How to quickly remove automobile glass film

The methods to remove the automobile glass film are: 1, tear it off directly, 2, remove vinegar, 3, remove essential oil, 4, remove alcohol.

1, just tear it off.

Inferior film is easy to handle, and the adhesive strength of this film is not particularly good, so it is easy to remove. High-quality car film is difficult to remove, you need to find a master or buy it yourself! A little bit of equipment processing;

Step 2 remove vinegar

Apply vinegar evenly to the adhesive with a cotton swab. Through the glass, we can immediately see the slow diffusion of vinegar between the glass and the adhesive. At this time, scrape the glue back and forth with a cotton swab. Soon, the glue will start to peel off one by one, and there are few glue residues on the glass. When you wipe it with paper, it will be as bright as new.

3, essential oil should be removed.

There is no obvious change when the balm and adhesive are just in contact. Stick to the balm on the glue, and then scrape it clean with a cotton swab. Slowly, I found that the glue has softened and some glue has been scraped off. With constant daubing and scraping, the reaction between them becomes faster and faster. About 2 minutes, a piece of glue was cleaned.

4. Alcohol removal

Brush the glue on the glass with alcohol, and immediately you can see that the glue slowly softens and dissolves. Gently lift it with your hand and the glue will leave the glass cleanly.

Car film has seven advantages:

1, heat insulation and sun protection. This film can block a lot of heat generated by infrared rays.

2, anti-UV. The medium wave and long wave in ultraviolet rays can penetrate through thick glass, and a layer of heat insulation film can block most ultraviolet rays. Prevent skin damage and reduce the aging of automobile interior.

3. Safety and explosion protection. The base layer of the film is polyester film, which has very good tear and breakdown resistance. In addition, with the adhesive layer of the film, the strength of the pasted glass can prevent the glass from being accidentally broken and causing harm to drivers and passengers.

4. Create a private space. Choose the right variety. Generally, you can't see the inside of the car outside after sticking the film, but you can see the outside of the car inside to keep privacy and safety.

5. Reduce air conditioning consumption. The loss of refrigeration capacity of heat-insulating film air conditioner can be compensated, which can instantly reduce the temperature inside the car and save fuel consumption to some extent.

6, increase the appearance. According to personal preferences, you can personalize and beautify the car by sticking a film.

7. Anti-glare. Reduce accidents caused by glare factors.