How to connect the ladder brake line of Lida Villa?

1. Check whether the voltage and frequency used by the motor match the power supply.

2. Connect the power cord to the positive and negative poles of the motor, which are shown as U, V and W. ..

3. Connect the brake line to the corresponding relay on the motor controller.

4. Connect the power cord of the brake to the power input end of the motor controller to ensure that it is isolated from the power cord at the motor end.

5. Connect the encoder and reducer cables to the motor controller.

6. Ensure that all cables are connected and fixed correctly.

7. Finally, turn on the power supply, start the motor, and adjust the parameters on the controller as needed to achieve the best effect. If there is no fault in the correct wiring, the brake should automatically brake when the power is cut off.