What are the similar majors of consulting engineers?

How to define the profession of consulting engineer?

1. There are two situations:

You can apply for a major and an auxiliary major when you register for the first time, and you don't need two diplomas;

When changing the registration and adding a minor, it is necessary to provide professional education certificates related to the minor for more than one year.

Therefore, when registering for the first time, try to apply for both major and minor.

2. Major mismatch:

First of all, the requirement of working years is longer than that of professional counterparts. Secondly, it mainly depends on whether the declared performance is relevant.

What are the professional requirements for consulting engineers to apply for?

Requirements for consulting engineers to apply for majors:

1, and "major" refers to the related disciplines set in the Catalogue of Undergraduate Majors in Colleges and Universities (20 12) (Jiaogao [2012] No.9) issued by the Ministry of Education, as follows: "engineering discipline" refers to all majors under the discipline of "engineering";

2. "Economics" major refers to the economics major and economic statistics major in "Economics" under the discipline of "Economics";

3 "Management Science and Engineering" major refers to management science, information management and information system, engineering management, real estate development and management, and engineering cost major.

4. Candidates from other majors outside the above-mentioned professional scope have been engaged in engineering consulting business for 2 years.

What are the specialties of registered consulting engineers?

Registered consulting engineer major:

1. Registered consultants are divided into highway, railway, urban rail transit, civil aviation, hydropower, nuclear power, nuclear industry, thermal power, coal, oil and gas, petrochemical industry, medicine, building materials, machinery, electronics, light industry, textile, chemical fiber, steel, nonferrous metallurgy, agriculture, forestry, communication, hydrogeology, engineering survey, etc.

2. Registered consulting engineer (investment) refers to the professional and technical personnel who have passed the national unified examination and obtained the Qualification Certificate of People's Republic of China (PRC) Registered Consulting Engineer (investment) and engaged in engineering consulting business in the field of economic construction after registration.

There are several specialties for registered consulting engineers.

There are three kinds of majors, and the professional requirements in the registration requirements of registered consulting engineers are engineering disciplines or economics, management science and engineering. The registration requirements for registered consulting engineers are as follows:

1. Get a college degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 8 years.

2. Obtain a bachelor's degree or degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 6 years.

3. Obtain a double bachelor's degree in engineering or economics, management science and engineering, or graduate from a postgraduate class in engineering, and have been engaged in engineering consulting business for 4 years.

4. Obtain a master's degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 3 years.

5. Obtain a doctorate in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 2 years.

6. Obtaining the above-mentioned academic qualifications or other disciplines such as economic management, or other disciplines, and engaging in engineering consulting business will increase by 2 years accordingly.

(4) Consulting engineers which majors are similar to expand reading.

Examiner:

The Ministry of Personnel and the National Development and Reform Commission are jointly responsible for the policy formulation, organization, coordination, supervision and guidance of the national registered consulting engineer (investment) qualification system, and set up a national registered consulting engineer (investment) qualification management committee to be responsible for the qualification management of registered consulting engineers (investment). The office of the Committee is located in China Engineering Consulting Association.

Account settings:

The examination subjects are divided into four subjects: macroeconomic policy and development planning, project organization and management, project decision analysis and evaluation, modern consulting methods and practice.

Professional branch of registered consulting engineer

Examination subjects for consulting engineers: introduction to engineering consulting, macroeconomic policy and development planning, organization and management of engineering projects, analysis and evaluation of project decisions, modern consulting methods and practices. Regardless of major.

How is the consulting engineer major divided?

Provisions on occupational classification of registered consulting engineers (investment)

1. According to the requirements of the Ministry of Personnel and the State Planning Commission [200 1] 127, item 19, "The professional categories of registered consulting engineers (investment) shall be stipulated separately by the National Certified Consulting Engineers (Investment) Qualification Management Committee", these Provisions are formulated.

Two, the principle of professional classification is:

1. Consider the reality of China's accession to the World Trade Organization and the requirements of integration with international general rules;

2. According to the combination of engineering technology coverage and industry management practice;

3. It is conducive to promoting the gradual integration of the unit qualification system and the individual qualification system;

4. It is helpful for registered consulting engineers (investors) to exert their personal potential and talent flow;

5. Make full use of the existing engineering consulting management platform to simplify the operation.

Three, registered consulting engineer (investment) personal professional categories are divided as follows:

1. Transportation (including railways, highways, urban rail transit, civil aviation, ports and waterways)

2. Water conservancy and hydropower (including water conservancy and hydropower)

3 electronic information (including electronics, communication information, radio, film and television, etc.). )

4. Agriculture and forestry (including agriculture, animal husbandry, fishery and forestry)

5. Mining and mineral processing (including metallurgical mines, non-metallic mines, coal, steel, non-ferrous metallurgy, gold, building materials, etc.). )

6. Oil (including oil and gas development and exploitation projects)

7. Chemical industry and pharmacy (including chemical industry, medicine and petroleum processing, etc. )

8 power transmission and transformation (including thermal power generation, wind power generation, new energy, power transmission and transformation projects, etc.). )

9. Nuclear engineering (including nuclear industry and nuclear power)

10. machinery (including machinery, ships, weapons, aviation, aerospace, etc. )

1 1. Light industry (including light industry, food, etc. )

12. textiles (including textiles and chemical fibers)

13. Environmental engineering

14. Municipal construction (including architecture, urban planning, water supply and drainage, gas, heat, storage, urban roads, etc.). )

15. Engineering technical and economic management

Four, registered consulting engineer (investment) personal professional practice according to the above 15 professional, according to the management system were reported to the local or industry preliminary examination institutions.

