Installation skills of shower room installation points of shower room

It is very good to install a shower room in the bathroom, which can bring greater convenience to our life. Not only that, but also relatively healthy and hygienic, so now people choose to install a shower room in the bathroom. What are the skills for installing a shower room? What should I pay attention to when installing the shower room? Next, let me introduce you.

First, the shower room installation skills

1. The shower curtain rod is generally installed at a height of about 2.06 meters from the ground (the specific situation can be determined according to personal habits and the height of the bathroom). Put the shower curtain rod in the position to be installed, set the drilling position and mark it.

2. The appearance of the shower room after installation should be neat and bright, and the sliding door and sliding door should be parallel or vertical to each other and symmetrical to each other. The sliding door should be opened and closed smoothly and seamlessly, and the shower room and the bottom basin should be sealed with silica gel.

3. Testing and protection: After installation, water testing must be carried out to ensure smooth launch. 4. Positioning drilling: use pencil and level to determine the position of drilling aluminum against the wall, and use impact drill to drill holes.

4. Drill a hole in the wall with a drill with a diameter of 12mm (the drilling depth is about 6cm). When drilling, make the drill bit slightly downward and the butt of the electric drill slightly upward, which can effectively prevent the shower curtain rod from sagging.

Second, the shower room installation points

1. Regular shower room manufacturers will send professionals to install, and the tools will come with them, which is faster and more convenient. The bottom basin of the shower room must be carefully installed, and testing the water is an essential part. If the shower room is properly installed, it will be more difficult to make major changes. Check whether the package of shower room is complete before installation, and be sure to check whether its configuration is complete after opening.

2. The location of the embedded hole in the shower room size should be designed before the bathroom decoration; Before installation in the shower room, the leakage protection switch device should be wired to avoid rework. The style of shower room should be determined according to the space form of bathroom. Now there are many corner or direct shower rooms, which can make good use of bathroom space.

3. When using sealed silica gel, do not apply silica gel on the surface of acrylic sanitary ware. If you accidentally apply a little, don't wipe it off, it's more difficult to remove. When it is cured, gently take it out. It is forbidden to scrape with hard objects, otherwise it will lead to surface damage. After the bottom basin is installed, it should be used after the silica gel is completely cured (the curing time of silica gel is 24 hours).

In the bathroom, some people will choose to install a shower room. Shower room can bring us more sanitary facilities. So what are the installation skills and key points of the shower room? I want to see the introduction of the above small series. Everyone knows this.