Safety production hidden danger self-inspection form

Safety production hidden danger self-inspection form

The form of self-inspection is very important for hidden dangers and safety in production, which is related to the quality of products and everyone's health. Self-inspection and self-inspection table are necessary for self-inspection of hidden dangers in production. The following is a sample table of self-examination and self-correction of production hidden dangers.

Self-inspection Form of Hidden Dangers in Production Safety 1 In order to ensure the safety of fire prevention and theft prevention in the office environment of our company, according to the arrangement of the company leaders, the person in charge of the comprehensive office led the relevant personnel in the office to form a safety inspection team, and conducted a strict inspection on the fire safety and theft prevention of the office building and the outdoor parking lot downstairs on the afternoon of 65438+February 12. The inspection is now reported as follows:

I. General situation of safety inspection

The inspection team first inspected the doors and windows, power circuits and switches, fire safety passages in corridors, fire-fighting facilities, environmental sanitation, etc. of all floors in the office building. Then the outdoor parking lot, green belt and lighting facilities outside the building were inspected. Through comprehensive investigation, the inspection team found that the inspection results were generally good and there were no major security risks.

Second, the existing problems

1. The doors leading to the balconies on both sides on the fifth floor were not locked, the doors of the conference room on the fourth floor and an aluminum window of the conference room could not be locked, and the door lock on the right side of the sliding door of the reading room was damaged, so outsiders could enter and exit at will, which was a potential safety hazard.

2. sundries are piled up in the reading room, which is messy and has fire safety hazards.

3. The whole building is only equipped with two dry powder fire extinguishers, and the shelf life of dry powder in the fire extinguishers is unknown; The fire hydrants on all floors are locked, but the key is missing, so it is impossible to check whether the fire hydrants can be used normally. There are fire safety hazards.

4. Some offices on the second floor don't lock the door after work, which is a potential safety hazard.

Third, the rectification measures and suggestions

1. Please ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the fifth floor, and replace the doors and windows of the conference room on the fourth floor, the reading room door and the fire hydrants on each floor with new locks.

2. Classify the reading rooms according to the "6S" management standard to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and check the safety status of fire hydrants after replacing new locks on each floor.

4. Once again, all floors of the office must lock the doors and windows after work. In view of the security risks found in the inspection, the inspection team will contact relevant personnel to make timely rectification to ensure that there are no dead ends in fire safety, no loopholes in anti-theft safety, and create a stable and safe working and living environment for the employees of the company.

Self-inspection table of hidden dangers in production safety II. Basic information:

There are three coal mining enterprises in my hometown, all of which are Jialing Coal Industry Co., Ltd., Lancaoqing Coal Mine Co., Ltd. and Kunming Hongfa Coal Mine Co., Ltd.

Second, strengthen leadership and implement responsibilities.

In order to ensure the implementation of mine safety production management, at the beginning of the year, the township people's government signed the "Yongningping Township 20 14 Safety Production Target Responsibility Letter" with all departments, village committees and mining enterprises in the township. At the same time, according to the requirements of the township government, all the target units responsible for production safety have carefully studied and decomposed the work objectives of production safety, and signed the responsibility letters for production safety step by step, with the signing rate of 1.00%, basically forming a management pattern of production safety that pays attention to production safety level by level and is implemented layer by layer, so as to achieve the goal from horizontal to vertical. A leading group for safety production of Party members with the township head as the team leader and in charge of safety was established, and the Opinions on Safety Production in Yongningping Township for 20 14 years was formulated, and a work arrangement meeting was held to clarify the work contents, rectification and responsibilities of relevant departments of mine safety production this year, and to determine the overall work of mine safety production throughout the year.

The leading group held many meetings, conveyed the relevant documents and the spirit of the meeting, and clarified the mine closure and rectification work within the jurisdiction of my township. The members of the Township Safety Committee also formulated a special work plan for mine safety production according to their respective responsibilities, and actively carried out publicity and mobilization and unannounced visits in accordance with the unified deployment of the township government, laying a solid foundation for the smooth progress of the overall work. During the period, the county land and resources bureau also visited my hometown many times to supervise the development of mine safety production.

