What are the requirements for taking the water conservancy engineer exam?

Requirements for applying for a registered engineer in water conservancy

1. Obtain a degree in this major (referring to water conservancy and hydropower engineering, hydrology and water resources engineering, agricultural water conservancy engineering, Soil and water conservation and desertification control majors, etc.) or similar majors (referring to port, waterway and coastal engineering, civil engineering, exploration technology and engineering, etc.) bachelor degree or above.

2. Obtain a college degree in this major or a similar major, and have been engaged in water conservancy and hydropower engineering survey and design for a total of 1 year.

3. Obtain a bachelor's degree or above in other engineering majors, and have been engaged in water conservancy and hydropower engineering survey and design work for a total of 1 year.

Registered civil engineers are divided into four majors: geotechnical, port and waterway engineering, water conservancy and hydropower engineering, and road engineering. Those who pass the registered civil engineer qualification examination will be issued the "Practice Qualification Certificate of the People's Republic of China and the State Registered Civil Engineer" uniformly printed by the Ministry of Personnel and stamped by the Ministry of Personnel and the Ministry of Construction by the personnel administration department of each province, autonomous region, and municipality directly under the Central Government. The certificate is valid nationwide. (1) Extended reading on the conditions for taking the water conservancy engineer exam

Examination method

The exam is divided into two parts: a basic exam and a professional exam. Only those who pass the basic examination can apply for the professional examination. The basic exam is an objective test with answers on the answer sheet. The professional examination is divided into two parts: "Professional Knowledge Examination" and "Professional Case Examination". The "Professional Knowledge Examination" is an objective question with answers on the answer sheet.

The "Professional Case Examination" adopts a combination of subjective and objective examination methods, that is, candidates are required to write out the calculation process on the answer sheet while filling in the answer sheet. The "Professional Examination" is an open-book examination, and candidates are allowed to bring various professional specifications and reference books published by regular publishing houses; the "Basic Examination" is a closed-book examination.

2. I want to apply for the water conservancy and hydropower engineer exam and what are the requirements.

Search the Internet for the registration portal for the 2019 Civil Engineer (Water Conservancy and Hydropower) Examination, and just register.

Those who meet one of the following conditions can apply to take the basic examination:

1. Obtained a bachelor's degree in this major (referring to water conservancy and hydropower engineering, hydrology and water resources engineering, agricultural water conservancy engineering , Soil and Water Conservation and Desertification Control) or similar majors (referring to port, waterway and coastal engineering, civil engineering, exploration technology and engineering, etc.) bachelor degree or above.

2. Obtain a college degree in this major or a similar major, and have been engaged in water conservancy and hydropower engineering survey and design work for a total of 1 year.

3. Obtain a bachelor's degree or above in other engineering majors, and have been engaged in water conservancy and hydropower engineering survey and design work for a total of 1 year.

3. Application requirements for water conservancy assistant engineers

Assistant engineers do not need any professional titles, only a diploma in relevant majors. It mainly depends on the length of working experience. Assistants in some industries also need to take exams.

For those majoring in civil engineering or water conservancy, with the title of assistant engineer, after receiving the diploma, you need to apply to the talent market or the company where you work and pay an annual fee, which is about 400 yuan. You can become an assistant engineer after two years, and you can become an assistant engineer within two years of graduation. After this year, you will be eligible to apply for the Level 2 Construction Engineer Certificate. I strongly hope you can pass the exam because the Level 2 Construction Engineer can serve as a project manager certificate in the past and can also generate value if rented to other companies.

The four certificates required for water conservancy and hydropower engineering

The certificates required for water conservancy engineering majors include intermediate professional title engineer certificate, senior engineer certificate, water conservancy construction engineer second level, and first level construction engineer , water conservancy project cost engineer, water conservancy project supervision engineer.

The higher the value of the above, the more years of working experience are required. You can search for details. I have copied a lot of relevant information on the Internet, but the number of words is not enough. Because you currently have no work experience, it is more appropriate to take the five major exams, or you can also take the basic exams for these relatively high-value certificates.

