On the summary of electrician's job of becoming a regular worker

Electrician industry has gathered a series of important industries such as power generation, power transmission and transformation, power distribution, electrical equipment and electrical equipment manufacturing, and is one of the main pillar industries of China's equipment manufacturing industry. This article is a short summary of the electrician's job of becoming a full member for your reference only.

Electrician turned positive summary Fan Wenyi:

When I was in the power station, I had limited knowledge of equipment operation and management, but I benefited a lot from the dedication of the stationmaster and the long-term value. With full work enthusiasm, I gradually became familiar with the operation of the equipment. Although I am only a beginner, I am as enthusiastic about my work as other young people. In order to improve my knowledge and ability in my own work as soon as possible, I should study hard and take notes on the analysis and treatment of equipment defects besides doing the essential work in my own station. Give full play to my subjective initiative, I use my spare time to find relevant materials for study.

In the company's one-year period, I have met many colleagues, and I also know what "personnel" is. "Dealing with people" is a profound knowledge for both society and units. For this profound knowledge, I, a layman, can only say, "Be honest and do well!" Along the way, I participated in the maintenance and defect treatment of 35kV substation. In the process of learning from the person in charge, I deeply felt my lack of technology and the hardships of grassroots work! In order to better adapt to my work, I will further study and improve myself. Under the relaxed and harmonious working atmosphere and good learning and development opportunities in the company, I strive to consolidate my professional foundation, expand my knowledge and strive to complete my work better. Electrician's home.

In just one year, the combination of theory and practice gave me a real understanding of my work and laid the foundation for future work.

Although I have made some achievements with the help of leaders at all levels and veteran comrades, I know that I still have some shortcomings and deficiencies, mainly in the following aspects:

1, the foundation of political theory is not solid, and the combination of theory and practice needs to be further improved;

2, can seriously complete the company's work tasks, but the enthusiasm is not enough;

3. Insufficient ideological and business communication with company leaders and comrades;

My comprehensive quality and business study need to be further improved.

The past year has been a year of continuous learning and enrichment, and a year of active exploration and gradual growth. Here, I would like to thank the company leaders for their careful cultivation, my colleagues for their guidance and help in my internship, and their reminders and corrections of my mistakes in my work. I also know that graduation is only a small step in learning, and society is the real university. In the future work, I will try my best to find my own position, do my best to contribute to the company, create real wealth for the company, and at the same time seek greater progress for myself.

The electrician turned positive and summarized Fan Wener:

Time flies, and the probation period will be over one year in a blink of an eye. Looking back on my work and life in China Railway in the past year, I can't help feeling too much. I have completed the transformation from an inexperienced college student to an employee of China Railway, from being unfamiliar to being familiar with all kinds of work and business, and from consolidating academic theoretical knowledge to practical operation. I sincerely thank the leaders, masters and their colleagues for their training and selfless care, so that I can combine the theory in books with my practical work and avoid detours in my work. The first time I came to Changliang was on March 5, 20 10, when the climate was cold. As a person who has lived in the south since childhood, I have never felt the temperature of MINUS ten degrees, which is also a great challenge for my upcoming work. The outdoor working climate is bad, especially for me who has never experienced the sandstorm in the northwest. At the same time, no matter the technology, the number of personnel and the working conditions are not ideal, we all overcame the difficulties to assemble the new bridge erecting machine DJ 168 and successfully debugged it. Everything is going on in an orderly way under the scientific command of Chang Liang's leaders; In a blink of an eye, on July 6, 20 10, the probation period began. After making full preparations, the first bridge and firecrackers were successfully erected under the overall planning of leaders of various departments. Although the first erection was hard, the joy of success made us forget all the fatigue; With the increasing familiarity with the bridge erection process and the continuous improvement of bridge erection methods, the efficiency of bridge erection is also constantly improving. Today, we have successfully built a 247-span bridge, which is our pride and our glory. Looking back on these days of working and living with you, I am proud to be a member of this team. I can show my value with wisdom and hard work and contribute everything to the company. Summing up my past work and life, I have greatly improved my professional level, political accomplishment and comprehensive ability, and I have many feelings and experiences. The summary is as follows:

First, take "diligent and pragmatic, be brave in innovation" as the creed, strengthen study and improve one's own quality.

