Is it easy to drill furniture rows?

Easy to fight.

1. Installation requirements for woodworking row drill bits: 1. The equipment is in good condition, the spindle has no deformation, no diameter jump, the installation is firm and fixed, and there is no vibration, etc. 2. Check whether the saw blade is damaged, whether the tooth shape is complete, whether the saw plate is smooth and smooth, and whether there are any other abnormalities to ensure safe use. 3. When assembling, make sure the arrow direction of the saw blade is consistent with the rotation direction of the equipment spindle. 4. When installing the saw blade, keep the axis, chuck and flange clean. The inner diameter of the flange should be consistent with the inner diameter of the saw blade. Ensure that the flange and the saw blade are tightly combined. Install the positioning pin and tighten the nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade. 5. Before starting the equipment, ensure that there is a single person operating the equipment, jog idling, and check whether the steering of the equipment is optimal. Check whether there is any vibration. After installing the saw blade, let it idle for a few minutes. If there is no slipping, swinging or jumping, it will work normally. 2. Selection and operation requirements for the use of woodworking drill bits: 1. The drill bit is designed for professional woodworking drill bits. Pay attention to the rotation direction of the drill bit. 2. The drill bit can drill and mill standard and smooth inner holes in various synthetic boards and solid wood, but avoid cutting non-wood materials such as metal, sand and gravel. 3. Try to use a drill bit of standard length, and press the wood tightly during the operation to prevent the processed product from being unqualified or the drill bit being deformed. 4. It is also necessary to use a standard jacket. If it is worn or has a taper in the inner hole, insufficient clamping force will cause the drill bit to fly off and vibrate, resulting in unqualified products. 3. Calculation formula for drilling rows of woodworking drill bits: The calculation formula for hole positions is: (a-32x)/2 rows of more than 3 holes and then 32x/(n-1) in the middle of 2 rows of 3 holes or more. a is the length of the punched plate and X is the personal drilling habit. Which one is determined is not fixed. n is the number of holes that need to be arranged. For example, a 1000-length wooden board with 2 holes is 1000-35*25)/2=100. The distance between the two holes is 32*25=800. The drilling depth of Jihe Youju If it is too deep, it is easy to cause poor cutting. 57mm length drilling depth: less than 10mm (including 10mm), no more than 20mm; 11mm - 14mm, no more than 26mm; more than 15mm (including 15mm) split drill, no more than 23mm70mm length drilling depth: less than 10mm (including 10mm), no more than 26mm11mm-14mm, no more than 35mm15mm (including 15mm) split drill, no more than 35mm. 4. The positioning of woodworking drill bits in different CNCs is also different. Different CNC drill bits have different results in using positioning rings. Some can be used and some cannot be used. If the positioning ring is used, the correct installation depth must be ensured. If you do not use a positioning ring, you must pay attention to the elongation of the carbide woodworking multi-row drill when it is installed on the spindle. The elongation must be consistent and correct during adjustment, and you must pay more attention to the multi-axis row drilling machine. Row drill bits are used for drilling holes, mainly for accurate hole spacing. Generally, there are 12 drill bits in a row, and the drill bit spacing is 32mm, which is called the 32mm system. For example, if you want to drill five holes on a board with different spacing, if you change the board and drill five holes with the same spacing, the hole spacing will be very accurate. The drill row used on the drill row has 21 holes in one drill row. The standard hole spacing of the drill holes is 32MM. There is a long ruler at the head of the drill row with a scale and a positioning cylinder. As long as the calculation Make a good mark at the beginning, then find a reasonable position according to the distance you want to drill, and set the position so that you can drill holes in batches.