Do consulting engineers still distinguish between specialties?

① About the professional correspondence of registered consulting engineers

Personal opinion, for reference only:

(1) Initial registration is based on the following majors:

p>

(1) Graduation certificate major.

(2) Professional title.

(3) Professional position.

(2) Radio and television engineering: You can register as a radio and television major.

(3) Economic management: Sorry! Uninformed.

② Are the consulting engineers of the National Development and Reform Commission divided into majors?

(1) The examination for registered consulting engineers is not divided into majors, and registration is divided into majors.

(2) Except for the National Development and Reform Commission, no other departments have registered consulting engineers.

③ How to distinguish the major when registering as a consulting engineer? Should it be a major with a professional title certificate or a major with a diploma?

The diploma must be copied, and the major of the professional title certificate is related to your registered engineer exam It can also be used in different majors, and it can be used as appropriate depending on the major.

④ Are the consulting engineers of the National Development and Reform Commission divided into majors?

There is no major distinction during the exam. You need to be divided into majors when registering. The registered major is mainly based on your academic qualifications and what you are engaged in. It is divided according to specific professional work!

⑤ Are there any differences between the professional distinctions of consulting engineers and reference books?

The examination consists of "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision-making" Analysis and Evaluation" and "Modern Consulting Methods and Practice" *** 4 subjects. When taking the exam, candidates should bring a pen or pen (black), 2B pencil, eraser, and calculator (silent, without editing and storage functions). Scratch paper is distributed by local personnel examination centers and will be taken back after use.

The question type of the "Modern Consulting Methods and Practices" subject examination is subjective. It is marked online and answered on a dedicated answer sheet. Notes: 1. Please read the answering notes carefully before answering the question (answer sheet Home page); 2. Strictly follow the instructions and answer within the valid area according to the location indicated by the question number; 3. To ensure the scanning quality, you must use a pen or signature pen (black) to answer; 4. The marking of this subject is conducted by the National Unified organization and implementation, specific matters will be notified separately.

⑥ There are several majors for registered consulting engineers

There are three majors. The major requirements for registered consulting engineers are engineering disciplines, or economics, management science and engineering Class major. The application requirements for registered consulting engineers are as follows:

1. Obtain a college degree in an engineering discipline, or a college degree in economics, management science and engineering, and have been engaged in engineering consulting business for a total of 8 years.

2. Obtain a bachelor's degree or degree in engineering disciplines, or majors in economics, management science and engineering, and have been engaged in engineering consulting business for a total of 6 years.

3. Obtain a double bachelor's degree in an engineering discipline, or majors in economics, management science and engineering, or graduate from a graduate class in an engineering discipline, and have been engaged in engineering consulting business for a total of 4 years .

4. Obtain a master's degree in engineering disciplines, or majors in economics, management science and engineering, and have been engaged in engineering consulting business for a total of 3 years.

5. Obtain a doctoral degree in engineering disciplines, or majors in economics, management science and engineering, and have been engaged in engineering consulting business for a total of 2 years.

6. Those who have obtained the above-mentioned academic qualifications or degrees in other majors in economics and management, or other majors in other disciplines, will have a corresponding increase in the cumulative number of years engaged in engineering consulting business by 2 years.

(6) Do consulting engineers still have majors? Further reading

Examination unit:

The Ministry of Personnel and the National Development and Reform Commission are jointly responsible for national registration Policy formulation, organization, coordination, supervision and guidance of the Consulting Engineer (Investment) Qualification System, and the establishment of the National Registered Consulting Engineer (Investment) Qualification Management Committee, which is responsible for the management of the Registered Consulting Engineer (Investment) Qualification. The committee's office is located in China Engineering Consulting Association.

Subject setting:

The examination subjects are divided into "Macroeconomic Policy and Development Planning", "Project Organization and Management", "Project Decision Analysis and Evaluation", "Modern Consulting Methods" and Practice" and other four subjects.

⑦ How to define the consulting engineer major

1. There are two situations:

When registering for the first time, you can apply for a major major and a minor major, regardless of Two diplomas are required;

When changing registration and adding a minor major, you need to provide proof of more than one year of professional education related to the minor major.

Therefore, try to apply for both the major and minor major when registering for the first time.

2. In case of mismatched majors:

First of all, the requirements for working years are longer than those of professional counterparts. Secondly, it mainly depends on whether the reported performance is relevant.

⑧ How are registered consulting engineers classified?

