Summary of Personal Work of Maintenance Electrician in 221

1.221 Personal Work Summary of Maintenance Electrician

Since I graduated from technical secondary school in 2xx and joined the work, I have been working diligently for 13 years. Looking back on this ordinary time, I have professional qualification certificates obtained by studying hard at my desk and teachers' tireless guidance, leadership recognition and various honorary certificates brought by hard work! All these achievements, I think, are attributed to my belief that the working class is the leading class of the country and the fundamental force for the cause of building Socialism with Chinese characteristics. In response to the call of the Party to hold high the banner of building Socialism with Chinese characteristics's great theory, I have always adhered to the belief of improving my professional knowledge and working hard to do my bit in socialized mass production while abiding by the law and fulfilling my duties! This is also the guiding ideology of my work and life. Anyone who leaves his guiding ideology will accomplish nothing. I will summarize my professional and technical work since I took office as follows:

1. Pay attention to theoretical study, guide practice with theory, and strive to improve my professional level.

We must learn the safety technology well, and on this basis, we can boldly learn the control technology. No matter when I was an early electrician apprentice or now I am working as an electrician monitor, attaching importance to theoretical study is an important magic weapon to improve my professional level. When I was working in a shipyard in the early days, the master was quite conservative about control technology and almost killed me all the way. In this case, I became more and more enthusiastic about theoretical study. At that time, my salary was only 2, so I couldn't bear to eat, so I borrowed books to read. I remember that I borrowed an electrician manual at that time, which was very thick, and I am most impressed now. At that time, due to the teacher's conservatism, the contactors were not allowed to be touched, so I drew the three-dimensional picture of the milling machine contactor button on the paper according to the manual, and then connected the whole machine tool according to the manual, which laid a good foundation in the future study of control technology. Now it is fresh in my memory, and the later study is more formal, and I participated in various trainings. Of course, due to the development of the network, the sharing of knowledge resources has provided more convenience for our theoretical study! I myself have been good at learning from the Internet since 2xx, and this year I also helped others design and answer questions in Baidu Know-how. The adoption rate was 6%, which consolidated my knowledge and effectively guided practice in my work!

Of course, I have a deep understanding that the so-called theory is not fixed on books, and theoretical things are not books. Teachers and lecturers can provide you with theoretical knowledge. Books are just a guide to systematically master knowledge, so you should be good at asking questions about knowledge, which will make it easier and faster to understand knowledge. What you can understand in one hour after reading a book may be enough in ten minutes under the teacher's explanation, so you should be good at asking questions about both practice and theory.

Second, no matter what company, it has something to learn.

Everyone can make achievements. Many people always like to say this sentence when communicating: Wow, your equipment is advanced. I really hope to work and study in your factory! What I want to say is that it doesn't matter if the equipment is advanced. As mentioned above, although the master was conservative in control technology, he still learned a lot about basic knowledge and good work habits, such as the skillful use of tools, knowing the main points of disassembly and assembly of anchor machine, cable machine, generator, tachogenerator, sonar and radar system, which broadened his horizons! Moreover, with more and more colleagues I know, I have more opportunities to learn. Later, I came to work in my colleagues' units to help, and I was affirmed by the leaders of my colleagues' units. I can visit some modern equipment, such as dyeing machines and tentering machines, and even lend me the control drawings of the equipment to read. I cherish this short learning opportunity and get an overview of the control of the whole modern equipment during my work, such as frequency converters, PLC and sensors. In Ningbo Chengnian Pharmaceutical, the same is true. Through learning and groping, the purified water PLC program was successfully transformed. In front of me, there are many electronic circuits in the equipment, so there are naturally many things to learn. The company has met the safety standards twice. Because the power supply system is not standardized and the information is not complete enough, in order to save costs, I led my team to transform the power supply system and often worked overtime until late at night. At the same time, the transformation process made me deeply understand five grounding systems, and the maintenance of inverter welding machines greatly enriched my electronic technology knowledge. The transformation of numerical control flame cutting machine makes our system consolidate the control technology, save capital for the factory and improve the production efficiency. In a word, you can learn something when you work in any factory, even in a garbage factory, the chargers used by workers to charge electric vehicles when they go to work are all places to learn, and you can understand it. Electronic ballasts, frequency converters and inverters will all be similar! It is this kind of work that has made me outstanding and advanced in the company for several years!

