How to obtain the qualification of third-party software testing? What department do I need to apply to?

How to obtain the qualification of third-party software testing? What department do I need to apply to? At present, the third-party independent testing institutions are only national and provincial, generally provincial software evaluation centers. However, some software testing institutions established by enterprises meet the requirements of ISO 17025 system and become national or provincial software testing centers.

I sent you the address, Baidu. Hi

How does the company obtain the qualification of factory inspection? Which departments do I need to apply to? There are still many factories in the Yangtze River Delta that have inspected ICTI, but they basically need the help of consulting companies, otherwise it will be difficult to pass and a lot of documents will be needed.

ICTI file list

serial number

ICTI file name

serial number

ICTI form

1 social responsibility hand

1 temperature/humidity record and wind speed test record

2 Employment procedures

Records of employee representative meetings and elections (once every three months)

3. Compulsory labor procedures and the use of prison labor procedures are prohibited.

3 voluntary overtime signature form

4 Anti-discrimination procedures

4 Labor insurance supplies distribution records

Procedures for prohibiting the employment of child labor and procedures for protecting underage workers

5 EHS safety meeting minutes (once every two months)

6 process identification control program for new material machinery and equipment

6 drug list/use records/statistical analysis and training records of work-related injuries

7 salary scheme and personnel file management procedures

7 List/photos of emergency teams

8 temperature and humidity management procedures

8. List/photos and emergency contact numbers of workshop safety leaders.

9 Measures for the Election of Staff and Workers' Representatives

9 warning letter

10 complaint procedure

10 fire drill record (factory and dormitory), fire drill record pointing table.

1 1 reward and punishment control program

1 1 guest record

12 Procedures for Prevention of Blood-borne Diseases 12 Hygienic Checklist for Drinking fountains

13 emergency procedures 13 toilet hygiene list

14 accident investigation procedure 14 inspection records of bathing facilities and eye washing facilities.

15 closure control program 15 inspection records of cranes, cranes and ropeways.

16 hazardous energy identification control program 16 building structure safety inspection record and power line safety inspection record.

17 Corrective and Preventive Control Procedure 17 Kitchen Hygiene Record Form

18 emergency control procedures 18 inspection records of emergency lights and fire alarms.

19 control procedures for collection and update of laws, regulations and other documents 19 inspection records of light box exits and fire extinguishers.

20 Voluntary Overtime Guide 20 Fire hydrant inspection records

2 1 Guide to the Use of Labor Protection Articles 2 1 Safety Production Training Record and Confined Space Training Record

22 Temporary open flame operation procedures and hot work procedures 22 factory discipline and factory regulations training records

23 Operating instructions for maintenance personnel 23 Training records of chemical supply and hazardous waste treatment

24 noise test guide 24 list of laws and regulations and updated tracking record form

25 kitchen hygiene management measures 25 first aid training records and medical waste recycling training records

26 Measures for the Administration of Dangerous Goods and Flammable Goods 26 Maintenance Personnel Training Records

27 labor contract signing guide 27 foreign personnel training records, foreign personnel construction monitoring records

28 first aid methods 28 open flame operation application record

29 eye washing and shower guide 29 chemical list and MSDS data

Chemicals make Code 30 the maximum load-bearing and height limit of the floor.

3 1 Operation Instruction for Fire Control Facilities 3 1 Maintenance Records of Mechanical Equipment (Grade II and III)

32 septic tank operation instruction 32 sharp weapon distribution and recycling records

33 disinfectant guide 33 oil filter inspection records

34 Safety Code and Work Guide 34 Safety Training Records

35 Employee Manual, Factory Regulations, Dormitory System 35 Evaluation Records of Hazard Factors of New Equipment, Materials and Processes

36 EHS Work Guide for Outsiders 36 Hazard Energy Assessment Record Form and Labor Protection Articles Assessment Record Form

37 Environmental Health Policy 37 Employee Basic Data Sheet and Labor Contract

38 Notes for Visitors 38 Employees' Vacation

39 fire knowledge training materials 39 employee resignation form

40 laws and regulations, a set of attendance records and 40-year payroll.

