How to repair the broken tubular motor?

The maintenance methods of tubular motor include: replacing defective insulation materials, reducing load and replacing bearings.

1. Replace defective insulation materials.

Leakage is one of the common faults of tubular motors, which may be caused by aging of electrical insulation materials, insufficient insulation resistance and grounding of motors. ?

2. Reduce the load

Overheating of tubular motor may be caused by excessive motor load, rotor/bearing damage, poor ventilation and other reasons.

3. Replace the bearing

Bearing damage is one of the main factors leading to tubular motor damage and shortened life. Usually manifested as noise, vibration, poor lubrication and so on. ?

Skills and precautions for prolonging the life of tubular motor;

1, pay attention to maintenance.

Regular maintenance of tubular motor, such as changing lubricating oil, cleaning vents, checking bearings, replacing insulation materials, etc.

2, to prevent overload

When installing the motor, be sure to confirm the rated power and maximum load, and configure and use it accordingly.

3. Start and stop the motor correctly.

Correct methods should be adopted when starting and stopping the motor to avoid motor vibration, excessive current and other faults.

4. Avoid heat accumulation

Good ventilation should be ensured to avoid excessive heat generated when the motor is running, thus shortening the life of the motor.