Practice of firewood stove in rural areas

The practice of rural wood stoves is as follows:

Material preparation: water, brick, cement, lime, ash leakage net, etc.

1. Draw the frame of smokeless firewood stove, and cut a 3 cm shallow pit down at the position of the frame.

2. Mix cement, lime and water in the correct proportion for later use.

3. Build the basic framework of firewood stoves with bricks. Bricks are tiled. Remember to leave the furnace mouth. The ash at the bottom of the stove is about 25 cm high, which is used to place the ash leakage net.

After 4.6 layers of bricks, build a smoke outlet. A smoke outlet is built about 30 square meters away from the back half brick in the middle of the stove, and it is built upward until the stove is close to the waist height. After the framework is completed, determine the division of the stove according to the size of the pot.

5. Then smooth the stove with cement slurry after dividing it, and finally wait until it is dry before you can start using it.