The third is hidden danger investigation and dynamic supervision.

In view of the poor management quality of coal mining enterprises in my township, firstly, mining enterprises are strictly required to establish and improve safety production rules and regulations in accordance with laws, regulations and standards, and strengthen dynamic supervision in safety facilities, staff training and daily safety management. Second, adhere to the investigation of hidden dangers and bring coal mines and temporary mining enterprises that have obtained business licenses into the scope of supervision. Since June, due to the rainstorm, my township has specially supervised and inspected the implementation of safety facilities such as collapse prevention, flood control and flood drainage, and found various hidden dangers 16, and urged the rectification in time. Third, strict administrative law enforcement, land, police stations and other departments to jointly crack down on illegal mining activities, investigate and deal with illegal acts according to law. The fourth is to organize supervision activities. Since March, my township has carried out special supervision on the special rectification of various mining enterprises to stop illegal production in time.

Fourth, deepen the rectification and steadily push forward the rectification and closure work.

According to the relevant requirements of the municipal and county governments, this year, after in-depth research and careful study of the situation and the responsibilities of relevant departments, our township has determined the overall thinking of mine safety production throughout the year. The leading group held many meetings, conveyed the relevant documents and the spirit of the meeting, and clarified the mine closure and rectification work within the jurisdiction of my township. The members of the Township Safety Committee also formulated a special work plan for mine safety production according to their respective responsibilities, and actively carried out publicity and mobilization and unannounced visits in accordance with the unified deployment of the township government, laying a solid foundation for the smooth progress of the overall work. During the period, the county land and resources bureau also visited my hometown many times to supervise the development of mine safety production.

Verb (abbreviation of verb) is continuous improvement and long-term management.

Through the special rectification of coal mines in my hometown in recent years, the safety management level of enterprises has been improved. However, there are still some outstanding problems, mainly including: First, the foundation of enterprise safety production is weak, a considerable number of enterprises lack safety investment, use backward equipment, and have deviation in safety prevention ability. Second, employees have low safety quality, mostly migrant workers, low cultural quality, lack of safety knowledge and weak awareness of self-protection.

In view of the above problems, we will intensify our work in the following aspects: First, we will further intensify the special rectification of mining enterprises to promote the gradual improvement of the safety production situation of mining enterprises. Second, continue to strengthen safety training and education, strictly implement the system of holding certificates for special operations personnel, and do a good job in the safety protection of migrant workers. Third, continue to strengthen standardized management, promote enterprises to implement safety responsibilities, strengthen safety measures, and implement safety operations.

Self-examination and self-correction of hidden dangers in production safety Table 3 In order to implement the Opinions of the municipal government on Further Strengthening the Work of Production Safety in Enterprises (Wei (20xx) No.63) and the Notice of the Office of the Safety Committee of the New Industrial Zone on Seriously Grasping the Work of Production Safety this Winter and Next Spring and the task of ensuring the work of production safety in the first quarter of the town in 20xx, the Safety Committee of our hospital carefully organized and studied the spirit of the meeting, understood it one by one, and carefully investigated and solved the existing problems in strict accordance with the requirements.

1. 20xx65438+1October 20th-30th, the safety production committee of our hospital organized relevant personnel to conduct self-examination on the key safety requirements of the whole hospital:

1, power supply, water supply and heating facilities, autoclaves and other facilities and equipment;

2, radiology facilities and equipment; Inspection department; Management of narcotic drugs;

3, internal medicine, surgical clinic, planned immunization and other personnel gathered in the department for inspection, especially the maintenance of the power supply system in the electrical room to ensure normal operation;

4. Require all departments to conduct a comprehensive self-examination, find out potential safety hazards and write a self-examination report.

