Fuyang Normal University School of Information Engineering Dormitory Power

The electricity consumption in the dormitory of Information Engineering College of Fuyang Normal University is about 1000 watts.

The electricity in school dormitories is generally around 1000 watts. The power supply circuit of school dormitory is designed and installed according to small demand and low power. Generally speaking, the maximum load that each dormitory can bear is about 1000 watts (the design of each school is different), which can only meet the daily electricity consumption of lighting, water dispensers, computers and so on.

General desktop LCD computer 350W, notebook 70w, four notebooks 280W. Generally, 1kW is considered as high power, because the power capacity of an ordinary socket is 6A, that is, 220×6= 1320W. Considering a certain margin, it is 1kW. If it is too large, it will cause the circuit to heat up, especially the plug position, which is easy to burn out. The better socket is 10A, and the special socket can reach more than 15A (such as the special socket for air conditioning). You'd better buy bulls or bullets or sockets from Han Tai, which are of good quality and not easy to burn. If the dormitory can't stand four computers, buying a "power converter" can generally solve the problem of lever brake.

The use of high-power electrical appliances is likely to lead to wire overload, resulting in increased current and wire heating. The more overload, the faster the temperature rises. The allowable temperature of wire insulation is generally 60℃. If the line is overloaded for a long time, the calorific value of the line will increase and the insulation layer will accelerate aging. When the temperature is higher than 250℃, the insulation layer will spontaneously ignite and separate from the wire, resulting in short circuit and fire accident.