safety protocol

In today's society, various agreements appear frequently, and agreements can be the legal basis for both parties. How was the general agreement drafted? The following are five security protocols that I have compiled, which are for reference only and I hope to help you.

The safety agreement number 1 is to implement the policy of "safety first, prevention first, comprehensive treatment", clarify the safety responsibilities of both parties, and ensure the safety of people and facilities during construction. In accordance with the relevant national laws and regulations, both parties reached an agreement through consultation and signed this agreement.

I. Project:

Second, the project address:

Three. Party A's responsibilities

1. Party A shall be responsible for protecting the equipment and accessories from the time when the equipment enters the site to the time when the equipment is dismantled, and the responsible party shall be held accountable for any damage. The user shall be responsible for the accidents caused by the violation of operating procedures during use.

2, formulate emergency rescue plan for mechanical equipment production safety accidents;

3. Set up obvious safety warning signs within the scope of equipment activities and do a good job in safety protection.

4. Designate full-time equipment management personnel and part-time safety production management personnel to conduct on-site supervision and inspection.

5, such as mechanical failure or abnormal situation, immediately stop using, after being hidden dangers eliminated, can be put into use.

6. Provide the safety unit with the foundation construction data of the installation equipment location.

7, review the mechanical equipment manufacturing license, product certificate, filing and other documents, review the certificate and special operation certificate.

8. The lessor shall not be forced to upgrade the objects that are not allowed by the specification.

Four. Party B's responsibilities:

1. The leasing unit must provide complete leasing qualification information and sign a mechanical leasing contract.

2. The leased machinery and equipment entering the construction site shall have manufacturing license, product contract certificate, inspection certificate, single machine filing certificate, installation and use certificate and complete safety technical files.

3. Prohibit the mechanical equipment explicitly eliminated by the state from entering the construction site.

4, mechanical equipment installation and removal, shall obtain the corresponding qualification and safety license issued by the competent department of construction in accordance with the law, and within the scope of its qualification for installation and removal projects.

5. Both the user and the general construction contractor should make clear their safety responsibilities. The user shall sign the safety technical standards and equipment performance requirements before use, and the operator shall bear all the responsibilities for unauthorized use.

6, in strict accordance with the operating rules, regular maintenance, such as mechanical operation problems and mechanical equipment quality problems caused by mechanical safety accidents, Party B shall compensate all losses and bear the responsibility.

7. Party B shall regularly inspect, maintain and maintain the machinery and its safety protection devices, slings and rigging, make records and establish machinery management accounts.

8. During the installation and removal, Party B must strictly abide by the established installation and removal plan. If the construction is not carried out as required, Party B shall bear the corresponding responsibility for safety accidents.

Party A's unit: Party B's unit:

Replace table: Replace table:

Date: Date:

Note: This mechanical equipment safety agreement is for reference only, and the project department can modify and sign it according to the actual situation.

Article 2 of the security agreement: Party A: the person in charge at xxxxxxxxxxxx level.

Party B: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Party C: School.

1. This party should abide by the law in all aspects, and its content is healthy and progressive.

2. This activity needs the cooperation and support of the organizers and participants to keep all aspects of the party going smoothly.

3. Members of the lesson preparation team should take every task they are responsible for seriously, handle their own work carefully, and assist other lesson preparation teams;

4. During the activity, if there is any accident, it should be reported to the person in charge of the activity immediately, and the person in charge will coordinate and solve it; If the person in charge can't solve it, report it to the instructor immediately, and the instructor will coordinate the solution.

During the performance, the two programs after the performance must be prepared in the background. If the last program cannot be carried out on time for various reasons, the next program will follow up in time. The audience is not allowed to boo, and the class monitor maintains the order of the contestants in each class.

6. If there is a power outage during the party and there is no normal power supply within 30 minutes, the host will announce that the party will be held another day, and there will be no commotion during the power outage. Listen to the arrangement of the person in charge and leave in an orderly manner.

7, take good care of personal property, if there is any property loss, report to the person in charge in time.

8. After the activity, the mobile group is responsible for organizing the audience to leave in an orderly manner;

9. After the activity, no one is allowed to stay except the students who clean and clean the site.

10, all participants are not allowed to carry dangerous and explosive articles.

1 1. If the school property is damaged, the damaged person shall pay compensation according to the price.

