Work Summary of Safety Technology Department of the Company in 2022

As time goes by, we will have a new job. We need to sum up the work at this stage. Summary is a written material to evaluate and describe the achievements, existing problems and experiences. I specially collected and sorted out the work summary of the company's safety technology department in 2022 for your reference only, hoping to provide you with reference!

In 2022, the safety technology department of the company summarized the model essay (1). In 20xx, under the correct leadership of the company and the project department, under the correct guidance of the owner's supervision, and with the joint efforts of the project safety department and all the staff of the project, the overall situation of construction safety in our project remained good. As of February 8, 20xx65438+20xx, no safety accident occurred.

In the past six months, the project department has done a lot of effective work, focused on key points and strengthened research, successfully completed various tasks of construction safety management and achieved fruitful results. Now, the summary of the construction safety work of our house building project and the 20xx construction safety work plan are reported as follows:

I. Summary of work

1. Over the past six months, the Project Safety Department has strengthened data management and formulated various construction safety plans, including special safety plans, to ensure the orderly progress of construction safety work. At the same time, the security department strengthened the entrance education for the personnel entering the site, and effectively realized the development rate of safety education and safety technical disclosure for the personnel entering the site 100%.

2. The housing construction project always adheres to the safety production policy of safety first, prevention first and comprehensive management, completes the identification of dangerous sources on the construction site, formulates relevant measures, strengthens the management of dangerous sources, and prevents accidents.

3. The project department and the construction unit regularly organize joint inspection of the living quarters and the construction site, and the project department actively rectifies the found safety problems to ensure the construction safety.

4. The fire pool was dug in the construction site, surrounded by fire hydrants and equipped with enough fire extinguishers. The project department also organized fire drills and electric shock drills, which quickly improved the safety awareness and emergency response ability of all employees in the project department.

5. The security department participates in the acceptance of the machinery entering the site, and the unqualified machinery is removed from the site to ensure the safety of the construction machinery.

6. In the aspect of temporary electricity consumption management, according to the requirements of Technical Specification for Temporary Electricity Consumption Safety in Construction Sites (JGJ46—20xx), the construction organization design of temporary electricity consumption is compiled, and relevant management documents and files are established. Adopt three-phase five-wire zero protection system, strictly implement the regulation of "one machine, one brake, one box leaking", and protect the fixed secondary and tertiary distribution boxes from rain and smashing. In addition, electricians should make inspection records. In addition to checking the air interface leakage protection once a month, the air interface leakage protection should also be checked in rainy and snowy days and the grounding connection should be tested.

7. Construction projects always take the creation of "safe and civilized construction site and green construction model site" as the primary goal of safety production management. In order to achieve this goal, with the effective assistance of other departments, the security department has set up smoking rooms, carpentry sheds, steel processing sheds and other facilities to strengthen safety management and do a good job in green, safe and civilized construction. Through the joint efforts of the company and all the staff of the project department, the Yuantaizi toll station project was awarded the title of "Highlight Project".

Second, the work plan:

1 20xx has a large amount of work, many operating points, a wide area, scattered operators and frequent crossover operations. The security department should first do a good job in admission education to ensure that the safety education and safety technical disclosure rate is 100%. At the same time, there are many on-site construction procedures, so safety management personnel should increase the inspection of the construction site and strengthen safety management to ensure construction safety.

2, do a good job of acceptance of mechanical equipment, to ensure the safety of mechanical work and equipment running in good condition; Do a good job of comprehensive inspection and concealment of limb and hole protection to prevent people and objects from falling;

3. Strengthen fire safety education for operators, strengthen safety awareness, implement construction safety measures for dangerous operations, and establish a strict management system for flammable, explosive and toxic substances on the construction site to prevent poisoning accidents and ensure construction fire safety.

In the future work, we will continue to strengthen on-site safety management and actively study.

Laws, regulations and all kinds of standards and norms, innovate safety management methods, methods and measures, combine with the actual safety production, increase the advance of safety management, implement strict target management responsibility system, continuously improve the level of safety management, and ensure the safety of construction site. The management work is progressing smoothly.