4 1 Factory plan and fire plan (inside all safety exits) 4 1 Canteen and security contract

Required certificates and reports

Serial number certificate/report serial number certificate/report

1 business license 17 safety officer qualification certificate (letter of appointment, training certificate)

2 Health Permit (Address: Company Name) 18 Registration Certificate for Minor Workers (if any)

3. Kitchen Worker's Health Certificate 19 Comprehensive Timing (Overtime) Approval

4 doctor qualification certificate (factory with more than 500 employees) 20 water quality (production and drinking water) test report

5 environmental protection approval 2 1 toxic and harmful air detection report in the workshop

6 building fire control acceptance opinion 22 noise test report

7 Notice of Winning Bid/Property Certificate for Completion of Construction Project 23 Certificate that the fire fighting equipment has been inspected by qualified institutions.

8. Records and vouchers of social insurance payment and list of payers 24. Agreements and vouchers of qualified industrial waste recycling institutions (five copies)

9. Social insurance meets the requirements. 25 qualification certificate of hazardous waste industrial waste recycling unit

10 annual social insurance certificate 26 agreement and medical waste recycling certificate of qualified institutions

1 1 special equipment registration certificate, acceptance certificate, annual inspection certificate 27 agreement and domestic waste recycling certificate issued by qualified institutions.

12 certificate of special type of work (elevator, air compressor, electrician, boiler, forklift) 28 septic tank cleaning agreement and certificate of cleaning qualification institution.

13 occupational disease physical examination certificate 29 sewage discharge permit for domestic sewage, industrial sewage, waste gas and noise

14 safety certificate and fire certificate 30 air emission test report

15 emergency personnel qualification certificate 3 1 foreign construction personnel (welder) qualification certificate

16 Building Bearing Certificate (workshop design unit) 32 Qualification test report of lightning protection facilities and lightning protection certificate

Necessary hardware configuration

Serial number hardware serial number hardware

1 eye washer, shower (area where chemicals are heavily used) 12 medicine cabinet and first aid medicine (each floor)

2 Thermohygrometer (workshop where workers work) 13 Equipment protection device

3 anemometer 14 roof and floor fence (open)

4 Wheel fixing device (parking place) 15 ladder safety handrail (above 1M)

5 Fire fighting facilities (fire extinguishers, fire hydrants, alarm bells) 16 lightning protection device

6 emergency lights and exit signs (light box type/night light type) 17 local exhaust device (chemical operation area)

Explosion-proof lights (warehouse, chemical warehouse, oil spraying cabinet, oil mixing room, etc.). ) 18 hazardous industrial trash can (with iron cover)

8 Explosion-proof switch, exhaust fan (chemical bin) 19 life medical trash can

Automatic spherical fire extinguisher (chemical warehouse) 20 labor protection articles (earplugs, eye masks, masks, gloves, etc. )

10 secondary leak-proof device (chemical warehouse, area where chemicals are used) 2 1 wide-angle lens (with bends in the factory)

1 1 electrostatic conduction device (chemical warehouse, large oil drum) 22

Post a sign

Serial number identification serial number identification

1 Height limit (goods opposite warehouse and workshop) 10 Wear labor protection tips.

2 floor load (per floor) 1 1 tertiary trash can

3 Weight limitation (elevator, hanger) 12 Emergency assembly area for fire drill

4 speed limit (at the factory gate) 13 tips of various risk factors (high temperature, electricity, meeting, falling, etc. )

5 List of emergency telephone numbers and contact list of first responders and employee representatives of unsafe exits 14

6 No fireworks (at the gate of the workshop and in the area where flammable materials are piled up) 15 Fire fighting scheme

7 Fire extinguishers, alarm bells, medicine boxes, eye washers/showers 16 escape directions, fire-fighting equipment and prohibited areas under the electric box.

8 Confined space of electric box and switch 17

9 Please do not connect 18 during machine maintenance.

ICTI employees must attend training programs.

Number of participants in training content project

1 factory rules and regulations and wage and working hour policies

2 Mechanical equipment maintenance safety training 9.5 Mechanical maintenance and electrician

3 Emergency training, emergency drills and training 9.6 All employees

4 security personnel training 9. 18 security

5 EHS coordinator training 10.3 EHS coordinator

6 Training on the use and protection of gas cylinders 10.27 Gas cylinder operators

7 Fire extinguisher knowledge training +00.35 All employees

8 Environmental Health and Safety Training/Education 1 1.6 All employees

9 Chemical safety training, transfer and extraction training of flammable liquids,11.1/all employees.

10 machine safety operation procedures training 1 1. 19 all employees.