Remarks: Pay attention to safe use of electricity, do not drink, fight or trample.

Signature of Party A: xx

Signature of Party B: xx

Signature of Party C: xx

Signing time: xx, xx, XX.

Chapter III of Guarantee Agreement Lessor: (hereinafter referred to as "Party A")

Lessee: (hereinafter referred to as "Party B")

In order to strengthen safety management and implement safety responsibilities, Party A and Party B, based on the principle of equality and voluntariness, signed this safety agreement (hereinafter referred to as this agreement) through friendly negotiation as a supplementary agreement to the original Enterprise Entry Agreement. ..

I. Responsibility of Party A

1. Party A shall conscientiously implement the Law of People's Republic of China (PRC) on Work Safety/the Law of People's Republic of China (PRC) on Fire Prevention and other relevant safety regulations of government departments.

2. Before the enterprise moves in, explain to Party B the safety precautions in key parts of the working environment.

3. Actively assist in solving the safety problems raised by Party B. ..

4. Party A shall regularly check and maintain the hidden dangers of the fire-fighting facilities and equipment in Party B's leased premises, and notify Party B to make timely rectification if necessary.

5. Party A shall conduct fire safety training for enterprise safety leaders and park safety management personnel from time to time. (Fire safety training includes fire equipment use training, fire knowledge training, fire escape drills, fire emergency drills, safety knowledge training lectures, etc. )

II. Responsibility of Party B

1. Party B shall conscientiously implement the Law on Work Safety in People's Republic of China (PRC), the Law on Fire Prevention in People's Republic of China (PRC) and other relevant safety regulations of government departments. In the production process, organize employees to carry out regular safety education, seriously abide by the safety operation rules, pay attention to the safety of electricity use, and ensure that fire prevention and anti-theft measures are in place.

2. Before entering the site, Party B shall check and determine the working environment and relevant fire-fighting facilities and equipment, and contact Party A in time if there are any problems.

3. If Party B needs to decorate the leased house, Party B shall submit the decoration scheme to the relevant competent departments such as fire department for examination and approval, and report it to Party A for filing, otherwise, all legal and economic responsibilities shall be borne by Party B.. During the renovation period, Party B shall strictly abide by the safety construction management norms and undertake the construction safety responsibility by itself.

4. During the lease period, if Party B violates the relevant regulations on safety management, causing casualties, Party B shall handle it by itself according to law; All legal consequences and economic losses shall be borne by Party B. ..

5. Party B's personnel shall not use or dismantle the original facilities and equipment of Party A's leased house without authorization. If personnel (including Party A's and Party B's personnel and third-party personnel) are injured due to failure to implement this regulation, all consequences and economic losses shall be borne by Party B. ..

6. Party B shall designate a person in charge of safety to conduct safety education and training for all employees of the unit, and conduct management and regular inspection according to law.

7. Party B shall seriously implement the relevant precautions listed in Article 7 of this Agreement, and during the lease period, Party B shall take full responsibility for the safety of the leased premises.

3. During the lease period, Party B shall unconditionally obey Party A's safety management, and Party A has the right to issue a rectification notice to Party B on the potential safety hazards in the leased house, and Party B shall complete the rectification within the time limit specified by Party A. If Party B fails to rectify in time as required, Party A may impose a fine on Party B according to the nature until the lease contract between both parties is terminated.

Four. If Party A or Party B fails to strictly implement the agreement, resulting in casualties of the other unit or the third party, the responsibilities shall be divided according to the relevant provisions of relevant laws and regulations on production safety, and shall be handled through consultation according to law.

5. This agreement is made in triplicate, two for Party A and one for Party B, with the same legal effect.

Intransitive verbs This agreement shall come into effect as of the date of signature and seal.

Seven. Attachment: Precautions for power consumption, storage and fire control.

(A) electricity matters needing attention

1, electrical appliances (1) do not violate the Safety Work System for Power Shutdown Maintenance, and then the maintenance personnel get an electric shock due to misoperation.

Don't violate the "Safety Operation Rules for Live Overhaul" and make the operator get an electric shock. (3) The mobile device has no electricity. (4) Do not rinse with water or wipe the electrical equipment with a wet cloth. (5) Don't help others to get an electric shock in violation of regulations, causing the ambulance personnel to get an electric shock together. (6) When repairing lines with high-voltage capacitors, discharge them.

