How to connect two tp link wireless routers tl-wr840n with an account and a network cable?

Suppose your router is A and your parents are B.

1, the network cable is connected to the WAN port of router A. When entering the router setup, click Quick Setup, press PPEOE to dial, enter the account password, and then leave it alone and confirm all the way. Then set the DHCP server as the address: starting pool: 192.168.1.100 ~192.1.199, gateway:/.

2. Connect the network cable to your computer, connect the other end to the WAN port of router A, and then enter your computer. Go to Control Panel-Network and Internet Center-Network Connection-Adapter Settings-Local Connection (wireless connection should also be set), and right-click Properties-Internet Protocol Version 4- Settings are all changed to automatic acquisition. After the setup is completed, your computer can connect to the router normally by wired and wireless means.

3. Connect a network cable to the WAN port of router A, and the other end to the WAN port of router B. Enter the setting interface of router B, quickly set it to the step of setting the WAN port, click the dynamic IP, and go all the way to the next step. Then set the DHCP server as the address: starting pool:192.168.2.100 ~192.168.2.199, gateway:/kloc- (Later, the input mode of router B is no longer 192. 168. 1, but192.168.2.1,which can prevent crosstalk. )

4. After the setup is completed, Step 2 will change all the settings of your parents' computer adapter to automatic acquisition.

You're finished.

Typing is not acceptable.