Third, be good at thinking and summing up experience no matter what stage you are in the title

As an electrician, you should always take notes and sum up your own experience! This will help to consolidate what you have learned, improve maintenance efficiency for future inquiries, and grant knowledge to others. There is a lot of basic knowledge in the work that is easy to be ignored. For example, why is the secondary side of machine tool transformer grounded? Some people are confused with isolation transformer, including senior engineers. In fact, this is common sense, that is, protective measures taken to prevent the primary side from being connected in series with the low voltage of the secondary side. Moreover, many senior workers generally don't know the meaning of AC3 on CJx2 contactor, so it is easy to waste if you don't pay attention to this when selecting it!

2.221 Personal Work Summary of Maintenance Electrician

In xx year, with the care and support of the power supply station, various economic and technical indicators and tasks were well completed. The complete success of the work was first attributed to leaders at all levels and colleagues around me. I just did what I should do and did my due duty. After years of training and tempering, I fully understand the enterprise spirit of "loyalty and dedication, pioneering and enterprising, learning and innovation, and high-quality service" advocated by superior leaders and the profound meaning of a series of advanced enterprise cultures. In Huilongsi Village, as an electrician, although he can't directly create economic benefits for the local area like other businesses, he plays an important role in escorting, just like a small screw on a machine.

Looking back on my work in the past year, I have mainly done the following work:

First, I have successfully completed the technical indicators issued.

By the end of December, our village had completed the power supply in full, the electricity fee recovery reached zero every month, the safety production achieved "three noes", the safety record was maintained for a long period, the quality service and honest service achieved good results, and the complaints reached "zero" throughout the year.

Second, production safety has maintained a relatively stable situation.

In the past year, in accordance with the requirements of "clear responsibility, strict discipline, strong supervision, and heavy rewards and punishments" proposed at the beginning of the year, I have put safety inspection and production at the top of all my work, strengthened the implementation of safety work, established all-round and whole-process safety production, actively participated in various safety activities organized by the bureau, paid attention to investigation and research on safety until the construction site learned the truth, solved practical problems, and paid attention to the construction period. In this year's tense rural power network transformation, due to effective cooperation, the whole process of safe production was ensured, accidents were put an end to, equipment maintenance and tree obstacle treatment were in place, and the distribution accident rate was reduced. The integrity rate of distribution equipment was 1%. Focus on the actual work, check hidden dangers, check accident signs and unsafe factors, and thoroughly remove the safety dead angle.

Third, earnestly implement the service and standardized management.

Over the past year, with policies and regulations as the guidelines and quality service as the purpose, we have earnestly served farmers well, improved service quality, standardized working procedures, provided services to customers, and insisted on keeping the telephone open and on call 24 hours a day. Insist on door-to-door service for customers who are inconvenient for the elderly, and implement the "heart to heart" project. As long as you receive a call for repair, you will immediately go to the door for repair, and the general accident will be repaired immediately. It is not too late to explain the situation of special accidents. For users who are inconvenient to move, they take the initiative to go to the door to collect fees and run three or four times a month. The honest service tries its best to reduce the arrears and power outages, which is well received by users. In practical work, I am even more proactive. In August-September this year, the Olympic and Paralympic Games attracted worldwide attention in Beijing. In order to ensure that people can watch TV programs and save electricity safely and in time, I gave up my rest time and worked for more than ten hours every day, checking the lines and equipment and dealing with various hidden dangers in time, thus ensuring that there was no power outage during this period. In this autumn's electricity consumption peak, there was not a power outage caused by my responsibility, which ensured the farmers to produce electricity. With hard work and warm service, we get customer satisfaction. In short, whether it is day, night, windy or rainy, as long as we receive an accident call, we can help our customers solve their problems as quickly as possible. Copying, checking and collecting are the focus of our work, which directly involves our economic benefits. In our work, we seek truth from facts, read the meter on time every month, do not estimate copying, do not miss copying, review it in time after copying, and take back the income, not too much, not too much. We put the responsibility of electricity charge recovery in place, so that electricity can be sent out. If we can't find anyone in a trip, we will block it in the morning and ask for it at home at night. It's really hard, and we have tried our best to ensure the timely recovery of monthly electricity charges through unremitting efforts. There were no complaints throughout the year, which standardized the management of rural electricity consumption, reduced the burden on farmers, and established a good image of our power supply enterprise among farmers.

