What are the precautions in the trial assembly process of office furniture production?

1, the assembly of each component should be arranged reasonably. The basic process is to install steps, drawers, doors, etc. First, assemble the frame with the assembled crosspieces, then assemble the wooden lines, then assemble the assembled drawers and doors on the frame, trim the unreasonable places, and finally polish them smoothly.

2. Before installation, you must fully understand the product structure and the configuration direction of required materials.

3. Observe whether all accessories are qualified after polishing, and pay attention to whether the whole set of accessories are processed correctly before starting work.

4. Care must be taken to protect the tenon and mortise to prevent the product from loosening.

5, in case of glue overflow, be sure to wipe it clean when the glue is not dry, don't rinse it with water.

6. After the finished product is installed, be sure to check it carefully to see if there are any defects such as missing parts.

7. Finishing includes parts polishing and finished product maintenance.

A, accessories grinding must fully understand the shape and position of the workpiece.

B, all accessories must first clean and repair incomplete abnormal pores, cut off materials, and then sand holes.

C, all accessories must be polished, smooth to the touch, natural in vision, free of thorns and burrs, and can be painted before installation.

D. Overall overhaul is the key process to ensure beautiful appearance and excellent quality of products. Maintenance must be serious and responsible, and it must be carefully cleaned. Anything that is defective and unpolished cannot be missed.

E, repair can only use the same material of wood chaff, with rubber block, with transparent rubber ash repair. However, neither the rubber block nor the transparent rubber ash can have too much surface outside the point, so as to avoid the distortion of the wood grain conduit and affect the appearance quality of the product.

F, polishing, to make the product smooth and comfortable, can't damage the edges and corners of sculpture and furniture because of excessive force. It is necessary to accurately grasp the polishing strength.