How long is the half circle of Texas Kesan Line A?

During the inspection, the station heard the instruction outside the driver's seat: Please start to check the car body door when you are ready. Touch the right rear radar, flash twice to get off, take a photo in front, touch the left front radar sensor, and say to the examiner: report that the car body inspection is completed.

Ask the examiner to give instructions to get on the bus, fasten the seat belt, turn on the light, touch the light to confirm that it is a low beam light, and tell the examiner to report to the examiner and start the simulated lighting test when ready.

1. Turn on the headlights

2. Driving at night, no street lights, poor lighting (high beam)

3. Pass the crosswalk at night (near beam)

4. Go uphill at night (flash three times)

5. Temporary roadside parking

6. Turn off all the lights

The first half of line 1

1. Change lanes first (turn left)

2. Turn around (cross the zebra crossing and hit the steering wheel) and take the middle lane.

overtake

4. Go straight at the crossroads

5. After crossing the intersection, all routes must change lanes to the right at the intersection after passing through the examination room (teaching signs are not allowed on the examination section), and prepare to change lanes at the right lane.

turn right

7. Meet a car (step on the brakes)

8. Turn left (golden road) (stop at the red light)

9. Drive in a straight line

10. Go straight at the intersection (step on the brakes twice, when crossing the zebra crossing)

1 1. School area (brake)

12. Bus stop

13. Go straight at the intersection (brake twice) and pull over after the intersection.

14. Pull over (the line in the flower bed, the door handle is close to the white line).