What's wrong with putting a cup of hot water in the refrigerator without cooling? Chengdu refrigerator maintenance

Common reasons: 1, the temperature in the refrigerator is low. When the hot water is cold, the water will evaporate quickly and then solidify on the internal evaporator, which can form a thick frost layer on the evaporator in a short time, thus preventing the evaporator from transferring the heat in the refrigerator to the outside, which may affect the refrigeration of the refrigerator; 2. When the hot steam encounters condensation, the probe of the thermostat is frosted, so it is impossible to detect the temperature in the box, which makes the compressor stop working, which may lead to refrigeration failure. Only after the frost layer melts can the compressor work again. Suggested solution: 1, because the temperature at home is too low. If the thermostat has a winter temperature compensation switch, when the indoor temperature is lower than 15 degrees, the switch should be turned on to ensure that the compressor can start working smoothly. When spring comes and the indoor temperature is higher than 15 degrees, the switch should be turned off to avoid frequent start-up of the compressor, which will lead to an increase in power consumption. If the compressor can't start working, it should be caused by abnormal performance of the control circuit or damage of the electric heating element. You should contact after-sales service or ask a professional to repair it. 2. In case of temporary emergency, you can adjust it to the highest gear in the morning, noon and evening every day, then force the compressor to start working, and then move it back to a little gear.