Do you use tapping oil for tapping processing?

He said that they had been using diesel tapping before, because the customers’ requirements were not high before. Now the epidemic has affected many factories and they are out of business, so customers are becoming more and more picky. A stop gauge and pass gauge are required for each threaded screw hole to remove the jam. The taps have been replaced, but the pass rate is still relatively low. The only thing that has not been replaced is the tapping oil. I have used the emulsion that others mentioned before, but the effect is not very good. 181-2963-9559

Therefore, I wanted to change to professional tapping oil to try the effect. I happened to see cases of tapping oil, professional knowledge, etc. on the Internet. There are many situations similar to what the customer described above. Many factories use diesel, engine oil, and emulsified oil for tapping. These are fine when tapping soft metal materials, but once they tap hard and brittle materials, When using metal materials, problems such as broken taps and reduced tapping quality often occur. Many factories feel that using professional tapping oil is unnecessary and a waste of money. It's like you have been wearing street clothes, and one day you suddenly try on branded clothes. The obvious difference can be clearly compared. 181-2963-9559

The so-called professional tapping oil, as the name suggests, refers to a lubricating oil used in tapping processing technology. Tapping oil is a type of lubricating oil. It is mainly used in metal processing and can play the role of cooling, lubrication and drainage. What is the purpose of using tapping oil when tapping? In reality, many masters have tapped teeth by hand, and they all know that they need to add some oil to make the tapped teeth smoother and have better thread engagement. It has become common sense that oil is needed for tapping, but we really understand why oil is needed for tapping. , I think the bosses or operators are not very clear. In fact, there are three main functions of tapping and refueling, lubrication, cooling, extreme pressure, permeability, chip removal, etc. Corresponding additives must be added to enhance the corresponding functions. 181-2963-9559

Therefore, professional tapping oil must be very professional in the selection of additives. Jiaweiao tapping oil uses imported additives, a single diesel, without additives. Many features are missing, so it's understandable that the results aren't great. Especially when customers are tapping aluminum, iron and other materials, a large amount of iron filings will be produced during the tapping process (mainly cutting taps here), and the iron filings will easily stick to the threaded holes and taps. This Sometimes tapping oil with good permeability is required to discharge processing debris, which is what many people refer to as better chip removal, especially for some processing materials with poor chip removal. 181-2963-9559

If you use tapping oil that is cheap but has no guaranteed quality, you will lose a lot of huge hidden costs that are difficult to see, such as the cost of replacing taps, labor costs, and customer returns. The cost of goods, etc., good oil will improve the efficiency of your factory, reduce your overall costs, and make you more competitive than your peers. Don’t refuse progress just because others are content with the status quo! In addition, some factories do not use tapping oil and use other industrial oils instead, which is very cost-effective. However, once a problem occurs, it will be the biggest problem and the consequences will be unimaginable.

Spend a little money to buy professional tapping oil and save a lot of money in other aspects. And if you save a little money on tapping oil, it will cost you more in other related links. Therefore, Jiawiao recommends that all customers, especially those who have higher requirements for workpiece quality, use professional tapping oil. The overall cost will be lower and the efficiency will be higher.