How to install the sliding door firmly? I wouldn't have known if I hadn't seen the master do this.

In our renovation, some friends will think that the original the balcony sliding door is ugly, so they will tear it down or replace it with one they like. Some friends will keep it. After all, the quality of the sliding door installed by the developer is still ok, and it will be wasted if it is demolished. Of course, in order to better protect the balcony sliding door, many friends will first remove the sliding door and install it later, thus avoiding the secondary damage of the sliding door. So how to install the sliding door firmly? I wouldn't have known if I hadn't seen the master do this.

We can see from the scene of the owner's home that although the sliding door was not removed, it was reinstalled in other locations.

In fact, this is also a wasteful practice. From the installation process of the master, I believe careful friends have seen the difference. When the sliding door is fixed, the master installs some small iron sheets at different distances around the door frame, and then drives the expansion screws into the wall through the holes in the small iron sheets. In this way, the door frame will be installed very firmly. It is no exaggeration to say that even if you want to remove it, it is not that easy. Later, according to the master, the reason for this is that after this kind of sliding door is dismantled once, all the connectors will loosen a lot. And sliding doors like this are generally heavy. If the track of the door frame is not fixed properly, it will be loose when used later, or there will be a gap between the door frame and the wall. So only in this way can the door frame be fixed better.

Although the installation will be a little troublesome, there are still many benefits. Xiaoshi said: So when you are decorating, if this is the case at home, you can learn from it when you install it. It should also be noted that after the expansion screw is laid, it is best to fix the joint with cement, and it is not recommended to use foaming agent to fill the joint. Because the adsorption of foaming agent is far less than that of cement.