1 1 routine training of locking power supply, hanging stop sign and debugging (LTI) 1 1.26 machine maintenance and electrician.

12 PPE training (personal protective equipment) 1 1.3 1 all employees.

13 Training on the use of lifting machinery 1 1.33 Lifting personnel

14 confined space training 1 1.43 confined space training

15 food preparation hygiene training catering service personnel

16 medical waste treatment and disposal emergency personnel

17 first aid knowledge training for some employees

18 new machine, new material and new energy training for all staff.

What tests are needed to apply for the acceptance test cma of the third-party software system to verify whether the system meets the requirements in the user's requirement specification (which may include the acceptance criteria of the project or product)? The test hopes to find the remaining defects as much as possible, thus providing help for further improvement and ensuring that the system or product is finally accepted by the user. It mainly includes usability test, compatibility test, installation test and documents (such as user manual and operation manual). ) test and so on. I suggest you go to a professional testing network (such as 5 1Testing testing network), which contains detailed information about acceptance testing ~

How to download and obtain third-party software for music mobile phones? Download through the mobile app store or log in to Lenovo app store official website on the PC side.

According to Article 22 of the Metrology Law of People's Republic of China (PRC), "the product quality inspection institutions that provide notarized data to the society must pass the metrological verification and test ability and reliability evaluation by the metrological administrative department at or above the provincial level in People's Republic of China (PRC)." Therefore, all product quality supervision and inspection institutions and other laboratories that provide fair data to the society must obtain Chinese metrology certification, that is, CMA certification. Then, the steps for a third-party testing organization to apply for CMA qualification are as follows:

Step 1: register the company, and different regions also have requirements for registered capital, at least 500,000 registered capital;

Step 2: After industrial and commercial registration is completed, it is necessary to purchase instruments and equipment and recruit chemical analysis engineers. The instrument must be a national standard chemical analysis instrument certified by CMC. The basic instruments are: gas chromatograph, spectrophotometer, soap film flowmeter, analytical balance, atmospheric sampler, radon detector, drying box, etc.

Step 3: The personnel need at least one senior chemical analysis engineer and several chemical analysis engineers;

The fourth step: after at least three months of trial operation, a complete laboratory management system has been established, and an application for metrological certification has been made to the Provincial Quality Supervision Bureau;

Step 5: The Certification Department of the Provincial Quality Supervision Bureau will inform you when to conduct on-site review;

Step 6: On-site audit (this is the most critical). If there are few projects applying for certification, two people are usually invited, one is the team leader in charge of quality system inspection and the other is the expert in charge of technical inspection.

Step 7: On-site audit will generally produce some unqualified items, as long as there are not too many, it is generally no problem. One is that there will be some problems more or less, and the other is to reflect the level of experts. So there will definitely be some unqualified projects;

Step 8: Rectify the unqualified items for at least one month. After the rectification is completed one month later, submit relevant written certificates to the team leader.

Step 9: Wait for the CMA measurement certificate to be issued!

