Data processing of working principle of American anti-gravity aircraft

The working principle data of American anti-gravity aircraft are processed as follows:

Hefei 23003 1, No.38 Research Institute of China Electronics Technology Group.

Starting with some information obtained in 5 1 52 area and some information about American anti-gravity device obtained by British hacker gary mckinnon, combined with the relevant principles of electromagnetic explosion, this paper analyzes the basic structure and functional composition of American anti-gravity device.

These functional structures meet the basic requirements of electromagnetic explosion. From this analysis, the working process of American anti-gravity device uses the principle of electromagnetic explosion. At the back of the article, the technical bottleneck of developing this anti-gravity device is analyzed locally. Finally, the prospect of further research in this field in China in the future is put forward.

1. Introduction

Judging from all kinds of intelligence data collected in areas 5 1 and 52, it seems that the United States is developing a new type of flying device, which looks like a disk. Whether the United States is developing an anti-gravity flying saucer has been in a state of conjecture, and the flight principle and internal structure of this flying device are unknown.

Until recently, from 200 1 to 2002, British hacker gary mckinnon invaded the computer networks of many sensitive departments, including the US military and the National Aeronautics and Space Administration (NASA). The local research data are obtained, and I have only a slight understanding of the ongoing research in the United States and the general structure of the saucer-shaped aircraft being developed in the United States.

In this paper, some information obtained from 5 1 and 52 areas and British hacker Gary? According to some information obtained by McKinnon about the American anti-gravity device, combined with the principle of electromagnetic explosion, the basic structure and functional composition of the American anti-gravity device are analyzed. However, some information obtained by gary mckinnon can only be described as intelligence information, and the complete structure and working principle of the American anti-gravity device are not clearly explained.

The technical details of the anti-gravity flying device have not been fully disclosed to the public, and people do not know much about the anti-gravity flying device and the technical status quo being studied in the United States. As an author who has studied the phenomenon of electromagnetic explosion and the principle of flying saucer for many years, I have made my own analysis and views on these intelligence materials.

And summed up in the following, so that the vast number of fans and UFO researchers have a certain understanding of the author's principle of UFO research, but also hope to promote and help the cause of UFO research in China.

Because the detailed information of the US military is hard to get, perhaps no one knows its details very well except inside the US military. Therefore, many viewpoints in this paper contain elements of conjecture and reasoning. If you think it is right, you can accept it. If you feel wrong, you can also criticize and correct me; If you think it needs further detailed study, you can modify and enrich it.

The ultimate goal is to hope that everyone can communicate and discuss the flight and working principle of UFOs, so that we can get closer to the facts and the truth.

2. Analysis of the working principle of anti-gravity device.

According to the basic principle of electromagnetic explosion, the author makes a preliminary analysis of the American anti-gravity device. The structural anatomical analysis diagram is as follows [Figure 1]:

After the anti-gravity device is started, the whole process of entering the normal working state is described as follows: first, the engine in the central engine room drives the inner disk with charged edges (as shown in figure 1, the charged inner disk is a radially conductive toothed inner disk) to start rotating, and the rotating charged inner disk generates a circle of current around the disk, generating a magnetic field that vertically passes through the plane of the inner disk. The moving inner disk circumferentially cuts the magnetic field lines generated by the circulating current, resulting in a radial potential difference on the inner disk.

This potential difference works together with the * * * of the inductance outer ring, which makes the periphery of the inner disk carry more charges, and more charges generate greater circulation under the rotation of the disk, which generates a new magnetic field. In this way, the self-excitation mechanism of electromagnetic explosion is produced on the rotating charged disk.

When the rotating speed of the disk exceeds a certain limit speed, the total amount of charge at the edge will be an unstable function, the process of charge accumulation at the edge of the disk will become uncontrollable, and the charge at the edge of the disk will quickly approach infinity.

In fact, with the increase of the rotating speed of the inner disk, a large number of electrostatic charges at the edge of the inner disk are self-excited, which produces and excites the electromagnetic explosion mechanism. Through the electromagnetic explosion mechanism, strong electric and magnetic fields are generated, and then electromagnetic force is generated to push the whole device [flying saucer].

How can the powerful electric and magnetic fields generated on the rotating inner disk lift the flying saucer? The reason should be attributed to two aspects. An unusually high electromagnetic field will be generated around a disk with a very high charge at its edge and rotating at a very high speed. The super-strong magnetic field will repel most of the local diamagnetic substances in the universe.