Second, the hospital safety committee is well organized, the personnel responsibilities are clear, the emergency vehicles are in good condition, the gathering places of emergency personnel are safe, the fire-fighting facilities are in good condition, and the evacuation passages are unblocked. Specially, special personnel are arranged to regularly check the fire exits in our hospital, especially at night. Organize the staff of the whole hospital to learn fire protection knowledge, improve the staff's awareness of fire protection, enhance the ability of fire emergency treatment, and play an active role in eliminating fire safety hazards; Patients and their caregivers who have always been in our hospital introduce the hospital situation and admission instructions. Set up no-smoking areas in places where patients gather, such as clinics and wards. Department directors and ward head nurses are responsible for organizing their own staff to supervise and persuade patients who smoke in oxygen wards and corridors and their nursing staff.

(a), the specific work:

1, set up a leading group for production safety, formulate a perfect system for production safety, improve the management system for production safety and implement the responsibility system for production safety. Hospital departments and departments respectively sign responsibility letters for safety production objectives, and ensure safety production according to the principle that whoever is in charge is responsible and whoever has problems is investigated.

2, combined with the actual work of the hospital, formulate the safety production system of key departments, timely wall and binding, and issued to the department, to ensure the daily work order of employees.

3. The fire-fighting facilities have been replaced, and now the hospital has purchased 10 fire extinguishers, which are equipped with fire extinguisher box to ensure the effectiveness of the fire extinguishers. Set up emergency evacuation signs, obviously.

4, transformer room, boiler room, laundry room will replace the breaker switch with air switch, boiler room has a boiler safety use license, and the staff has a working license.

5. Equip key departments with infrared alarm devices, install 24-hour monitoring facilities in the front and back yards of hospitals, and implement the system of administrative lectures, so as to organically combine technical defense, physical defense and civil air defense.

6. The fire safety knowledge training for the staff of the whole hospital was carried out, which enhanced the awareness of all staff to prevent emergencies and cultivated the emergency rescue ability of the staff of the whole hospital.

7. In view of the serious damage to the wiring leading to the family room, our hospital raised funds by itself and invited experts from the power supply station to replace all the wiring to ensure the safety of electricity use.

8. In view of the phenomenon that the dormitory leaks rain and the roof may collapse, our hospital immediately requires employees to move out of the dormitory to provide new accommodation conditions for employees and ensure their safety.

(2) There are hidden dangers.

1. Because the comprehensive building of the hospital is rebuilt from an old building, many places are not suitable for the needs of the hospital. If there is only one staircase, there is no fire escape.

2. Office Building Decoration of Caomiaozi Hospital 1997. At that time, the decoration materials were mostly wood flammable materials, and the circuits were wrapped in materials. This hidden danger was raised during the fire inspection in 20xx. Because the hospital plans to relocate at the end of 20xx, only the departments with big hidden dangers have been reformed. Through this self-inspection, there are still great security risks in the lines and decoration materials.

3. Roof leakage: After the heavy snow in 20xx, the hospital thoroughly waterproof the top floor leakage, but in 20xx, it was found that there was still rainwater leakage in the operating room and gynecology, and our hospital also waterproof the roof. Through this self-inspection, the wall and roof have been in disrepair for a long time, and there are certain security risks; The female staff dormitory leaks rain and the roof collapses.

Three, combined with inspection activities, actively carry out hospital medical safety education, improve medical safety awareness, carry out self-examination, organize a meeting of hospital department directors and heads of outpatient clinics in various centers, summarize the self-examination situation, immediately rectify the existing safety hazards, and strive for the competent authorities to put forward opinions or formulate other plans on the issues such as access, lines and leakage of rain in outpatient complex buildings within a time limit, and strive to provide a harmonious and safe medical environment for the people. Through self-examination, the awareness of safety in production has been improved, the responsibilities have been clarified, the "five in place" (responsibilities, measures, medical rescue, first-aid drugs and emergency materials) have been ensured, the duty force in holidays, emergency rooms and wards has been strengthened, and the system of safety in production and the handover of leading cadres has been strictly implemented.