What is the principle of stainless steel bending?

When bending stainless steel, pay attention to the following aspects:

1. If the stainless steel plate is processed, the thicker the unit size, the greater the bending strength we need, and with the increase of the thickness of the stainless steel plate, the bending strength will be greater when selecting the bending equipment.

2. Under the unit size, the greater the tensile strength, the smaller the elongation, so the greater the bending force, the greater the bending angle.

3. If the thickness of the stainless steel plate corresponds to the bending radius in the design drawing, according to the experience of Qijia Stainless Steel in Hangzhou Iron and Steel Co., Ltd., the unfolded size of the bent workpiece should be the thickness of plus or minus two plates at the right angle, which can completely meet the design accuracy requirements.

4. The greater the yield strength of stainless steel, the greater the elastic recovery. If the 90-degree angle of the bending part can be obtained, the smaller the required cutter angle should be designed.