As a large diamagnetic substance, the earth is no exception. Therefore, the rotating device with super-strong magnetic field and the earth produce repulsive anti-magnetic force, which is one of the reasons why the electromagnetic explosion device [note: the terms anti-gravity device, anti-gravity aircraft, anti-gravity device, flying saucer, electromagnetic explosion device, etc. all refer to the same thing, and the same device is called differently to emphasize its functional performance] can produce anti-gravity effect.

Another reason why this electromagnetic explosion device produces anti-gravity effect is the principle of monopole induction, right? What is the floating principle of the new aerostat? There are detailed explanations in this paper, so I won't repeat them here.

Here, I have to admire gary mckinnon, who is called "the blackest hacker in history". He dug up the most confidential information of the US Department of Defense and got very detailed information. In the information he stole, the structural layout of the central drive control room of the anti-gravity device was also clearly outlined. The structural diagram of the drive control room he obtained is as follows [Figure 2]:

From the pictures obtained by hackers, we can roughly analyze several structural and functional parts in it: one is a motor installed on the central shaft to provide and drive the inner disk to rotate; Second, the lower part of the control room provides complete sets of equipment for nuclear reactors, which should provide motor energy and control equipment power; The third is the personnel activity area and console in the upper part of the control room.

Fourthly, the thick wall around the control room, of course, is not a simple wall, but a thick isolation layer device, which shields the super electric field and magnetic field generated by the rotating inner disk of the anti-gravity device from the surrounding area outside the control room. In order to ensure the normal work of personnel and electronic equipment in the central drive control room, it is necessary to shield the powerful external electric and magnetic fields with isolation layers.

Whether such a strong electric field and magnetic field should be isolated by diamagnetism of superconducting materials or by other methods is still unknown.

From the structural analysis on the drawing, it is possible to place a superconducting material isolation layer inside the isolation thick wall. In order to ensure the normal operation of this layer of superconducting material, some coil cooling pipes are often wrapped around the superconducting material in the thick wall to maintain the normal working low temperature state of superconducting material. Some thin tubes in the isolation layer reflected in the figure may be cooling tubes.

Electromagnetic explosion phenomenon caused by encouraging the rotation of inner core rotor [reference? Electromagnetic explosion phenomenon worthy of study? ), so that a strong self-excited voltage with opposite charges is generated between the magnetic core and the inductor shell. At this time, the core becomes a super magnet running at high speed, and the high-speed rotation of the super magnet produces a series of electromagnetic induction phenomena.

On the surface, this kind of electromagnetic induction can be explained as the cutting of outer planets or other cosmic substances by the moving magnetic force of the inner core, and it can also be explained as a unipolar induction phenomenon. No matter how to explain it, the high-speed rotation of the super-strong core produces the same result, that is, the induction shell, outer planet, nebula or other substances of the anti-gravity device carry the same induced charge.

The generation of induced charges of the same nature will cause electrostatic repulsion between these substances, which is strong enough to offset the self-weight of the device. This is one of the reasons why the device can be used in defying gravity.

2.3. Force analysis of flying saucer [anti-gravity device] in cosmic vacuum environment

Let's first analyze the stress relationship between the anti-gravity device and the surrounding celestial bodies in the vacuum environment of the universe. The stress relationship analysis diagram is as follows [Figure 3]:

Now, let's analyze the electrostatic force between the rotating iron core, the inductor shell and the outer planet of the anti-gravity device. Before the force analysis, it is necessary to know the charged properties of the surrounding substances when the anti-gravity device works. In fact, not all exoplanets have the same properties. Judging from the coaxial angle of the rotating shaft of the inner core rotor (the above picture shows the top sectional view of the anti-gravity device), they do have the same charged properties.

However, from the angle perpendicular to the coaxial line (the front view of the anti-gravity device, viewed horizontally), it is found that the outer surface area of the planet near the rotation center axis of the anti-gravity device is positively charged, while the outer surface of the planet far from the rotation center axis of the anti-gravity device is negatively charged. Such a charged state does not affect the repulsive force between the inductor shell and the outer planetary matter, which can be explained by the principle similar to magnetic monopole.

The charged state of foreign objects is positive near the rotating shaft and negative away from the rotating shaft; The inductance shell of the anti-gravity device is also charged, that is, it is positively charged near the rotating shaft and negatively charged away from the rotating shaft. Similar to the explanation of magnetic monopole, it can be seen that a tiny charge repulsion unit is generated between the inductor shell and the outer planet.

The high-speed rotating motion of the magnetic field lines sweeps across the outer planet, causing the same polarization phenomenon on the outer surface of the outer planet. The repulsive force between the tiny electrode on its outer surface and the electrode of any tiny unit of the inductance shell of the anti-gravity device leads to the repulsive force between the inductance shell of the anti-gravity device and the outer planet.