Five, registered consulting engineers (investment) individuals to declare professional practice, shall not exceed two. When applying for two majors, one major should be given priority.

Six, in order to adapt to the development of national economy and science and technology, registered consulting engineers (investment) need to add new majors, which can be supplemented separately.

Seven, these Provisions shall be interpreted by the National Registered Consulting Engineer (Investment) Qualification Management Committee.

Eight, these Provisions shall come into force as of the date of promulgation.

How is the professional category of registered consulting engineer (investment) divided?

Can declare a major:

1. Highway (road, bridge and tunnel, traffic engineering);

2. Railways (tracks, hubs, bridges and tunnels, communication signals);

3. Urban rail transit (tracks, hubs, bridges and tunnels, communication signals);

4. Civil aviation (track, communication, navigation, air traffic control, oil supply project);

5. Hydropower (power transmission and transformation);

6. Nuclear power and nuclear industry (conventional island of nuclear power plants; Reactor, nuclear fuel, etc. );

7. Thermal power (power transmission and transformation, power supply and distribution);

8. Coal (mine, coal preparation, coal chemical industry);

9. Oil and gas (oil and gas surface, offshore oil, pipeline transportation, oil and gas storage);

10. Petrochemical;

1 1. Chemical industry and medicine (chemical engineering, product storage and transportation, mining; Chemical raw materials, Chinese patent medicines, pharmaceutical preparations);

12. Building materials (cement engineering, glass, ceramics, refractories, new building materials, non-metallic minerals);

13. machinery (including aerospace, aviation, ships, weapons and automobiles);

14. Electronics (electronic system, basic parts, microelectronics engineering);

15. light industry (paper, food, tobacco, sugar, salt, daily chemicals, household appliances, leather, packaging industry, etc.). );

16. textiles and chemical fibers (textiles, printing and dyeing, clothing; Chemical fiber raw materials, chemical fiber engineering);

17. steel (smelting, rolling, metal materials, coking and refractory materials, mines);

18. Non-ferrous metallurgy (non-ferrous metals, gold, smelting, metal materials, coking and refractory materials, mines);

19. Agriculture (planting, animal husbandry, fishery, facility agriculture);

20 forestry (afforestation, forest products industry, forest products chemistry, ecological environment, forest engineering);

2 1. Communication information (wired communication, wireless communication, communication tower, postal engineering, informatization);

22 radio, film and television (radio and television transmission, film projects);

23. Hydrogeology, engineering investigation and geotechnical engineering;

24 water conservancy projects (reservoir hub, water diversion, irrigation and drainage, river regulation, soil and water conservation, urban flood control, reclamation projects);

25 port river and sea engineering (port, waterway, navigation structure, water traffic);

26. Ecological construction and environmental engineering (ecological construction; Water pollution prevention, air pollution prevention, solid waste treatment, noise prevention, pollution control project);

27 municipal public works (municipal transportation, water supply and drainage, gas heating, landscape architecture, environmental sanitation);

28 buildings (including civil air defense projects);

29. Urban planning;

30. Comprehensive economy;

Others (according to specific majors, such as: tourism engineering, commodity grain, meteorological engineering, land resources, land consolidation, poverty alleviation engineering, immigration engineering, marine engineering, new energy, etc. )

What do registered consulting engineers usually study?

Examination conditions for registered consulting engineer:

Any citizen of People's Republic of China (PRC) who abides by national laws and regulations and meets one of the following conditions may apply for the qualification examination of registered consulting engineer (investment).

1, having been engaged in engineering consulting related business for 8 years after graduating from engineering technology or engineering economics;

2, engineering technology or engineering economics after graduation, engaged in engineering consulting related business for 6 years;

3. After graduating from the second bachelor's degree or postgraduate class in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 4 years;

4. After obtaining a master's degree in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 3 years;

5. After obtaining a doctorate in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 2 years;

6. Those who have obtained the above-mentioned education or degree in non-engineering technology and engineering economics will have a corresponding increase of 2 years in engineering consulting-related business years;

7. Other conditions stipulated by the Ministry of Personnel and the State Development Planning Commission.

Is there a difference between the professional distinction of consulting engineers and reference books?

The examination consists of four subjects: future macroeconomic policy and development self-planning, project organization and management, project decision analysis and evaluation, modern consulting methods and practice. Candidates should bring pens or signature pens (black), 2B pencils, erasers and calculators (silent and without editing and storage functions) when taking the exam. Draft papers are distributed by local personnel examination centers and recycled after use.

"Modern Consulting Methods and Practice" is a subjective question, marked online and answered on a special answer sheet. Note: 1. Read the answer carefully before answering the question (the first page of the answer sheet); 2, in strict accordance with the instructions, according to the position indicated by the title, answer in the effective area; 3. In order to ensure the scanning quality, you must use a pen or a signature pen (black) to answer; 4, subject marking work by the national unified organization and implementation, specific matters will be notified separately.

On the Business Correspondence of Registered Consulting Engineer

Personal opinion, for reference only:

(a) the initial registration according to the following professional registration:

(1) diploma major.

(2) professional title.

(3) post expertise.

(2) Radio and Television Engineering: You can apply for radio and television majors.

(3) Economic management: Sorry! I don't know