According to the requirements of "Measures for Assessment of Agricultural Products Quality and Safety Testing Institutions" and "Detailed Rules for Assessment and Accreditation of Agricultural Products Quality Supervision, Inspection and Testing Institutions", the assessment criteria for assessment of agricultural products quality and safety testing institutions, assessment and accreditation of institutions and accreditation of national metrological certification food inspection institutions are 1. The general provision is 1. 1 to implement the Food Safety Law of People's Republic of China (PRC) and the Food Safety Law of People's Republic of China (PRC). The Regulations on the Implementation of the Food Safety Law of People's Republic of China (PRC), the Regulations on Certification and Accreditation of People's Republic of China (PRC) and other relevant laws and regulations regulate the accreditation and evaluation activities of food inspection institutions, and this standard is formulated according to the Administrative Measures on Accreditation of Food Inspection Institutions and the Accreditation Conditions of Food Inspection Institutions. 1.2 Within the territory of People's Republic of China (PRC), the accreditation and evaluation of food inspection institutions that issue data and results with certification function to the society shall abide by these standards. 1.3 the food inspection agency mentioned in this standard refers to an inspection agency established according to law or approved to engage in food inspection activities and issue certified inspection data and results to the society. 1.4 CNCA and people's quality and technical supervision departments of all provinces, autonomous regions and municipalities directly under the Central Government shall evaluate the basic conditions and capabilities of food inspection institutions according to this standard, and issue qualification certificates to food inspection institutions that meet the requirements of laws, administrative regulations and this standard. 1.5 The accreditation and evaluation of food inspection agencies should follow the principles of objectivity, fairness, science, accuracy, unity and standardization, which is conducive to the enjoyment of testing resources and avoids unnecessary duplication. 1.6 accreditation review of food inspection institutions (including accreditation review of comprehensive inspection institutions with food inspection capabilities) shall be conducted simultaneously in accordance with the Criteria for Accreditation of Laboratories and this standard. 2. Refer to Food Safety Law of People's Republic of China (PRC), Regulations for the Implementation of Food Safety Law of People's Republic of China (PRC), Regulations on Certification and Accreditation of People's Republic of China (PRC), Administrative Measures for Accreditation of Food Inspection Institutions, Accreditation Criteria for Laboratories and Accreditation Conditions for Food Inspection Institutions.3. Terms and Definitions This standard adopts the Administrative Measures for Accreditation of Laboratories and Inspection Institutions. Relevant terms and definitions given in General Requirements for Testing and Calibration Laboratories (GB/T 27025: 2008) and General Requirements for the Capability of Various Inspection Institutions (GB/T 18346: 200 1), as well as general laboratory terms. 4. Management Requirements 4. 1 Organization 4. 1. 1 Food inspection institutions should be legally established (registered) or relatively independent inspection institutions, and can bear legal responsibilities. 4. 1.2 A food inspection institution that is not an independent legal person shall be in charge of its legal representative or its authorized personnel. 4. 1.3 food inspection institutions shall use officially hired inspectors, and inspectors can only practice in one food inspection institution. Food inspection institutions shall not employ persons who are prohibited from engaging in food inspection by laws and regulations. 4. 1.4 The food inspection institution that conducts animal experiments shall obtain the certificate of environmental facilities for experimental animals issued by the administrative department for experimental animals at or above the provincial level; Inspection institutions that produce animals for their own use must have production licenses and quality certificates for experimental animals. 4.2 A food inspection agency shall have one or more of the following inspection capabilities: a) It shall be able to inspect the inspection items specified in the food safety standards related to a certain type or certain types of food, including physical, chemical and all microbial items, as well as the inspection of additives and nutritional fortifiers in food; B) Being able to inspect the inspection items related to one or more food additives specified in the food safety standards, including physical, chemical and all microbiological items; C) Being able to inspect the inspection items specified in the food safety standards of some or more food-related products, including physical, chemical and all microbial items; D) Inspection items that can meet the requirements of general food safety standards or relevant laws and regulations such as pollutants, pesticide residues and veterinary drug residues in food; E) Being able to identify the pathogenic factors of food safety accidents; F) Being able to conduct food safety toxicological evaluation for food safety risk assessment and administrative licensing; G) Being able to carry out other inspection activities as stipulated in the Food Safety Law. 4.3 The establishment and operation of the quality management system of food inspection institutions shall meet the requirements of this specification and laboratory qualification accreditation criteria. 