What are the certificates that can be taken for water conservancy and hydropower engineering:

1. Water conservancy and hydropower engineering belongs to the engineering or engineering economics category, and most professional qualification certificates in the engineering category can be applied for.

2. For example: registered civil engineer, construction engineer, supervisor, cost engineer, consulting engineer, real estate appraiser, registered safety engineer, tenderer, highway water transportation supervision engineer of the Ministry of Transport, highway cost engineer of the Ministry of Transport , test and inspection engineer of the Ministry of Communications, etc.

5. What are the requirements and tests required to become a water conservancy engineer?

In terms of job titles, there are assistant engineer, engineer, intermediate engineer and senior engineer.

In terms of professional qualification certificates, there are national registered first- and second-level construction engineers, national registered structural engineers, registered supervisors, etc.

Which courses should be taken by the Sixth Water Conservancy and Hydropower Engineer?

The main examination contents of the Water Conservancy and Hydropower Engineer include:

1. Construction management of construction projects;

2. Construction engineering regulations and related knowledge;

3. Professional engineering management and practice 1. Students majoring in water conservancy and hydropower engineering mainly study water conservancy and hydropower engineering;

Water conservancy and hydropower engineering training Senior engineering and technical talents who have knowledge in surveying, planning, design, construction, scientific research and management of water conservancy and hydropower projects and can engage in planning, design, construction, scientific research and management in water conservancy, hydropower and other departments.

Students majoring in water conservancy and hydropower engineering mainly learn the basic theories and basic knowledge of mathematics, mechanics and building structures necessary for the construction of water conservancy and hydropower projects, so that students can acquire the necessary engineering design methods, construction management methods and scientific knowledge. Basic training in research methods, and basic abilities in water conservancy and hydropower engineering survey, planning, design, construction, scientific research and management.

Engineer is a type of professional level assessment (professional title assessment). Below it, there are professional titles such as technician and assistant engineer; above it, there are professional titles such as senior engineer, researcher or professor-level senior engineer. Of course, this is just a calibration of the technical level of personnel engaged in engineering construction or management.

According to the level of professional titles (qualifications), they are divided into: researcher or professor-level senior engineer (senior), senior engineer (deputy senior), engineer (intermediate), and assistant engineer (junior).

Evaluation conditions for seven senior water conservancy engineers

Normal application conditions for senior engineers:

(1) Graduated from a university, engaged in professional work for more than ten years, and served as an intermediate Position for more than five years.

(2) Graduated from a junior college, engaged in professional and technical work for more than fifteen years, and held an intermediate position for more than five years.

(3) Graduated from technical secondary school or high school, engaged in professional and technical work for more than 25 years, and held an intermediate position for more than five years.

Those who meet the above application conditions must also abide by laws and regulations, have good professional ethics, be able to conscientiously perform their job responsibilities, make outstanding achievements in their professional positions, and have corresponding professional theoretical levels and Practical work ability.

(7) Extended reading on the conditions for taking the water conservancy engineer exam

Requirements for senior water conservancy engineers:

1. Have a major in solving production processes or comprehensive technical management Ability to address important technical issues in the field.

2. Have systematic and extensive professional basic theoretical knowledge and professional technical knowledge, and master the current situation of the major at home and abroad and the development trend of modern management.

3. Have rich practical experience in production and technical management, and have significant achievements and social and economic benefits in production and technical management.

