.

Less than 5 meters and less than 4.5 meters

B-5m to 24m-4.5m to 6m

C-24m to 36m-6m to 9m

D-36m to 52m-9m to 14m

East -52m to 60m-9m to 14m.

The general trunk airport has reached the flight level of more than 4D, which can meet the flight requirements of other major aircraft except Boeing 747, Airbus 340 and Airbus 300. At present, 4E-class airports can land at every airport except the latest Airbus 380, and other large aircraft can take off and land. Class 4C can only meet Boeing 737 flights at most, so it can only be used as a regional airport.