4.4 Food inspection institutions shall, according to the Food Safety Law and the inspection activities carried out, formulate corresponding inspection responsibility investigation system, inspection data file management system and emergency inspection plan for food safety accidents. 4.5 The food inspection institutions entrusted by * * * with the tasks of supervision and sampling inspection, food safety risk monitoring and evaluation shall also formulate corresponding working systems. 5. Technical Requirements 5. 1 personnel 5. 1. 1 A food inspection institution shall have inspectors and technical management personnel suitable for its inspection activities. 5. 1.2 inspectors and technical managers should be familiar with the food safety law and its related laws and regulations, as well as the principles of relevant food safety standards and inspection methods, and master inspection operation skills, standard operating procedures, quality control requirements, laboratory safety and protection knowledge, measurement and data processing knowledge, etc. 5. 1.3 inspection personnel and technical management personnel shall receive training and assessment of Food Safety Law and its related laws and regulations, quality management and related professional skills, and hold training and assessment certificates. 5. 1.4 Inspectors engaged in animal experiments shall obtain the post certificates of animal experiment practitioners; Personnel engaged in special inspection items (radiation and genetic testing) shall meet the requirements of relevant laws and regulations. 5. 1.5 Personnel engaged in food inspection activities shall hold relevant certificates. The proportion of inspectors with intermediate or above (including intermediate) professional and technical titles or equivalent ability shall not be less than 30%. 5. 1.6 The technical management personnel of the food inspection institution shall be familiar with the business, have technical titles above the intermediate level in related majors or have the same ability, and have been engaged in food inspection-related work for more than 3 years. 5.2 Facilities and Environment 5.2. 1 Food inspection institutions shall have fixed inspection workplaces and working conditions such as refrigeration, data processing and analysis, information transmission facilities and equipment dedicated to food inspection activities. 5.2.2 The basic facilities and working environment of food inspection institutions shall meet the inspection methods, normal operation of instruments and equipment, preservation of technical files, sample preparation and preservation and other relevant requirements. 5.2.3 The experimental area should be separated from the non-experimental area. Adjacent areas that affect each other should be effectively isolated, and the range of areas that need to be controlled should be clearly stated. Prevent cross-contamination and ensure personal health and environmental protection. 5.2.4 Microbiological laboratories shall be equipped with biosafety cabinets, and experimental activities involving pathogenic microorganisms shall be conducted in biosafety laboratories at corresponding levels in accordance with the Regulations of the State Council on Biosafety Management of Pathogenic Microbiological Laboratories. 5.2.5 A food inspection institution that conducts animal experiments shall meet the following conditions: a) It has environmental monitoring facilities such as temperature, humidity, ventilation and lighting control; (2) Having an independent laboratory for experimental animals; C) There are disinfection and sterilization facilities suitable for carrying out animal experiment projects; (4) Having facilities for collecting and placing animal droppings and other wastes; E) There is an independent space for keeping animals of different species and different experimental projects in isolation, and isolating sick animals; F) Food inspection institutions that carry out special animal experiments such as volatile substances, radioactive substances or microorganisms should be equipped with special animal laboratories and corresponding protective facilities (including ventilation and sewage systems), which are completely isolated from conventional animal laboratories. 5.2.6 Toxicology laboratory should be equipped with storage and treatment facilities for positive reference substances that meet the requirements of environmental protection. Laboratories carrying out in vitro toxicology tests should have sufficient independent space to carry out genotoxicity experiments of microorganisms and cells respectively, and meet the relevant requirements of the state for laboratory biosafety. 5.3 The food inspection agency shall take measures to prevent the original data records and reports from being damaged, deteriorated and lost. Where computers and information technologies or automated equipment systems are used to collect, process, analyze, record, report or store test data and information materials, measures shall be taken to ensure their safety and integrity, and corresponding verification records shall be kept. 5.4 Instruments, equipment and reference materials 5.4. 1 Food inspection institutions shall be equipped with instruments and equipment, sample pretreatment devices, reference materials (reference substances) or reference bacteria (viruses) necessary for inspection activities. 5.4.2 The food inspection agency shall manage the use of instruments and equipment (including software), standard substances (reference substances) or standard bacteria (viruses) by special personnel to meet the traceability requirements. The evaluation criteria shall be implemented from 20 10 1 1+0.