(7) Do not use high-power or ultra-high-power electrical products that exceed the specified load.

2. Architecture

(1) It is forbidden to connect the power protection grounding to the wrong zero line, and the position of the socket live wire and the zero line is reversed to make the bushing live. (2) It is forbidden to connect the plug unreasonably, resulting in exposed power cord and electric shock. (3) It is forbidden to electrify the lap joint due to irregular erection of power supply lines. (4) It is forbidden to change the air switch that does not meet the original specifications at will, otherwise it will lose the short-circuit protection function and lead to electrical damage. (5) It is forbidden to carry out grounding protection for electrical equipment during construction.

(6) Without permission, the related electrical equipment in the park shall not be used without authorization. 3. In terms of the quality of electrical products and tools (1), it is forbidden to lack protective facilities for electrical equipment, which will normally cause electrical damage and electric shock. (2) It is forbidden to use unqualified or unreasonable tools or insulation facilities to cause maintenance personnel to get an electric shock during live working. (3) It is forbidden to use inferior materials, and products with low insulation grade, poor aging resistance and easy to get an electric shock made of materials that do not meet the design requirements.

4. Other aspects (1) reduce the insulation level of electrical equipment to the ground.

(2) Keep the electrical circuit and equipment in normal working condition to prevent abnormal high temperature, electric spark and electric arc; (3) For occasions where normal operation will produce electric sparks or electric arcs, attention should be paid to stay away from flammable materials, and necessary protection should be given to the splash of electric sparks;

(2) Warehousing precautions

1. In order to strengthen warehouse safety management and ensure safety, this regulation is formulated in accordance with national laws and regulations on fire safety.

2. Warehouse safety management must implement the policy of "prevention first" and the principle of "whoever is in charge is responsible".

3, the warehouse must determine the specialist is responsible for fire safety, and establish and improve the fire prevention rules and regulations.

4, warehouse keeper should be familiar with the classification of the warehouse, nature, business knowledge and fire safety system, master the operation and maintenance methods of fire equipment, do a good job.

5. Warehouse articles should be stacked in strict accordance with the requirements of "five distances" (lamp distance, pile distance, row distance, column distance and wall distance), and should not be mixed.

6. The electrical equipment in the warehouse must conform to the current national electrical design, construction, installation and acceptance standards and specifications. The electrical devices of Class A and B goods warehouses and Class C liquid warehouses must comply with the current national electrical safety regulations for explosive dangerous places.

7. Mobile lighting lamps are not allowed in the warehouse. It is forbidden to pile up articles around lighting lamps and electrical equipment and under trunk trunking, and the distance between the vertical lower part and the horizontal part of stacked articles shall not be less than 0.5m ..

8, each warehouse should be installed separately outside the warehouse switch box, storage personnel from the library. The switch must be turned off. It is forbidden to use unqualified safety devices. Electric stoves, soldering irons, electric irons and other household appliances such as televisions and refrigerators are not allowed in the warehouse.

9, warehouse should set up obvious fire signs. It is strictly forbidden to use naked fire, smoking and living in the warehouse.

10. The warehouse shall be equipped with sufficient fire-fighting equipment according to relevant national fire-fighting laws and regulations to ensure convenient and safe use.

1 1, formulate safety management and patrol system for power supply, fire source, inflammable and explosive articles, and implement fire prevention responsibility system step by step and post fire prevention responsibility system; Organize fire inspection to eliminate fire hazards.

12, set up a voluntary fire brigade, conduct regular business training, formulate fire emergency plans, and carry out self-prevention and self-rescue work.

13, the warehouse strictly implements the night duty and patrol system, and the foremen should carefully check and supervise the implementation.

14, Class A and Class B bottled liquids should not be stored in the open air. When it must be stored in the open air, cooling measures must be taken in hot season.

15. Inventory items should be classified and stored in different stacks. The area of each stack should not be greater than 100 m2, the spacing between stacks should not be less than 1 m, the spacing between stacks and walls should not be less than 0.5m, the spacing between stacks and beams and columns should not be less than 0.3m, and the width of main passages should not be less than 2m.

16, Class A and B articles and general articles, as well as articles that are prone to chemical reactions or have different fire extinguishing methods, must be stored in different rooms and warehouses, and the names, properties and fire extinguishing methods of the stored articles should be marked in conspicuous places.

