Precautions for installation of sink

1. The installation position of the sink should be reserved in advance. Tell the supplier to increase the size of the sink when purchasing. So as not to cause dimensional rework. When installing the sink, the volume of the reserved sink on the kitchen countertop should be consistent with the size of the sink. The sink should be installed firmly to prevent shaking from left to right.

2. Put the faucet and water pipe on the sink first. In addition, one end of the water inlet pipe on the faucet is butted with the water inlet switch. Before installing the faucet, clean up the sundries in the water pipe to prevent sundries from entering the faucet and damaging the valve core. After the sink is bought, workers usually cut the cabinet countertop according to the size of the sink. After the sink is placed on the countertop, it is necessary to install a matching pendant between the sink and the countertop, so that the sink can be firmly installed and the small gap can be avoided to cause the sink to shake left and right.

How to install the kitchen sink? What should I pay attention to when installing the sink?

3. One is drainage inspection and edge sealing. After the resettlement is completed, the drainage inspection should be carried out, the water tank should be filled with water, and the drainage of sewers and overflow holes should be tested. If water seepage is found during drainage, it should be reworked immediately. After the drainage inspection, the water tank can be sealed only if there is no problem.