Work Summary of Safety Technology Department of the Company in 2022 (II) 1. In strengthening safety education:

There are 66 new employees in the factory every year, and 15 people are on sick leave and reinstated. Carry out standardized education according to the classified education of factory 10, the contents of hazard identification and on-site practical education. Familiar with the department's safety production rules and regulations, risks in the workplace, preventive measures and accident emergency cases. , due to mount guard work, organize each team to learn safety documents. Organize all employees of our factory to carry out safety education before the National Day, watch accident case videos, with more than 200 participants, and organize 396 people to take the pre-holiday education safety operation procedures examination and sampling examination of the Ministry of Security, with 52 people. Safety production responsibility system test and sampling test 52 people. In March, more than 40 people from crown block were organized to participate in the company's professional education and training. In April, Zhang Youliang organized more than 60 factory supervisors to study accident cases and train the working methods of safety teams for many years. In May, the activity of "five people and one person seeking safety" was carried out, and 37 command gestures of blasting vehicles were drawn, and * * * 18 people grasped the situation. In the first half of the year, all 34 new employees received secondary and tertiary safety education and training. On June+10, 5438, 62 people above the monitor of our factory were organized for safety training, and experiments were conducted during the power outage. Safety foundation.

Second, the investigation of security risks:

Safety inspection is an important means to do a good job in safety production. Its basic task is to stop "three violations" and supervise the discovery, clarification and improvement of various dangers and dangers. Continue to carry out on-site safety inspection and rectification, and ensure that 48 on-site inspections are organized every year according to the safe production conditions of the factory, and the hidden dangers of 3 12 are investigated throughout the year, and rectification notices are issued. * * * More than 45 people were examined/kloc-0, and 98% of them were rectified. There is no big risk in maintaining different factories. Traffic fire control should strengthen the education and publicity of fire prevention and road traffic safety, and the whole factory should accept the fire prevention and road traffic safety test, and strengthen the management and rectification of key fire prevention areas, underground hydraulic stations, electrical rooms and heating furnaces. There is no annual fire accident or traffic accident in the factory. In February, the factory made a fire prevention and traffic safety plan, learned to transmit the "four abilities" of fire fighting, and investigated more than 50 people. In June, when the 14 fire placard was hung, the factory made an emergency plan for flood control. Hold a safety meeting on time before the Mid-Autumn Festival in September, and timely convey all kinds of documents and requirements of the company's safety. According to the document requirements of the company's security department, I made a 100-day safety activity plan for the rolling mill and distributed it to all operating areas, requiring everyone to know and every employee to know the contents of the plan. 65438+ 10 month, the factory director led troops to conduct a large-scale investigation of pre-holiday safety hazards, and urged all operating areas to immediately rectify the identified hazards. 1 1 June, organized and participated in occupational health, fire prevention, explosion prevention and fire traffic safety activities of the Ministry of Security. * * * 309 people made a special inspection on the fire extinguishers in the factory, and found that the problems were improved.

Third, in terms of safety inspection:

More than ten dimensional inspections were carried out throughout the year, and safety inspection plans were made respectively. Especially in May, most of the heating furnace gas pipelines were repaired and replaced, and the rolling mills were inspected. * * * A five-person team will sign a safety and environmental protection agreement, the inspectors will guarantee each other, and the safety responsible personnel will monitor the site and make a trial operation plan. According to the requirements of the Ministry of Security, in April 38+10, the safety work plan and implementation plan during the shutdown of our factory were formulated.

Four, heatstroke prevention and flood control work:

In May, the branch factory received heatstroke prevention drugs and food, and immediately distributed 12 barrels of drinks to employees. The factory purchased 10 electric fans and freezers in high-temperature workplaces, and supplied 100 packs of ice cubes every day in summer. In addition, in the inspection in June, 200 flood control bags, 6 flood control pumps, 6 fire belts and 20 shovels were set up to prepare for flood control.