What 1 funds do I need to prepare to undertake third-party software testing? This is the basis for starting. If you want to be big, you must have this foundation. If you do a big project for half a year or one year, you must pay 20% in advance. Without funds, people can't survive.

2. Qualification: If there are national standards in this field, check them. Different levels of qualifications enter different industry levels, of course, the difficulty of obtaining qualifications is also different;

3. Specification: The workflow should be standardized, and the specification documents of software testing and software engineering should be complete. If the other party conforms to CMMI, you should also provide a set of standard documents at the corresponding level;

4. personnel: as long as it is a third party, it is necessary to make money. To make money, you must contact customers. On the one hand, we should have a good relationship with customers, on the other hand, we should understand the business. So first of all, sales staff, demand personnel, scheme designers, and then testers;

5. Tools: There are many test items that need to use specific tools. These tools must be genuine, or you will regret using pirated ones one day;

6. Psychology: Be prepared for various negative results, and have confidence and determination!

If you just work for yourself or your friends, it's not so much trouble to meet one relative and friend after another. This is a nurturing relationship, but it can't be done much. If you want to be big, you must standardize, institutionalize, corporatize and collectivize.

I hope it helps you.

How to obtain the trustedinstaller permission under win8 (without using third-party software) win8 trustedinstaller permission is the highest permission in the operating system, which is one level higher than the default management permission of the system.

Sometimes it is necessary to modify or delete some system files/folders on drive C, and "Permission provided by TrustedInstaller is required to modify this file" will pop up.

By default, the highest TrustedInstaller administrative privileges are not activated. If you want to use the TrustedInstaller administrative rights to achieve the highest control and management of the computer.

The purpose of the system, then you need to activate the administrative rights of TrustedInstaller.

How to get the administrator password? You can choose to enter safe mode by pressing F8 without using third-party software, and modify it by using the NET command. The format is as follows: NET user administrator (administrator account) 123456/add.

I want to do the third-party testing of system software, and I need a qualified third-party software testing company to issue a report. I don't know which company to find. Hello!

Please refer to:

At present, the third-party independent testing institutions are only national and provincial, generally provincial software evaluation centers. However, some software testing institutions established by enterprises meet the requirements of ISO 17025 system and become national or provincial software testing centers.

Information application system engineering generally has a strong industry background, and it is best for third-party testing institutions to have the same or similar engineering testing experience in order to complete the functional testing of system engineering.

The scale of modern information application system is getting larger and larger, and the testing environment and testing tools have a decisive influence on the efficiency and effect of testing. When choosing a third-party testing organization, priority should be given to companies with perfect testing environment and advanced testing (management) tools.

The qualification and quality of testing engineers in testing institutions have a great influence on the actual work efficiency, so the third-party testing institutions with comprehensive testing engineers and mastery of testing tools should be given priority.

1. Classification of third-party test items

According to the characteristics of software, third-party software testing engineering can be divided into three types.

(1) Evaluation of system software, environment software and various tool software: This kind of software is mostly used as computer environment or "public" support software, with many types of products, large market sales and many manufacturers. The characteristic of products is that most of them have enterprise and even international product quality standards. When choosing, users want to compare and test the functions and performance of products. The evaluation of this kind of software focuses on the function, performance and characteristics of the software product.

(2) Application-oriented software system evaluation: This kind of software has strong industrial application characteristics and often requires users to sign project contracts with developers. Developers are responsible for development and users are responsible for acceptance. Similar to the traditional project construction process, it is obviously necessary to introduce the software engineering supervision mechanism. In China, the introduction of independent third-party quality evaluation and process control in software engineering management has been proved to be successful. The evaluation of this kind of software can be divided into two levels according to the user's dependence on the third party. Only comprehensive functional and performance tests are conducted for application software systems: generally, black-box tests are conducted at the software system level, and software processes are not controlled and supervised. Quality supervision and evaluation of application software system: it not only undertakes the task of 1, but also monitors the software process, and has the responsibility of primary software engineering supervision.

The third party responsible for this kind of software quality evaluation is responsible for the quality supervision of software process. It should supervise, manage and control the software process from the perspective of quality assurance from the definition of software in the process of software life cycle. The evaluation includes not only the evaluation of each stage of the software life cycle, but also the system integration and system acceptance test including module white-box testing.

(3) Evaluate and certify the CMM of the software enterprise: CMM grade certification is the evaluation of the enterprise's ability to define, manage, measure and control its software process, and it is the basis to ensure the quality of software products. Obviously, CMM certification of software enterprises is the highest level of software evaluation.

2. Environmental construction of third-party testing projects

The construction of third-party testing engineering environment includes the establishment of software evaluation sites and the provision of equipment, software and tools required for testing, evaluation and analysis. This environment includes representative operating system, supporting platform, middleware, network environment simulating distributed applications, as well as version management tools and special testing tools.