How to use self-service gas stations in the United States?

Materials/Tools: Bank card

Specific steps:

1. Insert the bank card. After inserting the bank card, do not leave it in but take it out immediately. In the picture, there is also a prompt on the refueling machine that says "insert and remove card quickly (insert and remove card quickly)". Although the bank card has been pulled out, the refueling machine has already obtained the card information, so you can refuel normally without a bank card. .

2. Select the bank card, choose debit card (debit card) or credit card (credit card). You can also see that there is no bank card in the card slot in the picture.

The white text prompts in the blue area use the white buttons around the display to select, or use another set of buttons above the printed receipt (receipt) on the left.

3. Enter the zip code. The zip code here is the zip code of the credit card billing address, which is generally known only to the card owner. And usually you fill up at a gas station near your home, that is, near your billing address.

4. Pick up the gun, select the fuel number and refuel. After entering the zip code, the screen will say "Remove Nozzle, Select Grade and begin fueling (remove the oil gun, select the oil number and start fueling)" and then you can refuel. Nozzle is the oil gun, Grade is the oil number, and fueling is refueling. Selecting the oil number is very simple, just press the button of the corresponding oil number.

5. Selecting the oil number is very simple, just press the button of the corresponding oil number.

6. Put back the oil gun to finish refueling. After the fuel tank is full, the screen displays "Replace Nozzle when Fueling is complete (replace the fuel nozzle when fueling is complete)." At this point, put back the fuel nozzle and refueling is over.