Five, in terms of safety month:

In order to improve the awareness of safety production in our rolling mill, according to the requirements of the ninth "Safety Production Month" and the actual situation of our rolling mill, the "Safety Production Month" was launched in 20xx. The details are as follows: On June 1 day, the mill produced two publicity banners and a 14 publicity column. On June 6th, create a propaganda atmosphere and hold a "Safe Production Month" employee speech contest; On June 9th, the safety signs of all factories were signed; On June 2nd, 12, an open letter to employees and their families of rolling mills was issued; And participated in the "Safe Production Month" employee speech contest on June 6th, 2006/KLOC-0. On June 9, 20 employees were organized to observe the power plant fire emergency rescue training, and on June 22, 20 employees were organized to take the safety production examination organized by the company. On June 28th, 57 supervisors and above were organized to participate in the company's monthly safety training.

2022 Work Summary of the Safety Technology Department of the Company (III) In March of 20xx, I was transferred from Shanghai * * Project to Shanghai * * Project, and now I am an assistant to Shanghai * * Project Manager, mainly responsible for safety management. In this year of working in the * * project, I feel that the work pressure is greater than any previous year, and my work performance is mixed.

As far as the overall environment is concerned, the company and the project have significantly improved their understanding of safe production and civilized construction, especially in the special environment of Shanghai. Shanghai is a city that pays little attention to quality and only pays attention to civilized construction. Safety inspection runs through every inspection, and safety management is important. The second highest inspection frequency and harsh requirements led to unanimous resistance from all subcontracting teams. Similarly, the rectification instructions issued by the safety inspection are almost always carried out by the project safety department. Due to social complaints, owners, construction parties, supervisors and safety supervision stations, there are countless rectification projects, including Hai * Company itself. The Project Safety Production Department actually holds the C certificate, and I am the only safety officer who has actually worked in safety. Others are undocumented newcomers who have been unemployed for a long time or have been exposed to safety work for less than 3 or 4 months for the first time. Newcomers do their best in their work, but they are not mature in writing and on-site management. Shanghai didn't give them time to study and exercise on this project. At the same time, due to various reasons of the imported subcontracting team, the subcontracting team is self-righteous, openly threatening to refuse to accept project management, and even deliberately creating contradictions. In view of the above reasons, it has caused unprecedented difficulties to the safety work of the project.

The difficulty of project safety management is well known. The achievement of our project is only to establish the most standardized safety system of the whole company, and pass the certification of "Shanghai No.1 Certification Center" in Shanghai, and the on-site management has also been criticized by previous inspections. So the results are meaningless, so this year's work summary will not be reported in writing.

First, the project site inspection

Project safety inspection can be roughly divided into: (calculated from March 20xx)

1, the owner carries out regular inspection every month (* investment) (10 times) and comprehensive inspection every quarter (4 times).

2. The monthly inspection of agency construction is once a month, totally 9 times.

3, safety supervision station 3 times (start, midway, review once each).

4. The resident supervision team is weekly. Because the steering group failed to persist, the total number of times was about 10.

5. Monthly report of the project department (9 times) and special issue of holidays (Olympics, 11th, hoisting, May Day, typhoon, fire prevention, scaffolding; At least 7 times).

6.* * The security department of the company conducted internal audit/kloc-0 twice, which took 3 days.

7, bureau leadership 3 times

8. China * * internal audit 1 time took 2 days, and external audit was prepared in June 5438+February.

9. Audit of security system at home and abroad 1 time.

Preliminary statistics ***58 times. (Monthly and quarterly comprehensive inspection statistics are once)

20xx March to 20xx February, 12, 12, all kinds of rectification items are:

The accurate statistics of various rectifications are: 808 items. (available)

Among them, 777 items were rectified. Item 3 1 has not been rectified.

On average, there are 10 1 rectification items issued and implemented every month.

Cause analysis:

Reasons for inadequate rectification: The main reason for each rectification is that the on-site management personnel have poor professional skills and don't know how to rectify, that is, they are afraid of difficulties, resist and don't cooperate with subcontracting.

Since Shanghai's rectification requirements are all answered within a limited time, all rectification matters are implemented by the safety supervision department. Even most of them are self-examination and self-correction by the Ministry of Security. Therefore, the project safety officer can't focus on the safety monitoring of the construction site, and it is almost impossible for the construction site not to have an accident because of this vicious circle. In other words, the security officer's work is transferred from the scene to the office to forge information and rectify the reply, which in itself is a major security risk.