17. The packaging containers of Class A and B articles should be firm and sealed. When articles are found to be damaged, deformed, deteriorated or decomposed, they should be handled safely in time to prevent them from running, leaking, dripping and leaking.

18. When loading and unloading Class A and Class B articles, operators are not allowed to wear work clothes and hats that generate static electricity, and tools that generate sparks are not allowed to be used to prevent vibration, impact, heavy pressure, friction and inversion. Measures should be taken to eliminate static electricity for loading and unloading equipment that is easy to generate static electricity.

19. After the loading and unloading operation, the storage area and warehouse should be inspected and confirmed to be safe before leaving.

20, warehouse should set up eye-catching fire signs. Persons entering the storage area of Class A and B articles must register and hand over the kindling they carry.

2 1, open flame operation is not allowed outside the warehouse. The fire-fighting facilities and equipment in the warehouse should be managed by a special person, who is responsible for inspection, repair, maintenance, replacement and purchase, to ensure that they are in good condition and effective, and it is strictly forbidden to occupy, bury and misappropriate them.

(3) Fire prevention measures

1. During the lease period, Party B shall strictly abide by the Fire Protection Regulations of People's Republic of China (PRC) and related systems, and actively cooperate with Party A to do a good job in fire control, otherwise all responsibilities and losses arising therefrom shall be borne by Party B. ..

2. During the lease period, Party B shall properly keep and maintain the fire-fighting equipment provided by Party A at the premises leased by Party B, and shall not move or damage it at will. It is strictly forbidden to use the fire control facilities in the building for other purposes.

3. Party B shall not occupy or block the normal use range of fire fighting equipment and facilities such as fire hydrants, fire extinguishers, fire doors and fire shutter doors. Party B must ensure that the fire escape is ringed and unblocked.

4. Party B shall be fully responsible for the fire safety of the leased house during the lease period according to the relevant regulations of the fire department. Party A has the right to check the fire safety of the leased premises within a reasonable time agreed by both parties, but shall notify Party B in advance. Party B shall not unreasonably refuse or delay the consent.

Party A (seal) and Party B (seal)

Representative of Party A: Representative of Party B:

20xx Year Month Day 20xx Year Month Day

Article 4 Construction Party (Party A) of the Safety Agreement:

Installer (Party B):

The Equipment Lease (Use) Safety Agreement is a supplementary agreement after Party A and Party B sign the equipment lease contract. Party A and Party B shall perform their respective duties and obligations according to the contents of the agreement to ensure the safe and normal operation of mechanical equipment.

I. Party A's Safety Responsibility

1. The safety facilities of mechanical equipment provided by Party A are complete and effective and meet the technical requirements.

2. The ownership of the tower crane in use belongs to Party A, but Party B shall bear all safety responsibilities during installation and disassembly.

3. Party A shall be randomly equipped with two professional tower crane drivers with certificates, and the tower crane operators shall operate according to the safety operation procedures.

4. The dispatched operators obey the management of Party B and have the right to refuse illegal command and operation.

5. In case of potential safety hazard or safety accident during use, have the right to take back the right to use the tower crane at any time.

6. Party A is responsible for the maintenance of the quality problems of the equipment itself.

Two. Party B's Safety Responsibility

1, Party B must be equipped with professional commanders with certificates. Otherwise, all safety accidents caused thereby shall be borne by Party B. ..

2. Party B shall set up a separate circuit and a special distribution box for the tower crane according to the Technical Specification for Temporary Electricity Use on Construction Site JGJ46—20xx, and repeat grounding. Party B shall bear the safety accidents caused by non-compliance with the specification requirements.

3. Party B has the responsibility to ensure that the equipment and all accessories are not lost or damaged artificially during the installation and disassembly, otherwise, it shall compensate the losses according to the price.

4. In the process of construction, if a safety accident is caused by illegal operation or illegal command of Party B's operators, Party B shall bear all the accident responsibilities. All losses and impacts caused to Party A shall be borne by Party B. ..

5. During the installation and disassembly, Party B is responsible for the inspection, repair and maintenance of the tower crane and the calibration of safety protection devices to ensure the safe operation and good technical performance of the equipment.

6. Party B shall formulate a safety management system according to the actual situation, and be responsible for the safety management of tower cranes to ensure the safety in use.

