How to remove the pvc gusset plate? What problems should be paid attention to in the installation of PVC pinch plate?

PVC gusset plates are still widely used in home decoration. Generally speaking, PVC gusset plates are used in the bathroom ceiling and kitchen. However, after a period of use, due to various reasons, the gusset may not be used normally. At this time, it is necessary to replace the pinch plate in time. Next, Bian Xiao will tell you how to delete the PVC gusset plate. What problems should be paid attention to in the installation of PVC pinch plate?

How to remove the pvc gusset plate?

1, the overall demolition will be better.

When the original ceiling decoration is dismantled, it shall be completely dismantled, and the original ceiling decoration structure shall not be retained. In particular, the suspenders, pendants and other structures that bear the weight of the original ceiling must be removed, mainly for future safety considerations, and may also affect the later installation.

2. Circuit safety

Circuit safety is the key point to remove the suspended ceiling. When dismantling, the power supply should be cut off first, and the original circuit and pipeline in the ceiling should be demolished as much as possible. Because these circuits have no use value, it is an ideal method to completely dismantle them.

3. Protect other equipment.

When the ceiling is removed, it is very easy to touch other equipment in the house, so the safety of equipment and facilities in the ceiling should be considered when removing it. In the last century, many old houses had heating pipes on the ceiling, and some houses had air conditioning systems, which avoided the damage of ventilation pipes and flues.

Step 4 pay attention to safety

Individuals engaged in ceiling removal must wear safety helmets to avoid falling and damaging the ceiling. At the same time, the internal light steel keel will be cut off when the ceiling is removed, so it is necessary to avoid hand injuries and wear gloves to operate. The removed ceiling must be pushed open to avoid dumping and hurting people.

What problems should be paid attention to in the installation of PVC pinch plate?

1. After the wall tiles of the kitchen and bathroom are pasted, you can tell the personnel of the pinch plate manufacturer to make home measurements.

2. The electric water heater \ gas water heater device is in place, and the power cord for lighting and exhaust should be reserved.

3. Buy Yuba \ exhaust fan (integrated ceiling is not required) \ range hood before installing the ceiling, and take it to the site. The opening direction of the smoke pipe of the range hood is determined by the cabinet manufacturer.

4, ceiling lamp, if it is embedded, you should also buy it and take it to the scene, which is generally unnecessary.

5. Please determine the installation direction of the above-mentioned electrical appliances, so that the installation workers can open holes.

6. At present, the upper edge of most balcony/kitchen/bathroom windows is lower than the ceiling. Please ask the ceiling installers to prepare blockboard (or kitchen cabinet board) to seal these parts.

If the PVC ceiling profile is damaged, it is very convenient to replace it. Just remove the batten at one end, pull out the boards from the batten piece by piece, replace the damaged boards with new ones, then reinstall them and press the batten. When replacing, pay attention to the color consistency between the new board and the old board, and there can be no color difference.

Through the introduction of the above article, how did you remove the pvc gusset plate? What problems should be paid attention to in the installation of PVC pinch plate? I think I understand very clearly. It is not difficult to take off the PVC gusset plate. Generally speaking, if you know how to install it, you know how to uninstall it. However, the PVC gusset plate must not be forcibly disassembled with hard objects, otherwise the PVC gusset plate will not be used normally.