Second, the project safety education

Our project has always attached importance to safety education. In addition to a lot of education and training arranged by the project department itself, a "migrant school" was established at the request of the owner. The course arrangement is all video materials collected by the project safety production department and written materials written by itself. In order to strengthen the training effect, the project safety production department personally purchased notebook computers, external speakers and white screen cloth; The projector is the public property of the project. The form of teaching is to watch videos and comment.

It is recorded (not including the temporary special oral education conducted in the canteen of the work area for 3 times, totaling about 3 hours) that there are 24 class hours of staff education, migrant workers' schools and training.

Third, the safety work conference.

10 When the project safety production department officially started in March, a safety meeting was held once a month and training was conducted once a week. However, due to too many meetings, in recent months, in order to save time and improve efficiency, it was held at the same time as the weekly construction meeting.

Accumulated safety regular meetings (meetings) (including 20 regular meetings, special meetings and temporary meetings since August) shall be held at least 4 1 time. Among them, about two meetings were not held because they were merged by other meetings.

Fourth, the difficulties encountered at present.

1, rectification is difficult to implement.

The main apparent reason for poor civilized construction is that the builder "set up a stall" and the security officer "closed the stall". Turn a blind eye, regardless of whether to ask, is the internal reason.

2, the construction team refused to accept management, open conflict.

No matter how capable the project manager is, he doesn't want to encounter this situation.

3, check more, difficult to implement, resulting in the psychological burden of project safety personnel.

Almost all the security officers with professional qualifications recruited by the company resigned, including two in the Shanghai project. These two are my immediate safety officers, and I know their psychological state very well. Specific analysis, before this, they all suffered long-term losses in other projects, and the company's various "improved treatment" documents, including holidays and lover transfer, were not well implemented, which led to disappointment with the company. Coupled with Shanghai's high-handed policy, it caused a psychological collapse.

4, professional knowledge, management skills training is less, and more than a mere formality.

Most project safety officers are "self-taught". With the increasing number of large-scale machinery and special machinery on the construction site and the high-tech development trend of construction technology, the knowledge of safety personnel has been unable to adapt. For example, the ultra-high gantry crane was built without finding hidden dangers in the foundation in advance.

5. Lack of talent pool

A security officer can't do it just by arresting people. People who lack knowledge, understand management, can bear hardships and are willing to do safety work. I'm afraid there are no more than three employees doing safety work in almost every project.

Verb (abbreviation of verb) comments and suggestions on safety management

1, the company issued clear language and mandatory duty documents, and designated clear departments and personnel to carry out safety work. In order to get rid of the trouble of safety personnel rectification, concentrate on on site monitoring.

2, the company to strengthen the direct control of engineering subcontracting (especially powerful subcontractors). Listen to the opinions of the project manager, and tend to attack the purpose of not being a subcontractor, so as to avoid the out-of-control safety management caused by management.

3. The company builds its own internal safety management channel, similar to CFO system, which guides the psychology and work of the safety management personnel of the unit, helps us to "self-study" the safety backbone, and reduces the psychological pressure outside work.

4. In view of the special technologies such as double-deck overhead railway, tunnel and special machinery in various projects of the company, organize the compilation of targeted teaching materials, distribute them to the project safety department for study, and organize observation conditionally. Try to reduce the passive situation of "making mistakes first and then rectifying".

5. For talent reserve companies, it is advisable to openly recruit "full-time safety administrators", including external personnel with certain academic qualifications or management experience, with the regular employees of the unit as the main line (in order to avoid the frequent job-hopping of temporary personnel). As a reserve talent, you can directly enter the project safety management with the certificate to avoid rushing to fill the vacancy with "three unknown" safety personnel.

In 2022, the safety technology department of the company summarized the model essay (Chapter IV) 1. All workshops carry out self-inspection and self-correction activities, make safety self-inspection records every day, find hidden dangers and actively implement rectification. On June 20th, the rationalization proposal for further improvement of the workshop was summarized and submitted to the security department. Through the activities, the Ministry of Safety received 44 rationalization proposals, and the Ministry of Safety has studied the rectification measures in combination with the workshop, and has arranged relevant responsible units to gradually implement the rectification.