I attach importance to strengthening the study of theory and professional knowledge. At work, I insist on studying while working, and constantly improve my overall quality. When you encounter problems you don't understand at work, take the initiative to discuss with your master and colleagues and learn with an open mind. I deeply know that as a college student who has just left college, I still have a lot to learn, so I have never forgotten my identity. Seriously study business knowledge, focus on motor and electrification control management, find the key points in learning methods, grasp the key points, and combine their own shortcomings in circuit system construction and maintenance to conduct targeted learning and continuously improve their business capabilities. Combine theoretical knowledge in books with hands-on operation. Therefore, while strengthening study, we should not only use our brains, but also start work. Only by combining the two can we have excellent work performance and accurately judge and deal with the problems encountered in our work. In practical work, in order to have a better operating vision and flexible operating space, I combined my own study, with the guidance and leadership support of the master, carried out wireless control transformation on the hydraulic control of the No.3 column. Overcoming technical problems, the transformation experiment achieved staged success. The operator can control the hydraulic action anywhere within the wireless signal coverage without affecting the operation of the wired handle. But unfortunately, because there is no matching wireless control equipment that meets the operating conditions in the market, and the products used in the experiment can not meet the requirements of bridging work, the mobility and safety need to be improved, so they have to be dismantled after the test is completed. But we can't deny the success of this experiment. This transformation and innovation is of great significance to my future work, which makes me understand that innovation should be combined with reality, humanized and objective. At the same time, it also encourages me to continue to carry forward this work style and continue this innovative spirit. Keep learning and making progress, and enrich your horizons. On the premise of ensuring safety and quality, we should be brave in innovation, improve work efficiency, save manpower and material resources, and do our best to do a good job in the spirit of people-oriented.

Second, take the concept of "based on one's own position and working hard". Diligent and pragmatic, responsible for the development of the company.

Over the past year, I have been insisting on being strict with myself, working hard, always bearing in mind the purpose that the interests of the company are above everything else, and trying to do my job well in ordinary and ordinary jobs. In the concrete maintenance of mechanical and electrical equipment of bridge erecting machine, the most easily damaged power supply cables and control cables should be monitored: before entering the beam, pay attention to the distance between the front and rear vehicles when the vehicle retreats between the No.2 column and the No.3 column, so as to prevent the cables from being squeezed due to too small distance. When entering the beam, it is most likely that the reinforcement of the side beam trips and pulls the drive cable. Therefore, we should pay attention to the driving situation of the vehicle and keep in touch with the operator of the general controller so as to stop the vehicle in time and deal with it in time under the above circumstances. When dropping the beam, pay attention to the fact that the handle line of the welding machine should not be pulled and pressed by the wheel during the lateral movement. Regularly check whether the wires are damaged and make necessary protection and replacement. Check the connection of wires to ensure that they are firmly connected, so as to prevent short circuit and open circuit from damaging the machine. Check the keys, hydraulic operating handles and various control switches at any time to ensure their sensitivity and effectiveness. Replace the parts that have lost their working performance patiently and carefully to prevent the secondary damage of the circuit system. At work, I try to serve well and be a good staff assistant; Carefully collect all kinds of information, fully and accurately understand and master the development of all aspects of work, analyze the main problems existing in the work, sum up work experience, and report to the leaders in time, so that the leaders can fully and accurately understand and master the recent actual situation and make scientific and correct decisions to solve problems. At the same time, as the operator of the No.3 column, he strictly implements the working criteria in the Code for Erection of T-beams and is seriously responsible for the safety of the No.3 column in the process of bridging and transporting beams. Especially in the alignment of the through hole of the bridge erecting machine, the support pad of the No.3 column is particularly important, and it is necessary to ensure that the force is uniform and horizontal to prevent tilting. In order to increase the tail counterweight, when the No.3 column is put away and the boom is pushed, the sleepers and hard miscellaneous wood supporting the No.3 column are just fixed on the No.3 column. At the same time, it reduces the workload of employees, saves manpower waste, saves the steps of handling, and improves the efficiency of bridge construction.

