What does a driller do?

1, drilling machine is a machine tool that mainly uses a drill to process holes in workpieces. The driller is the operator who uses the driller.

2. The driller is required to be able to operate ordinary CNC machine tools and know Frank, Kane or other CNC systems; Strong drawing reading ability, cad and cnc operation experience or familiar with mold processing.

3. The drilling machine has simple structure and relatively low machining accuracy, and can drill through holes and blind holes, replace special tools, and also reaming, countersinking, reaming or tapping. In the process of machining, the workpiece does not move, so the tool moves, the center of the tool is aligned with the center of the hole, and the tool rotates (main movement). The characteristics of drilling machine are that the workpiece is fixed and the cutter rotates.

Extended data:

Matters needing attention in the operation of drilling workers:

1, before driving, check whether the machine tool transmission is normal, whether the safety block on the drilling machine has burrs, and whether the taper handle is clean.

2. After the machine is started, wear protective clothing before operation, and it is forbidden to knock with hammers and tools; You must wear a helmet, and the hem of your coat can't be opened.

Don't put anything else on the drilling machine. It is forbidden to wear gloves and electricity. Do not operate with gloves. The headstock must be close to the end to avoid damaging the platform. Should be kept clean. The cooling water baffle should be in good condition. Use a vise. Cut off the power supply to avoid throwing people around. It is forbidden to blow with your mouth and change the drill bit.

4. When the radial drilling machine clamps or corrects the workpiece, do a good job of machine maintenance and stop the cuff fastening, fixture and workpiece loading and unloading.

5, drilling machine and rocker arm rotation range, to prevent the machine from being distorted; At the same time, when cleaning tools, the rocker arm must be removed from the workpiece and lifted, or wound on the machine body. Wedge iron should be used for loading and unloading drill bits, and it should be adjusted according to the processing situation.

6, after the completion of the work, are not allowed to install spindle cone hole, take off your clothes.

Baidu encyclopedia-drilling machine worker