Which is better, the manipulator of cup-making machine or the manipulator of plastic suction machine?

The manipulator of the cup-making machine and the manipulator of the plastic suction machine are actually the same thing, which is mainly used for taking out, palletizing and measuring the products of the cup-making machine and the cup-beating machine. Because the production cycle of cup making machine or cup beating machine is short, it is between 15~30 modules per minute. That is 2~3.5 seconds. Generally speaking, at present, the manipulator of the cup-making machine on the market can only reach 25 molds per minute. Normal and stable production can only be 20 modules/minute. No, it's basically just performance data.

Even if it is 20 modules per minute, it will take 3 seconds. The stability is extraordinary. . At present, there are some companies in Shantou, and Kewei Company in Zhuhai produces the manipulator of cup-making machine.

Shantou's products are relatively flat, but in practical application, Shantou's manipulator industry is average. There are few ordinary manipulators, so the customer experience of such high-speed manipulators is average.

Zhuhai can be a mechanical cup-making machine. The manipulator of the cup-making machine has good stability.