In addition to electrostatic force, there is also a non-negligible anti-gravity generated on this device. That is, the strong electromagnetic field generated by the core rotor of the anti-gravity device repels the magnetic field generated by most local diamagnetic substances in the universe. Previously, scientists have successfully used the existing strong magnetic field technology to successfully float frogs and mice in mid-air.

The strong magnetic field generated by the principle of electromagnetic explosion is stronger than that generated by the existing low-temperature superconducting strong magnetic field technology. Theoretically, the magnetic field generated by the principle of electromagnetic explosion is infinite and controllable. In fact, the field strength can't be that big, but it will be restricted by the puncture resistance of the material, which will be explained below. However, the magnetic field generated by the principle of electromagnetic explosion is much stronger than that generated by the current superconducting technology, which can be inferred and understood.

There is attractive force between the rotating iron core and the inductor shell, and the sum is.

There is repulsive force between the sensor shell and the planet outside the device, and is.

Assuming that the anti-gravity aircraft can be used normally, that is, it is not allowed to lose its function because it is too far away from the surface of the planet, then the ideal state is that the sum of these two forces is equal to f = f, and we can only assume this until it is completely clear, or until we reach an accurate conclusion through complicated calculations or experiments.

Of course, the hypothesis is a hypothesis after all, and it may be rejected in the end. It is the author's goal to assume that experiments can be done and actual data can be analyzed. Because this experiment requires too much speed, design and stability of the mechanism, the self-made experimental equipment will exceed the economic conditions that the author can bear, and the experiment has not been done yet.

Judging from the current cost calculation and difficulty estimation of the experiment, I am afraid that only an institution like the US Department of Defense has sufficient financial resources and fully mobilized resources to carry out the experiment. Relevant data show that the United States has been carrying out relevant experiments on anti-gravity devices around 2000.

References: Berry. M.v. and a.k.heim. Flying Frog &; ; Levilon. European Journal of Physics. 1997. Volume 1. 18,307-3 13.

3. Expose American secrets

Whether it's some confidential information stolen by hackers invading US military servers, or all kinds of strange aircraft appearing near 5 1 area and 52 area, all kinds of data show that Americans have been studying anti-gravity devices for a long time. Therefore, we have reason to suspect that the United States has mastered the fundamental principle of electromagnetic explosion and is making a prototype of the principle.

But the problem is that it has been eight years since the United States mastered the working principle of anti-gravity devices in 2000 and conducted research and development experiments. Why is the anti-gravity device of the US military not understood and recognized by everyone?

According to the author's analysis, there may be several reasons why the prototype of the anti-gravity device has not been made public in the United States: first, it is kept secret as a part of the strategic killer weapon; Second, the related technologies may not be mature. At present, there are still some technical problems that cannot be overcome and there are technical bottlenecks. The specific content is described in detail below.

What is the reason why the prototype of the anti-gravity device has not been publicly unveiled in the United States? I think the first reason should be secrecy.

Anything that needs to be kept secret has its important value. Anti-gravity device is a treasure that people have dreamed of for thousands of years. When people fly into the blue sky and have a preliminary understanding of the spatial structure of the universe, people yearn for interstellar travel in the depths of the universe. However, the existing jet propulsion system cannot meet this demand because of the limitation of distance and efficiency. From this point of view, the advent of anti-gravity aircraft will be revolutionary, and its value is self-evident.

Strategically speaking, the military always considers the strategic security of the United States. If we can develop tools for deep space interstellar travel and find a convenient passage to the deep space of the universe, it will be of great help to realize the political ambitions of the US military. If a world war really breaks out, the United States, which has mastered this technology, can even choose to destroy the earth with nuclear weapons and then immigrate to the planet.

If you can master such a good technology, you can't make it public. It was not until gary mckinnon, a British hacker, invaded the computer networks of the US military and the National Aeronautics and Space Administration (NASA) that this impenetrable wall pulled out a little wind, but it was enough to shock the world. The United States severely dealt with gary mckinnon, who sabotaged his research plan and invaded the top secret network. Mckinnon himself said: "If I am extradited to the United States for trial, I may face up to 60 years in prison.

Real murderers and terrorists don't stay in American prisons for that long. He also joked that 60 years' imprisonment was cruel. It is not difficult to understand why the US military hates gary mckinnon, and putting him in Guantanamo prison may not solve the hatred of the US military.