3. With the goal of "safety first, ensuring production", it is no small matter to do a good job and promote the responsibility of safe production. We have taken all necessary safety measures. As an electrician, I know my responsibilities. 1. Responsible for the use of electrical equipment of the whole bridge machine. 2. Assist the girder erector in bridging operations, and be responsible for the use of electrical equipment by other operators. 3. Be responsible for the installation and maintenance of electricity in living quarters and office areas. At work, we should always keep a high degree of vigilance. In order to ensure the safety of electricity use, we should strictly abide by the relevant regulations and do not use electrical appliances illegally. In the laying and use of the line, we must treat it with a responsible attitude and not be careless. At the same time, in other operations of bridge crane, we should always pay attention to the safety of each post. Now safety is also a kind of productivity. Promote production and create more value on the premise of ensuring safety.

Looking back on my work in the past year, I have made new progress in thought, study and work, but I also fully realize that my own shortcomings need to be improved and my theoretical knowledge level is still relatively low. Summing up the past is to learn lessons from past work and do better work in the future. Please criticize the shortcomings and deficiencies in our work.

Summary of electrician becoming a full member Fan Wensan:

The days passed silently in the blink of an eye, and it was at this time that I suddenly realized that time was in a hurry when I needed to go back and summarize. Just in June this year, when the sunshine just made people feel warm, I came to work in _ _ Ironmaking Plant with excitement. Although I just started working for only a short month, it feels like a river of water, inclusive and profound. I gained a lot of organic experience and suddenly felt at home.

Looking back on June, it was an extraordinary January. When I came to work in the iron works, I applied for the position of electrician. I remember when I first arrived at the workshop, I was not used to it. The so-called strange place, unfamiliar place, but with the help and guidance of leaders and colleagues, I quickly adapted to this environment and this job. And gradually integrate into this group. Just this month, I have gained a lot and felt a lot. The following is a summary of my work:

Looking back on June, it was a difficult January. Because I had little contact with electricity before, I came here to work and study from the foundation, from the foundation. First of all, as an electrician, safety is always the most important. Safety in production is the responsibility of individuals and factories. Safety first, work second, in terms of safety, I strictly abide by the safety management rules and regulations, understand the safety work system of our factory, lay a solid foundation for safety, and ensure the safety of others while ensuring my own safety.

In terms of work and study, I learned the location of workshops and equipment, the orientation and function of each distribution room, and the distribution and function of electrical equipment everywhere, and worked hard to learn the basic knowledge of electricians, power supply system knowledge, line devices, lighting devices, grounding devices and so on. From series to parallel, from DC to AC, from simple general lighting to in-depth electrical fault finding and troubleshooting. I first came into contact with high-pressure sodium lamp, mercury lamp, ballast, contactor, starter, relay, multimeter, multi-P switch and other electronic components. At the same time, we studied their application and coherence factors, the difference and function between simple connection and disconnection methods and some motors, and the basic working sequence of power distribution cabinets. I reviewed the connection, principle and precautions of some electrical components such as ordinary light bulbs, fluorescent lamps and ordinary switches. He also went to the work site with leaders and colleagues for assistance and study many times, summed up various fault phenomena and solutions in time, and recorded them to guide practice and improve his professional level. During this month, my leaders and colleagues helped me learn a lot. They are not only my guides in life, but also my partners in work. I have benefited a lot, and my gratitude is worrying.

Although it is a short month, I have learned a lot, but I know it is not enough. Therefore, I need to continue to work hard, constantly strengthen theoretical study and strengthen the ability to solve problems in practice. With the continuous expansion, standardization and perfection of enterprises, we can expect that our work will be more arduous, the requirements will be higher and the knowledge we need to master will be wider. So I will study harder, improve my quality and skills, and adapt to the requirements of enterprise development. Here, I will constantly improve myself, make greater progress in thought, technology and work, be factory-oriented, work hard, have a strong personality, be prepared for fire fighting, and devote my infinite enthusiasm to a better tomorrow, and firmly believe that I will do better!