2. According to the actual situation of the workshop, the safety department makes a common safety knowledge question bank, publicizes it to the whole company through QQ group platform, encourages everyone to read and learn more, then organizes on-site safety knowledge sampling, and rewards a bottle of toilet water to the employees who answer correctly. A total of 349 people were asked in this activity, and 309 people answered correctly. Through this activity, the employees have improved their interest in learning safety knowledge and mastered common safety knowledge, which has played a good learning effect.

3. The Department of Security organizes on-site safety personnel to conduct centralized inspections every day to screen potential safety hazards at the site. At the same time, on June 12, led by the leaders in charge, the engineering department, production department and office were organized to conduct joint inspection on the production site. Through various safety inspection activities, 45 potential safety hazards were found, of which 12 was reported to the company leaders for supervision, 33 were rectified, and the rest were 65,438.

Summary of the work of the company's security technology department in 2022 (Chapter 5) I. Publicity and launching stage.

1. In order to vigorously publicize the contents and safety knowledge of Safety Month activities, the Joint Comprehensive Office of the Ministry of Security has formulated eight safety publicity banners and hung them in a prominent position in the company.

2. The Department of Safety takes advantage of the time of the morning meeting of the workshop to go deep into the front line to publicize the safety month activities to employees, and at the same time remind employees to observe the rules and discipline, pay attention to safety and avoid all kinds of safety accidents.

3. Organize managers above the monitor, hold a special training meeting on safety month, focus on training common safety knowledge, and organize managers' examinations.

4, using fetion platform, send safety knowledge messages to all managers, improve everyone's safety awareness, improve safety quality.

Second, the stage of introspection and questioning.

1. All workshops should carry out self-inspection and self-correction activities, make safety self-inspection records every day, find hidden dangers, actively implement rectification, and submit reasonable suggestions for further improvement of workshops to the Safety Production Department before June 20. Through the activities, the Ministry of Safety received 44 rationalization proposals, and the Ministry of Safety has studied the rectification measures in combination with the workshop, and has arranged relevant responsible units to gradually implement the rectification.

2. According to the actual situation of the workshop, the safety department makes a common safety knowledge question bank, publicizes it to the whole company through QQ group platform, encourages everyone to read and learn more, then organizes on-site safety knowledge sampling, and rewards a bottle of toilet water to the employees who answer correctly. A total of 349 people were asked in this activity, and 309 people answered correctly. Through this activity, the employees have improved their interest in learning safety knowledge and mastered common safety knowledge, which has played a good learning effect.

3. The Department of Security organizes on-site safety personnel to conduct centralized inspections every day to screen potential safety hazards at the site. At the same time, on June 12, led by the leaders in charge, the engineering department, production department and office were organized to conduct joint inspection on the production site. Through various safety inspection activities, 45 potential safety hazards were found, of which 12 was reported to the company leaders for supervision, 33 were rectified, and the rest were 65,438.

Third, the exercise implementation stage.

1. In order to improve the safety alert psychology of employees and ensure that "the safety alarm is always ringing, and everyone should pay attention to safety", on June 20th, the Ministry of Safety organized the emergency management team of the company to conduct the "20__ _ Year Wanyang Green Energy Electric Fire Emergency Drill" in charging workshop A, and invited relevant leaders of Li Si Town Government to observe and guide on the spot. Through this drill, a vivid fire emergency rescue education performance was displayed for all employees of the company, which improved the safety awareness of all employees and the audience also learned common fire knowledge.

2. Actively responding to the government's call, making extensive use of social resources, and jointly with Li Si Town Government, held a prize-winning question-and-answer activity on safety knowledge in Tangdi Square and Li Si Town Cultural Square on June _ _ and 18, aiming at raising people's safety awareness and making people understand and support safety. It has gained the trust and support of the society for enterprise safety.

3. Distribute a Letter to Employees' Families to all employees, ask them to take it home, let employees' families know the company's safety requirements, and remind employees to pay attention to safety at all times and do a good job in safety protection. This activity also promoted the understanding and support of employees and their families for safety work.