It is a shameful thing to invade the computer networks of the US military and the National Aeronautics and Space Administration (NASA), and the loss of such important strategic and technical information is even greater, which on the other hand reflects that the security and confidentiality work in the United States is not in place. But with this lesson, the United States can't make similar mistakes from now on, and relevant information must be more strictly guarded.

The second reason why the prototype of the anti-gravity device has not been publicly unveiled in the United States should be purely technical.

If the United States has 100% mastered the anti-gravity technology and the development method of anti-gravity aircraft, does it still need a rocket propulsion system to land on Mars? Just use such an artificial flying saucer and bring it up. Judging from the public information such as the exploration of Mars in the United States, he did not use this anti-gravity flying saucer. So from the current situation, the United States has not fully mastered the anti-gravity technology, or the anti-gravity technology in the United States is not mature so far.

If the British also obtained some such technical data through the hacker gary mckinnon's invasion of the US military network, their research results and progress should be behind the Americans. In other words, if the anti-gravity technology in the United States is not fully mature, the British probably won't work it out first.

In fact, it is not a very simple thing to study the anti-gravity device. Many of these technical problems have reached the technical limit that human beings have mastered at present. It is difficult to succeed by relying on the financial and material resources of one person or several people. Only an organization with strong financial resources like the US military can fully mobilize the best human resources in all aspects of the world to carry out such research and experiments.

The following part will roughly analyze the difficulties and technical bottlenecks in the anti-gravity device test, and we can also take this opportunity to roughly understand the difficulty of human exploration and development of anti-gravity devices.

Assuming that only from the basic principle of electromagnetic explosion, the structure of anti-gravity device is not complicated. Just as the jet of flame or matter can produce a reaction to launch a rocket into the air. The principle of rocket launching is simple, but not all countries have mastered the rocket carrying technology at present. The key is that there are still many technical details that are difficult to solve.

In the phenomenon of electromagnetic explosion worthy of study, some experimental difficulties of electromagnetic explosion principle which produces anti-gravity effect are also roughly analyzed, but there are still some points to be supplemented here. In order to successfully complete the electromagnetic explosion experiment, the following main technical problems must be solved.

One is to make the inner turntable produce abnormally high rotational angular velocity; The other is the electrical insulation between the outer ring and the inner turntable of the inductor. If we want to successfully produce electromagnetic explosion and further complete the development of flying saucer for interstellar travel, the problems to be solved are: (1) shielding the electronic control equipment by high-intensity electric field and magnetic field; Life support system in high-intensity electric and magnetic fields; And the external communication and contact in the high-intensity magnetic field area.

None of the items listed above is an easy problem to solve, and the electrical insulation between the external inductor ring and the internal turntable is the most important bottleneck problem. The electrical insulation here will directly affect the highest voltage and the highest magnetic field intensity that the anti-gravity engine can achieve. The highest voltage intensity generated on the rotating inner disk of the flying saucer is directly related to the voltage withstand characteristics of the dielectric layer.

In fact, a high voltage can be generated between the inner disk of the flying saucer and the outer ring of the magnetic pole, which is as high as the voltage that can be isolated by the dielectric ring preventing electric breakdown. If the breakdown resistance of the dielectric ring is not high, the discharge phenomenon will easily occur between the rotating inner disk and the inductor outer ring, and more static charges cannot be accumulated around the rotating inner disk. Assuming that a large amount of charge cannot be accumulated around the rotating inner disk, then a large circulation cannot be generated around the moving inner disk.

If the circulation cannot be generated, the electromagnetic field perpendicular to the plane of the inner disk cannot be generated. Then, it will eventually lead to the electromagnetic explosion mechanism can not be excited normally, and can not produce super electric and magnetic fields on the disk wing. Therefore, the electrical insulation between the outer ring of the inductor and the inner turntable is a decisive bottleneck problem, and it is very important to improve the dielectric layer withstand voltage between the outer ring of the inductor and the rotating inner disk. If this technical problem is not solved well, it is difficult to develop the anti-gravity device successfully.

Summarize the prospect

This paper analyzes the characteristics of American anti-gravity aircraft from several aspects, but because the information obtained about American anti-gravity aircraft is not specific, the technical analysis of many anti-gravity aircraft still stays on the surface and fails to decompose its technical situation more specifically.

This paper analyzes some technical data of American anti-gravity device, and its purpose is not to show Americans naked. Instead, I want to promote China's research in this field by studying the anti-gravity devices in the United States and dissecting their technical data, and stimulate China's research consciousness in this field, hoping to see our own anti-gravity flying device in China soar in the starry sky one day. Finally, an imaginary UFO map of China [Figure 4] is attached for readers to enjoy.