Iso 14000 What materials should be prepared for the certification of Zhongshan Leather Factory?

1. Copy of business license of enterprise as a legal person; Note: Please provide the business license consistent with the enterprise name and legal person filled in the application form; The products applied for certification are within the scope specified in the business license; Passed the annual inspection of the industrial and commercial bureau that year.

2. Copy of organization code certificate.

3. Factory plan (sketch)

4. Production process flow of products applying for certification Note: A sketch is enough, please indicate the key processes and special processes in the process, and only one copy is needed for those with similar processes.

5. Monitoring report on wastewater, waste gas and noise of production enterprises; Note: the monitoring report must be issued by the environmental monitoring department that has passed the metrological certification, and the reporting time is within one year before the application for certification; At least the conventional indicators such as pH, COD, BOD, SS and petroleum are monitored for wastewater, LAS is added for detergents, chroma is increased for water-based coatings, and PO43-is added for refrigerators and other production enterprises adopting phosphating process; Monitoring at least three indexes of SO2, soot and Ringelmann blackness of boiler exhaust gas; Noise shall be measured at no less than four points in the east, west, south and north of the factory boundary; Overseas enterprises shall issue EMAS+0400 1 certification or ISO 65438 certification and environmental label certification (if not, the compliance certificate or letter of commitment issued by the local environmental protection department shall be provided).

6. Environmental impact assessment report and "three simultaneities" acceptance report;

7. Correspondence table between the guide elements of environmental label product safeguard measures and enterprise management documents;

8. Quality, safety and hygiene standards for product implementation; Note: National standards are not required; Enterprise standards must be filed by the local technical supervision bureau.

9. Product quality/safety/hygiene inspection report. Note: Please provide the product quality/safety/hygiene inspection report issued by the product inspection agency approved by the national or provincial technical supervision department and certified by metrology within one year. The contents of the report and test indicators shall meet the product implementation standards and be qualified; Compulsory certification products should provide 3C certificates;

10. Organization chart of the enterprise

1 1. production license. Note: The production license of the industry specified in the Catalogue of Production Licenses for Industrial Products shall be submitted.