Mastercam9. 1 How to do a good job in the program of mold modification, take less empty tools, such as cim software surface ditching, the choice of mold embryo, and adding

1. You can first program the original die blank to the existing appearance of the die through rough machining, and then save the results in STL format for later use after solid simulation (this is similar to CIM, except that CIM does not need to save through special conversion format).

2. Create 3D drawings of existing molds directly with solid modeling tools and save them as STL files for later use.

Using STL file, you can select the mold blank from the file when simulating the solid.

As for taking less empty tools, I think it is a serious injury of Mastecam surface programming. This work is well done and easy to use. CIM is also better than Mastercam. Personal opinion, welcome to clap bricks. And I have been doing numerical control for many years, and I have never used mastercamX or above. I hope to strengthen this aspect.

Mastecam can use 2D tool path as much as possible, and it takes some time to program, but the machining efficiency will be much higher.

As the name implies, the machined surface is the surface you want to machine. My Chinese is taught by my math teacher. I really don't know how to express it, haha; The interference surface is the surface you don't want to hurt. Different machining margins can be set for the machined surface and the interference surface.

I hope it helps you. Have a nice day at work.