Wuhan oppein gas stove after-sales service telephone fangguan maintenance Dian

Wuhan Ou Pai Gas Stove Maintenance 400-7368-298 No matter where you dial this number, the system will automatically switch to Wuhan Ou Pai Gas Stove Unified Service Tel: 027-5 123-86 19 Common failures and troubleshooting methods of manufacturers' gas stove maintenance points:

1, fire or flame

A, the throttle is too small, adjust the throttle; B, the nozzle is too small, expand the nozzle;

C, the gas pipeline is mixed with air, and the ignition action is repeated to exhaust the air;

D. If the pressure in front of the furnace is too high, adjust the opening of the main valve appropriately, and ask professionals to adjust or repair the liquefied gas pressure regulator (the outlet pressure is too high).

Step 2 temper

A, strong wind blowing flame, avoid strong wind blowing directly to the flame; B, the air pressure is too low, increase the valve opening and ask the gas supply department whether to stop gas; C, sealed combustion, provide appropriate air volume; D, the throttle is too large, turn down the throttle; E, the design is unreasonable, the fire hole diameter is too large, and the space is too large;

F. If the nozzle is too small or blocked, replace the nozzle or remove the impurities in the nozzle with a poke needle; G, fire cover is not put away, adjust the installation position; H, fire cover, burner aging, replace the fire cover, burner.

3. Black smoke or yellow flame

A, throttle closed, appropriate to open the throttle; B, forming a spider web in the spray pipe, and removing the spider web; C, the cooker model is wrong, and it is also wrong to use artificial gas as a liquefied gas stove; D, blocking the fire hole of the ignition ring and cleaning the fire hole of the ignition ring; E, there is a foreign body in the nozzle hole of the cooker, and clean the foreign body.

Four, air leakage or gas smell

A. the hose is broken or improperly connected.

Replace the new hose and fix it; B, valve joint seal aging, replace the sealing ring; C. valves

If it fails for a long time, replace it with a new valve;

D, burner is not lit, troubleshooting, re-ignition;

E, remove the fire or flame, remove the fire.

(according to the previous method to solve); F, universal joint air leakage, repair or replace the universal joint;

G, welding is not firm, there are sand holes, replace or weld tee again; H, nozzles are not nested,

Reinstall the nozzle; I. replace the steel cylinder, angle valve or pressure regulator.

Verb (abbreviation of verb) Other phenomena

1, Changyan A, the assembly is stuck and cannot be recovered, so the general process should be replaced; B, the valve core circlip falls off, the total process of repair or replacement; Poor assembly accuracy, reassemble.