4. Ability to guide engineers’ work and study.

8. Requirements for applying for the basic examination of registered civil engineers (water conservancy and hydropower engineering)

According to the "Notice on Issuance and Distribution" (Guorenbufa [2005] No. 58) and " According to the spirit of the "Notice on the Issuance of the Notice" (Guo Ren Ting Fa [2005] No. 116), starting from September 1, 2005, the state will implement a professional access system for professional and technical personnel engaged in water conservancy and hydropower engineering survey and design activities, and will be included in the national Unified planning for the professional qualification certificate system for professional and technical personnel. Registered civil engineers (water conservancy and hydropower engineering) are selected according to five professional directions: water conservancy and hydropower engineering planning, hydraulic structure, water conservancy and hydropower engineering geology, water conservancy and hydropower engineering immigration, and water conservancy and hydropower engineering soil and water conservation. Candidates can choose a major based on actual work conditions.

Registered Civil Engineer (Water Resources & Hydropower Engineering), English translation: (Waterresources&Hydropower) refers to obtaining the "Qualification Certificate of the People's Republic of China and the State Registered Civil Engineer (Water Resources and Hydropower Engineering)" (hereinafter referred to as the Qualification Certificate) through examination and registration in accordance with the law. "Registered Practice Certificate of the People's Republic of China and the State Registered Civil Engineer (Water Conservancy and Hydropower Engineering)" (hereinafter referred to as the registration certificate) and practice seal, professional and technical personnel engaged in water conservancy and hydropower engineering survey, design and related business. 1. Organize and lead the Ministry of Construction, the Ministry of Water Resources, and the Ministry of Personnel to jointly be responsible for the qualification examination for registered civil engineers (water conservancy and hydropower engineering), and entrust the Personnel Examination Center of the Ministry of Personnel to undertake the examination work. The examination work in each province, autonomous region, and municipality directly under the Central Government shall be organized and implemented by the local personnel administrative department in conjunction with the construction administrative department. The specific division of responsibilities shall be determined through consultation between localities. 2. Scope of application Suitable for survey, design and related businesses engaged in hydraulic and hydropower projects (including water conservancy hubs, hydropower stations, pumped storage power stations, water diversion, irrigation and drainage, urban flood control projects, reclamation projects, river management projects, soil and water conservation, etc.) professional and technical personnel. 3. Examination time and subject setting The qualification of registered civil engineer (water conservancy and hydropower engineering) shall be subject to the national unified examination system with unified syllabus and unified propositions. In principle, it shall be held once a year. The registered civil engineer (water conservancy and hydropower engineering) qualification examination consists of two parts: a basic examination and a professional examination. Those who pass the basic examination and meet the registration conditions for professional examinations stipulated in this law may register for professional examinations. Only after passing the professional examination can you obtain the "Registered Civil Engineer (Water Conservancy and Hydropower Engineering) Qualification Certificate of the People's Republic of China and the State". The basic exam is divided into two half-days, each lasting 4 hours. The professional examination is divided into two parts: professional knowledge and professional cases. Each part lasts for two and a half days, and each half-day lasts for three hours. 4. Application conditions (1) Basic conditions All citizens of the People's Republic of China who abide by national laws and regulations, abide by professional ethics, and have corresponding professional education and professional practice conditions can apply for the registered civil engineer (water conservancy and hydropower) Engineering) qualification examination. (2) Those who meet the basic requirements and meet one of the following conditions can apply to take the basic examination: 1. Obtained the major (referring to water conservancy and hydropower engineering, hydrology and water resources engineering, agricultural water conservancy engineering, soil and water conservation and desertification control major, For details (see Appendix 1, the same below) or similar majors (referring to majors such as port and waterway and coastal engineering, civil engineering, exploration technology and engineering, etc., see Appendix 1 for details, the same below), a bachelor's degree or above. 2. Obtain a college degree in this major or a similar major, and have been engaged in water conservancy and hydropower engineering survey and design work for a total of 1 year. 3. Obtain a bachelor's degree or above in other engineering majors, and have been engaged in water conservancy and hydropower engineering survey and design work for a total of 1 year. (3) Those who pass the basic examination and meet one of the following conditions can apply to take the professional examination: 1. After obtaining a doctoral degree in this major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 2 years; or after obtaining a doctoral degree in a similar major , has been engaged in water conservancy and hydropower engineering survey and design work for a total of 3 years. 2. After obtaining a master's degree in this major, they have been engaged in water conservancy and hydropower engineering survey and design work for a total of 3 years; or after obtaining a master's degree in a similar major, they have been engaged in water conservancy and hydropower engineering survey and design work for a total of 4 years. 3. After obtaining a double bachelor's degree in this major or graduating from a graduate class in this major, and engaging in water conservancy and hydropower engineering survey and design work for a total of 4 years; or after obtaining a double bachelor's degree in a similar major or graduating from a graduate program in this major, He has been engaged in water conservancy and hydropower engineering survey and design work for a total of 5 years. 4. After obtaining an undergraduate degree or degree that has passed the educational evaluation of this major, he has been engaged in water conservancy and hydropower engineering survey and design work for a total of 4 years; or after obtaining an undergraduate degree or degree that has not passed the educational evaluation of this major, he has been engaged in water conservancy and hydropower engineering for a total of 4 years. 5 years of survey and design work; or 6 years of cumulative experience in survey and design of water conservancy and hydropower projects after obtaining a bachelor's degree or degree in a similar major. 5. After obtaining a college degree in this major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 6 years; or after obtaining a college degree in a similar major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 7 years. 6. After obtaining a bachelor's degree or above in other engineering majors, have been engaged in water conservancy and hydropower engineering survey and design work for a total of 8 years.

