Job Recruitment Website - Zhaopincom - Xi Anxinjie Decoration Chengdu Liang Qing Decoration and Installation Louvre Curtains

Xi Anxinjie Decoration Chengdu Liang Qing Decoration and Installation Louvre Curtains

The installation of blinds is very practical, not only can block the light, but also has good concealment.

You need to know the installation skills of blinds and install them yourself without help.

Tip 1: Measure the width of the outer frame from left to right. The width of the top, middle and bottom of the window is the appropriate width of the outer frame.

Measure the height of window frame from top to bottom. The maximum size of the left, middle and right of the window is the appropriate height of the window frame.

Tip 2: Measure the size of the inner frame, which is the same as the size of the outer frame. First, make sure that the window is deep enough for the louver blades to move freely.

For different installation methods, the required window depth is also different: 8cm depth is required for fixed or plane installation; During push-pull installation, in addition to the width of product blades, the number of product layers to be installed should also be considered. Usually two layers push and pull, the blade movement needs 15cm depth, and the single fan needs 10cm depth. The depth of 10cm shall be reserved during folding installation.

Tip 3: Repair and install the same product. All installations need to be in a straight line. If there is a curtain box, the section width of the curtain box should be greater than 90cm.

Don't forget to push the mounting rail to the bottom, then push the shutter and rotate it.

If you want to put away the horizontal and vertical blinds, you must first turn the blades perpendicular to the wall and then pull them up. If you want to stop halfway or finally, you need to turn the drawstring 45 to the right, so that the whole curtain will be fastened automatically.