What do you think of the quality of custom-made wardrobes?

There are too many brands of custom-made wardrobes, and each one is similar. How to distinguish from the practical point of view? (There is a big wave of beautiful pictures at the end)

First, look at the face value.

1-indomitable spirit is better than not reaching the top.

Standing on the ground looks more atmospheric, the overall value is unified, and the storage is also increased, leaving no sanitary dead ends.

Not reaching the top, there is a sanitary corner, and it is ugly to put debris on the top.

dual handles

The choice of handle is also important, such as modern invisible handle or no handle.

Zhonghai Longwan Shang Gong Zu Di

3- color matching should be combined with the floor and wall. The color of the cabinet should not be too much, and the color system should be unified.

Zhonghai Longwan Shang Gong Zu Di

4- composition

Creating a sense of space in a large area simply means that the higher the cabinet, the longer it looks and refuses to be fragmented.

There are also symmetrical compositions and aligned lines.

five colors

Wood color selection simulates wood grain, that is, synchronous flower matching. Because the finished sheet is core-pulling and veneering, the customized steel plate is extruded, and the steel plate is very important. Whether it looks good or not depends on this.

Smooth board, smooth feel, no concave and convex feeling, and no solid wood texture under the light.

Synchronize the 3D texture of the flower, the bump is more stereoscopic and the texture is clearer.

Second, look at the material.

At present, all customization uses particle board, mainly because of its good stability. If the process is well controlled, environmental protection is no problem.

But particle boards are also divided into three, six, nine and so on. Good, good and poor!

It is best to use logs as raw materials, and some small workshops may break boards with waste furniture.

Formaldehyde comes from glue, and many boards are urea-formaldehyde resin glue, which is low in cost but not environmentally friendly.

Suzhou's miscellaneous brand board was leveled in 60 yuan, and Jilin Forest Industry's Lushui River was 1 10- 160 (synchronous design is expensive).

There are many environmental assessments of various chain brands on the Internet.

In fact, this is meaningless!

Because chain brands such as Euro X, Suo XX, etc. People's popularity came up. There are at least dozens of plate suppliers installed in customers' homes, and it is difficult to determine which brand the plate is.

Well-known brands in the market: Jilin Forest Industry Lushui River, Wanhua Hexiangban, Furen, etc.

In addition to seeing official website's authorization, there is also signing a contract. Which one is clearly written, one fake will be punished by ten, and formaldehyde will exceed the standard.

The lower the formaldehyde content, the higher the production cost and the more expensive the product. As for whether it is worth buying, it is a matter of opinion, and the new national standard itself is strict enough. The plates produced by domestic manufacturers such as Lushuihe of Jilin Forest Industry and Wanhua MDI all meet the new national standard E 1. It conforms to the highest European standard E 1, and can be purchased with confidence, without deliberately pursuing imported plates. (The demand for imported plates is too large, but it is easy to buy fakes, which also greatly increases the decoration budget. For example, imported boards such as Iger are only a few euros from the factory, and logistics customs and domestic agents are expensive. )

Third, look at the price.

Many people just ask how to calculate the price, how much, and how to calculate the drawer price.

In fact, there are still many places where the wardrobe can be recharged.

Places where fees can also be charged: seals, edge sealing, smooth surface, clothes hanger, flange support, color limit and internal partition.

Fourth, look at the hardware

Many people only know about hinges, but many people don't know about other hardware.

1 bottom drawer (the side can't see the hardware slide rail, the slide rail is at the bottom of the drawer) and three-stage slide rail drawer (the side can see the slide rail hardware).

Three-stage track drawer 1: drawer shakes badly 2: poor load bearing 3: clothes are easily scratched.

Bottom mounted damping pump (bearing capacity is twice that of three-section rail, stable and silky after damping)

2- There are differences in aesthetics, bearing capacity and durability between the common aluminum tube clothesline+common flange bracket and brand clothesline+brand flange bracket.

Aluminum tube clothes stem and unbranded flange

Cierre clothes rail and flange bracket.

Fifth, look at the thickness

Everyone knows that cabinets and door panels need to be 18mm thick, but few people pay attention to the back panel of the wardrobe.

There are two common wardrobe backboards: 5mm and 9mm in thickness.

Preferred 9mm wardrobe backboard

1-9mm backplane card slot installation, European and American custom brands are this process.

2- There is a moisture-proof interval of 1.8 cm from the wall, so that the cabinet will not be moldy and the clothes will not be damp.

3-slot backboard, refusing to use gun nails, improving the service life of furniture.

4-slot backboard, uniform stress, not afraid of extrusion, 5mm backboard is easy to deform.

Sixth, stay away from the local flavor and forge the whole house customization.

Now door sellers, floor sellers and decorators are all doing house customization. There are many mom-and-pop shops or small branches of chain brands in Suzhou, recruiting 1-2 newly graduated designers, with modular design, regardless of the actual situation at home (how many people are there now, how many people will be there in the future, age groups, living habits, etc.). Some designers can only draw wardrobes, while others can only draw cabinets. Can you make a cabinet and compare the scheme with several designers?

The picture of a customized brand sales circle in Suzhou is as follows.

Problem: the color difference is chaotic, and the two glass doors are not as beautiful as it. How can the height of tatami be higher than the window sill?

I don't know which customized brand completed the map online.

I don't know which customized brand completed the map online.

I don't know which customized brand completed the map online.

There is a gap in the details of the top sealing plate of the wardrobe, and obsessive-compulsive disorder indicates that it is unacceptable. The waistline is messy, the sliding door material is poor in texture, and the sense of cheapness is coming!

The above content is shared by good users on the website every day, I hope it will help you ~