Although I have made some achievements in my work in xx years, I should also face up to the existing problems and shortcomings. In the new year, the industry style and work style should be improved for higher goals, and the work discipline should be further strengthened. The awareness of quality service and honest service needs to be further strengthened.

The above is a summary of my personal work. Please criticize and correct me if there are any shortcomings!

3.221 Personal Work Summary of Maintenance Electrician

I graduated from XX technical school, majoring in coal preparation, and was assigned to work in the coal preparation workshop of Linhuan Coal Preparation Plant. I entered the electromechanical post in 1998. 2xx went to Wobei Coal Preparation Plant to participate in debugging in November, and has been the monitor of the peripheral class since then.

I have been engaged in electrical equipment maintenance for 16 years, during which I have experienced many ups and downs. From the original apprentice to the master, he has taken five apprentices, from the master to the current management staff, and now there are 18 maintenance electricians. Now, we should not only do a good job in the daily maintenance of the company's electrical facilities, but also give technical guidance to the following employees. When encountering difficult problems, we have to go to the new site to troubleshoot. After troubleshooting, we have to explain the cause of the fault and what they ignored when looking for the fault. Let them learn from it, not only that everyone can independently repair similar faults in the future, but also learn to draw inferences from others.

During these years of work, I have summed up a lot of experience, including skills, mentoring, experience and work performance.

First, consciously strengthen theoretical study and strive to improve personal quality

In many years of work practice, I deeply realized that without a firm and correct political direction, there would be no positive guiding ideology. In order to improve my ideological and political level, over the years, I have developed the habit of caring about national affairs, paying attention to the situation at home and abroad, analyzing the impact of changes in the situation on enterprises, and putting this thought into practice, ensuring that my thoughts and actions are consistent with the party's line and principles, constantly learning from Theory of Three Represents and "eight honors and eight disgraces", strictly demanding myself with party member's standards and learning from advanced model figures. Strengthen their own quality construction, and influence the people around them to join the ranks of pioneering and striving for Excellence, and make suggestions for the development of enterprises.

It is said that a person must be a man first if he wants to become a talent, and the truth is self-evident. That is to say, if a person is successful in his career, he must first learn how to be a man, especially in the highly technical work of maintenance electrician. He should work hard, concentrate on his studies, be open-minded, and tolerate no carelessness and mistakes. All work must first have a correct attitude, develop a good professional quality, be serious and responsible for his work, obey the leadership's arrangement, listen to others' advice and suggestions with an open mind, and his personal interests should be subordinate to the interests of the company, be polite to others, and be enthusiastic in service. Only in this way.

Second, technical experience

In recent years, I have helped my colleagues solve many difficult problems, many of which also have soft faults. Some replaced components have their own problems, but some maintenance personnel do ignore these points.

They trust new components too much. When they find out that a component is burnt out, they will successfully install a component with the same model. A trial machine found that the fault still existed. At this time, according to his inertial thinking, he will naturally check whether other components are damaged. After earth-shaking search, the root cause of the problem has never been found out. A good circuit board has been turned upside down.

In the process of searching, due to high concentration, the scope of searching is constantly expanding, and there is no result after a long busy day, and pressure and tension follow. Thinking will be confused and not as clear as it was at first. Later, I asked for help. Before I started, I had to ask the equipment users carefully what abnormal conditions occurred when the equipment broke down, including sound, taste and temperature.

In fact, electricians should ask the patient carefully first, just like doctors treat patients, what's wrong with them and how they feel. After asking, you will know which part has a problem, which narrows the scope of the fault. It is also very important for the patient to tell the story. If he has a headache, it is really a pain in his feet, which shifts your judgment on the fault point. That will be a bitter experience, and then ask the previous maintenance personnel to understand his maintenance process and the symptoms after the trial operation after replacing the accessories.

I found something in these inquiries. I know what he missed, and I also need to evaluate that after his maintenance, new faults may be created. At this time, the faults may not be as simple as at the beginning. Man-made fault, the original fault itself, may also appear soft fault. First, make a preliminary inspection of the equipment to determine whether it can be turned on. If it can be turned on, it should be carefully "heard" and "touched", and then check whether the working voltage of the components replaced at the beginning and the output voltage are the same as those marked on the drawings. After measurement, the working voltage of the new components is normal, but the output voltage does not match the voltage marked on the drawings.

The component was removed and measured, and it was found that the component was damaged. However, this does not rule out that this component is burnt out due to other faults after installation, and then the voltage and current of peripheral components associated with this component are measured.