(4) As of December 31, 2002, those who meet one of the following conditions are exempt from the basic examination and only need to take the professional examination: 1. After obtaining a doctorate in this major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 5 years ; Or after obtaining a doctorate in a similar major, he has been engaged in water conservancy and hydropower engineering survey and design work for a total of 6 years. 2. After obtaining a master's degree in this major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 6 years; or after obtaining a master's degree in a similar major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 7 years. 3. After obtaining a double bachelor's degree in this major or graduating from a graduate class in this major, and engaging in water conservancy and hydropower engineering survey and design work for a total of 7 years; or after obtaining a double bachelor's degree in a similar major or graduating from a graduate program in this major, He has been engaged in water conservancy and hydropower engineering survey and design work for a total of 8 years. 4. After obtaining a bachelor's degree or degree in this major, he has been engaged in survey and design of water conservancy and hydropower projects for a total of 8 years; or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in survey and design of water conservancy and hydropower projects for a total of 9 years. 5. After obtaining a college degree in this major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 9 years; or after obtaining a college degree in a similar major, they have been engaged in water conservancy and hydropower engineering survey and design for a total of 10 years. 6. After obtaining a bachelor's degree or above in other engineering majors, have been engaged in water conservancy and hydropower engineering survey and design work for a total of 12 years. 7. After obtaining a college degree in other engineering majors, have been engaged in water conservancy and hydropower engineering survey and design work for a total of 15 years. 8. After obtaining a technical secondary school degree in this major, he has been engaged in water conservancy and hydropower engineering survey and design work for a total of 25 years; or after obtaining a technical secondary school degree in a similar major, he has been engaged in water conservancy and hydropower engineering survey and design work for a total of 30 years. Note: The requirements for academic qualifications or degrees in the application conditions refer to the formal academic qualifications or degrees recognized by the national education administrative department. The requirements for the number of years of working in the corresponding profession in the application conditions refer to the total number of working hours before and after obtaining the required academic qualifications. Its deadline is the end of 2007. 5. Examination registration. Examination registration adopts a method that combines online registration and on-site review. 6. Performance management. Those who take the registered civil engineer (water conservancy and hydropower engineering) examination must pass the examination in all subjects within one examination year. 7. Qualification certificates Those who pass the qualification examination will be entrusted by the Ministry of Personnel, the Ministry of Construction and the Ministry of Water Resources to the personnel administrative departments of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government to issue a certificate uniformly printed by the Ministry of Personnel and printed by the Ministry of Personnel, the Ministry of Construction and the Ministry of Water Resources. Qualification Certificate for Registered Civil Engineer (Water Conservancy and Hydropower Engineering) of the People's Republic of China and the People's Republic of China". 8. The qualification of registered civil engineer (water conservancy and hydropower engineering) shall be subject to the registration practice management system. The Ministry of Construction and the Ministry of Water Resources are the approval agencies for the qualification registration of registered civil engineers (water conservancy and hydropower projects). The construction administrative departments of the People's Government of provinces, autonomous regions, and municipalities directly under the Central Government are the review agencies for the qualification registration of registered civil engineers (water conservancy and hydropower projects). Each registration period for registered civil engineers (water conservancy and hydropower engineering) is valid for 3 years.