7. Party A is responsible for the daily maintenance of the equipment, which is maintained by special personnel. If you encounter mechanical failure, you must be on call to repair it in time. It is forbidden to run the equipment in spite of illness. Provide good working conditions for the equipment to ensure the safe and normal operation of the equipment.

8. Party B has the responsibility to supervise the safety of tower crane operation commanders and stop illegal operations. Strictly abide by the tower crane safety operation procedures and "ten don't hang" (1>; The weight of the hoisted object exceeds the mechanical bearing range, so it is not allowed to lift 2> If the signal is unclear, don't hang up 3> If the weight is unknown, don't hang up 4 >; People standing under the hanging objects do not hang 5>6> vertical members do not hang 7> loose objects cannot be tied firmly and hung 8> objects cannot be hung without containers 9 > large formwork does not hang without clasp10 > Buried things don't hang)

9. Party B shall regularly conduct safety education and training for tower crane operators and commanders to ensure safe production.

10, Party B has the right to check the working hours of tower crane operators at any time, and has the right to punish those who violate the rules. If the tower crane driver of Party A is not active, which affects the normal construction, Party B has the right to request the replacement of the operator.

1 1.6 or above, Party B shall stop tower crane operation and take corresponding protective measures.

12. Party B shall take corresponding safety protection measures for the hoisting machinery on the construction site according to the changes of different construction stages, surrounding environment, seasons and meteorological conditions.

13. When the construction site is temporarily shut down, the site protection of hoisting machinery should be done well, and obvious safety warning signs should be set up within the activity range of hoisting machinery (equipment movement, jib, hook activity and coverage).

Three. Matters not covered in the above terms shall be settled by both parties through consultation.

Four. This agreement is made in duplicate, with Party A and Party B holding one copy respectively. ..

Party A (seal): Party B (seal):

Agent (signature): Agent (signature):

Tel: Tel:

Date: Date:

Article 5 of the Security Agreement Party A:

Party b: Guizhou express elevator engineering co., ltd

Party A: Speed up the 22nd floor 1000kg of two elevators in Duyun Zhu Yun Building to1.6/s. The elevators have been used by Hangzhou Xinma Elevator Co., Ltd. for more than ten years, and the elevators with potential safety hazards shall not be used unless they are rectified by the Special Inspection Office.

1. Add an upward overspeed safety device (rope clamp).

2. Replace all contactors.

3. Safety switch,

4, control the computer motherboard and other related components (with replacement list).

1. construction period: all materials will arrive within ten days after receiving the advance payment, and the site construction time will be six to eight days, and the application will be accepted.

Second, during the construction period, our company should have the personnel of the future warranty unit to participate in the inspection and acceptance of whether to replace parts according to the replacement list.

3. The replaced raw materials shall be owned by Party A, and Party B shall not take them away. During the construction period, the elevator management personnel of Party A shall cooperate with Party B to keep the elevator running during the construction period.

maintenance program

First, replace the speed limiter and install the upward overspeed.

Second, replace the contactor in the control cabinet.

Third, replace the safety switch of the hoistway car.

Four, check the pit, car roof function, to achieve safe operation, to ensure the annual inspection.

Five, change the car refueling guide shoes, change the oil (oil is purchased by Party A).

Six, check the hall door, each floor door lock, replace some door waste, car door waste two replaced, hall threshold, sill hygiene, machine room car roof tunnel pit comprehensive cleaning.

Seven, all maintenance and adjustment work is completed, the elevator is put into trial operation and meets the requirements, before replacing the control main computer board. Party B is responsible for filling in the self-inspection report after the comprehensive debugging is qualified, and Party A will report it to the Special Inspection Office for acceptance in time.

Eight. Payment method: both parties sign two elevator maintenance contracts, with an advance payment of 40,000.00 yuan, and an invoice of 40,000 yuan will be issued only after the payment receipt is provided at the time of settlement. After the maintenance and rectification is completed, the contract will be completed after it is accepted by the special inspection office and Party B provides the invoice to settle the balance. If the parts replaced by Party B are naturally damaged due to quality problems within 12 months of normal use, Party B shall be responsible for replacing them free of charge. This agreement has legal effect. This agreement is made in duplicate, one for each party.

Party A: Representative:

20XX x month XX day

Party B represents Guizhou Express Elevator Engineering Co., Ltd.:

20XX x month XX day