Matters needing attention in Kunshan waterproof decoration

Waterproof decoration is an important part of house decoration in Kunshan. Waterproof decoration is a hidden project, so we must consider it clearly before decorating the house, so as to avoid problems in our future life and affect the decoration effect. Then, what points should be paid attention to in Kunshan housing decoration? Let Bian Xiao introduce it in detail to help you better carry out waterproof decoration.

Main contents of Kunshan waterproof decoration:

First, prevent leakage.

The so-called leakage prevention is to prevent leakage outside the room. If the hidden danger of leakage comes from windows and balconies, the reason is that the waterproof and leak-proof technology of aluminum alloy doors and windows is not up to standard or unqualified, resulting in leakage every time it rains. If no other changes are made during the renovation, remedial measures must be taken. The specific method is to install the windowsill separately, supplement the waterproof and leakproof agent, dig out the original waterproof glue in the outdoor part and reinstall the waterproof glue.

Second, the bathroom and kitchen leakage prevention.

The reason for leakage is that waterproofing is not done well. The methods to prevent leakage are:

1. Before renovation, carefully check whether there is water leakage in the kitchen and bathroom on the first floor upstairs. If so, the waterproof work upstairs should be completed before the decoration. If there is no one living upstairs for the time being, or for other reasons, the waterproof project upstairs can't be handled for the time being, then measures should be taken to remedy it: the bottom of the leakage part should be painted with polyurethane, but the plastering layer of the leakage part should be handled well and the base should be kept dry.

2. When decorating the kitchen and bathroom, if the original wall and floor tiles are knocked out for renovation, the waterproof layer should be redone and then the wall and floor tiles should be pasted again. The waterproof layer of the surrounding side wall is 200mm high, and there is a bathtub. The waterproof layer at the top of the bathtub is more than 200mm. When there is a shower and there are no other waterproof measures, the waterproof layer should be sprayed to all parts by the shower.

3. Waterproof treatment in kitchen and bathroom decoration: If the waterproof layer was not made originally, add it according to the above method; The original waterproof layer has been completed. Please carefully check whether the waterproof layer is in place and damaged, otherwise it will be repaired. After the repair, water injection test should be carried out, and the qualified standard is that the downstairs and surrounding walls are free from leakage and moisture.

4, kitchen, bathroom and other wet parts after the completion of the decoration, the ground elevation should be lower than the hallway or corridor. Stone that is not afraid of water should be installed at the door of kitchen and bathroom, and its roots should be waterproof to prevent water from infiltrating into the hall from the door.

5. Pay special attention to the threshold between the bathroom, kitchen and aisle. Before installation, the marble doorsill should be filled with cement, and then the doorsill door should be put after it is completely dried. This can effectively block and isolate the running water that cleans the bathroom and kitchen every day, and effectively achieve waterproof and leak-proof effects.

Matters needing attention in Kunshan waterproof decoration:

When doing waterproof construction, the first step is to do a good job of grassroots treatment. Remove the original decorative materials, clean up the eluvial soil and cement, and require the surface to be flat and dry.

Step 2: Spread waterproof coating. Brush a layer of modified asphalt on the waterproof base, spread a layer of glass fiber cloth, brush it again, and finally brush paint on the second layer of glass fiber cloth to finish the waterproof treatment. Waterproof coating should be painted evenly, glass fiber cloth and waterproof layer should be closely combined, and there should be no brush leakage, bulging and falling off, otherwise the waterproof effect will be affected. If polyurethane is chosen as waterproof coating, it is generally unnecessary to add glass fiber cloth, and it can be brushed for 2-3 times repeatedly. Because the polyurethane coating itself can form an elastic protective film, it has certain tensile properties. In order to improve the waterproof effect, a layer of glass fiber cloth can be laid, but the cost will increase.

It should be noted that when the ground is waterproof, waterproof coating and glass fiber cloth should be laid on the wall 20-30cm away from the ground to prevent leakage at the joint between the wall and the ground, and form a closed and firm overall waterproof layer. For shower wall, soft wall and indoor wall that are afraid of leakage, waterproof coating should be painted at 1.8 meters or all the walls to prevent wall leakage.

Step 3: Do the "water resistance" test, which is an important means to test the indoor waterproof quality. After the waterproof project is completed, seal the door and drain, and fill the room with water to a certain level. If the liquid level does not drop significantly within 24 hours, it is qualified. ? After the "water retaining" test is completed, cement mortar protective layer should be made on the waterproof coating, and care should be taken not to destroy the waterproof coating. After the cement mortar protective layer is dry, it can be decorated normally by laying wall bricks or painting.

More about Kunshan Waterproof Decoration Design? Please go to Kunshan Decoration Network!

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~