What does the following English document mean? Translate it by a master! ! It's from Inter Milan's handbook!

A direct address: the instruction has no ModR/M bytes, and the address of the operand is in the instruction code. You cannot apply base address registers, index registers or scale factors (for example, Remote Employment Matching Program (Electronic Arts)).

Select a control register (0F22 example, transfer (0F20 0f20,0f22)) in the ModR/M byte field in Chapter C. ..

Select a debug register in the ModR/M byte field in Chapter D (for example, transfer (0F2 1, 0F23)). ..

The operation code of ModR/M bytes in EA, and specify the following operands. Operands can be general registers or memory addresses. If it is a memory address, the address is calculated from the segment register and the following values: base address register, index register, scale factor and displacement.

F electronic sign/radio frequency sign registration.

Select a general register for the ModR/M byte field in Chapter G (for example, axe (000)).

My real-time data: the values of operands are encoded in the following instruction bytes.

J's instruction contains a relative offset to be added to the instruction pointer register (for example, employment matching plan (0E9), round robin).

M-shaped ModR/M period may only refer to byte memory (for example, constraints, employment counseling, Mormonism, support and service law, labor force survey, LGS, CMPXCHG8B).

In the MODR/M byte field of R/M period, choose one to fill in four words, and register with MMX's technology factory.

This instruction has no ModR/M bytes. The offset of this operand is an instruction encoded as one word or two words (depending on the address size attribute). The base address register, index register or scale factor (for example, transmission (A0-A3 type)) cannot be applied. Go away. 3B opcode mapping in A-3

The ModR/M byte field in Chapter P selects a crowded four-word MMX technology registration.

Quality assurance ModR/M byte operation code, and specify the following operands. Operands can be MMX technology registrations or memory addresses. If it is a memory address, the address is calculated from the segment register and the following values: base address register, index register, scale factor and displacement.

The field of MODR/M bytes of the R/M period of RThe may only refer to general registration (for example, transmission (0F20-0F23)).

Select a segment register (for example, transfer (8C, 8E)) for the ModR/M byte field in the selected chapter.

Select 128-bit XMM register as the domain of modR/M bytes in r/m period.

The 128-bit XMM register is selected for the ModR/M byte field of the volt chapter.

Opcode of ModR/M bytes in Western Australia, and specify the following operands. Operand can be 128-bit XMM register or memory address. If it is a memory address, the address is calculated from the segment register and the following values: base address register, index register, scale factor and displacement.

X memory is handled by the deputy director: register RSI (for example, MOVS, TCM, timeout or detection limit).

Memory processing of embryonic stem cells: RDI for registration (for example, MOVS, TCM, Immigrant, Stos or Zhengnan).