The exam is not classified

After passing the exam, you need to register for a major. At this time, there are professional classifications (31 categories )

(1) Highways; (2) Railways; (3) Urban rail transit; (4) Civil aviation; (5) Hydropower; (6) Nuclear power and nuclear industry; (7) Thermal power; (8) ) Coal; (9) Petroleum and natural gas; (10) Petrochemicals; (11) Chemical industry and medicine; (12) Building materials; (13) Machinery; (14) Electronics; (15) Light industry; (10) 6) Textiles and chemical fibers; (17) Steel; (18) Non-ferrous metallurgy; (19) Agriculture; (20) Forestry; (21) Communications and information; (22) Radio, film and television; (2) 13) Hydrogeology, engineering surveying, geotechnical engineering; (24) Water conservancy engineering; (25) Port and river engineering; (26) Ecological construction and environmental engineering; (27) Municipal public works ; (28) Architecture; (29) Urban planning; (30) Comprehensive economics (not subject to specific major restrictions) (31) Others (application based on specific majors, such as: tourism engineering, commercial grain, Meteorological engineering, land resources, land consolidation, poverty alleviation projects, immigration projects, ocean engineering, new energy, etc.).

⑨ How are consulting engineer majors classified?

Regulations on the classification of registered consulting engineer (investment) majors

1. According to the Ministry of Personnel and the State Planning Commission [ 2001] No. 127 Document No. 19: "The professional categories of registered consulting engineers (investment) shall be separately determined by the National Registered Consulting Engineer (Investment) Qualifications Management Committee", and these regulations are specially formulated.

2. The principles for classifying professional categories are:

1. Combined with the reality that our country has joined the World Trade Organization, consider the requirements of integrating with internationally accepted rules;

2. Based on the actual combination of engineering technology coverage and industry management;

3. It is conducive to promoting the gradual integration of the unit qualification accreditation system with the individual professional qualification system;

4. Conducive to the development of personal potential and talent flow of registered consulting engineers (investment);

5. Try to make full use of the existing engineering consulting management platform to simplify operations.

3. The individual professional professional categories of registered consulting engineers (investment) are divided as follows:

1. Transportation (including railways, highways, urban rail transit, civil aviation, ports and waterways)

2. Water conservancy and hydropower (including water conservancy and hydropower)

3. Electronic information (including electronics, communication information, radio, film and television, etc.)

4. Agriculture and forestry (including agriculture, animal husbandry, fishery, and forestry)

5. Mining and mineral processing (including metallurgical mines, non-metallic mines, coal, steel, non-ferrous metallurgy, gold, building materials, etc.)

6. Petroleum (including oil and natural gas development and mining projects)

7. Chemical and pharmaceutical industry (including chemical industry, medicine, petroleum processing, etc.)

8. Power transmission and transformation (including thermal power generation, wind power generation, new energy, power transmission and transformation projects, etc.)

9. Nuclear engineering (including nuclear industry, nuclear power)

10. Machinery (including machinery, ships, weapons, aviation, aerospace, etc.)

11. Light industry (including light industry, food, etc.)

12. Textiles (including textiles and chemical fibers)

13. Environmental Engineering

14. Construction and municipal administration (including construction, urban planning, water supply and drainage, gas, heating, warehousing, urban roads, etc.)

15. Engineering Technology and Economic Management

4. The individual professional specialty of registered consulting engineer (investment) shall be reported to the local or industry preliminary review agency according to the management system according to the above 15 majors.

5. Registered consulting engineers (investment) shall declare no more than two professional professions individually. When applying for two majors, one major should be the main one.

6. In order to adapt to the development of the national economy and science and technology, the practice of registered consulting engineers (investment) requires new majors, which can be supplemented separately.

7. The National Registered Consulting Engineer (Investment) Qualification Management Committee is responsible for the interpretation of these regulations.

8. These regulations will be implemented from the date of promulgation.

⑩ What are the majors of registered consulting engineers?

The majors of registered consulting engineers:

1. Registered consultants are divided into highways, railways, urban rail transit, and civil aviation. , hydropower, nuclear power, nuclear industry, thermal power, coal, oil and gas, petrochemicals, chemical industry, medicine, building materials, machinery, electronics, light industry, textile, chemical fiber, steel, non-ferrous metallurgy, agriculture, forestry, communications, hydrogeology, engineering Surveying, geotechnical engineering, water conservancy engineering, port and river engineering, ecological construction and environmental engineering, municipal public engineering, architecture, urban planning and other majors.

2. Registered consulting engineer (investment) refers to those who have passed the national unified examination and obtained the "Registered Consulting Engineer (Investment) Qualification Certificate of the People's Republic of China". After registration, they can work in economic construction. Professional and technical personnel engaged in engineering consulting business.