9. What are the professional requirements for the professional title assessment of water conservancy engineer?

There are requirements.

Qualifications awarded through evaluation to personnel engaged in professional technical and management positions after reaching a certain number of professional years and achieving certain work performance. A qualification for professional and technical personnel (managers), it is not a position.

After a certain number of working years and completing the corresponding continuing education hours during the tenure, those applying for intermediate professional titles or above must publish papers in professional journals and pass some basic skills examinations (such as: competent foreign language and computer Application ability examination, etc.), submit evaluation materials to the evaluation committee of the major, and the professional judges of the major will determine whether they have the qualifications for a higher-level professional title.

(9) Extended reading on the conditions for being admitted as a water conservancy engineer

Year requirements:

1. Have a master's degree and have been engaged in professional technical work for 2 years;

2. Have a graduate degree or a second bachelor's degree, have been engaged in professional and technical work for 4 years, and have been in assistant-level positions for 4 years;

3. Have a bachelor's degree, and have been engaged in professional and technical work for 5 years years, and have held assistant-level positions for 4 years;

4. Have a college degree, have been engaged in professional and technical work for 7 years, and have held assistant-level positions for 4 years.

5. Those who do not have the required academic qualifications, but do have real talent and practical knowledge, have outstanding achievements, and meet one of the following conditions.

Professional titles are linked to wages and benefits, as well as job promotions. They are a stepping stone for job hunting and a basis for hiring professional and technical positions. For qualified enterprises, professional titles are necessary conditions for business opening, qualification rating assessment, qualification upgrade, and annual qualification review.

What are the requirements for applying for the title of deputy senior water conservancy engineer?

The evaluation requirements for the professional title of deputy senior water conservancy engineer in Nanjing are as follows: summarized by Zhiju Culture Media:

① Educational qualifications (available on Xuexin.com)

Educational qualifications consistent with the major studied: after obtaining an intermediate professional title with a bachelor's degree, engage in technical work in this major for 5 years; after obtaining an intermediate professional title with a junior college degree, engage in technical work in this major for 7 years Years

The majors studied are inconsistent with the academic qualifications: after obtaining the intermediate professional title with a bachelor's degree, he has been engaged in the professional and technical work for 7 years; after obtaining the intermediate professional title with the associate degree, he has been engaged in the professional and technical work for 9 years

For example: the academic qualifications of the majors studied are consistent: graduated from junior college in 2000, obtained an intermediate professional title in 2010, and the years are calculated from 2011 (the year of graduation in 2010 is not counted) and you can participate in the evaluation in 2018.

②Existing professional title: Intermediate engineer (and intermediate evaluation form) or first-level construction engineer certificate, registration certificate.

③Social security: Social security in Nanjing for one year (automatically verified by the system).

④ Papers: At least two papers must be published in journals at or above the provincial level. Papers must be checked for plagiarism via CNKI.

⑤Class hours: 360 hours of continuing education are required.

⑥Achievements: More than four are required.

⑦ Application for other academic qualifications:

Those who have obtained a master's degree or intermediate professional title and have engaged in professional and technical work for more than 4 years can apply for a senior professional title;

Obtained A doctorate degree, after obtaining an intermediate professional title, and engaging in professional and technical work for more than 2 years can apply for a senior professional title.