What are the steps of making decal radian?

Keywords white tire, patterned paper, tunnel kiln

Clay and ceramic pigments

Methods/steps

1, making white tire modeling. Many daily-use ceramic tableware companies design suitable ceramic white tire samples according to OEM orders or local customs and trends. The process is complex, and it takes a lot of money and manpower to design a white tire shape, open the mold and try to burn it.

2. Design stickers. According to the shape of the ceramic white tire, the designer began to design patterns. Generally speaking, design patterns are designed with a series of themes. The designer designs the pattern according to the unfolded drawing of the ceramic white tire modeling. The color of the designed flower surface should be made according to the ceramic pigment process, and it can't be arbitrary. Generally speaking, the more kinds of colors, the higher the cost of flower face.

3, ceramic decal process. The designed floral paper is printed and produced by the floral paper factory, and the effect achieved by the designer is a good work. Then paste the decal paper on the ceramic white tire. Before decal, the white tire should be soaked in water for half an hour, and then pasted with decal paper. When the water is completely dry (including the water sucked in by the white tire), it can be baked in the furnace, which takes about 3 hours or more.

4. Ceramic baking. Putting the painted ceramics into the tunnel kiln for firing is a slow process, which takes about 4 hours to complete, and the kiln temperature is controlled at 800 degrees. Haha, come on, a beautiful ceramic work will come out.

end

Matters needing attention

When sticking decals, bubbles cannot be hidden in the decals, and they must be scraped out with a soft scraper.

The design radian of the decal can not be completely accurate, because the decal itself will shrink, so it will not affect the appearance.

When pasting the decal, don't stretch the decal hard, because this will make the stretched area fade and affect the whole decal.